• Progress in Medical Physics
• /
• v.21 no.4
• /
• pp.340-347
• /
• 2010

DQA, a patient specific quality assurance in tomotherapy, is usually performed using an ion chamber and a film. The result of DQA is analysed with the treatment planning system called Tomo Planning Station (TomoPS). The two-dimensional dose distribution of film measurement is compared with the dose distribution calculated by TomoPS using the ${\gamma}$-index analysis. In ${\gamma}$-index analysis, the criteria such as 3%/3 mm is used and we verify that whether the rate of number of points which pass the criteria (pass rate) is within tolerance. TomoPS does not provide any quantitative information regarding the pass rate. In this work, a method to get the pass rate of the ${\gamma}$-index analysis was suggested and a software PassRT which calculates the pass rate was developed. The results of patient specific QA of the intensity modulated radiation therapy measured with I'mRT MatriXX (IBA Dosimetry, Germany) and DQA of tomotherapy measured with film were used to verify the proposed method. The pass rate was calculated using PassRT and compared with the pass rate calculated by OmniPro I'mRT (IBA Dosimetry, Germany). The average difference between the two pass rates was 0.00% for the MatriXX measurement. The standard deviation and the maximum difference were 0.02% and 0.02%, respectively. For the film measurement, average difference, standard deviation and maximum difference were 0.00%, 0.02% and 0.02%, respectively. For regions of interest smaller than $24.3{\times}16.6cm^2$ the proposed method can be used to calculate the pass rate of the gamma index analysis to one decimal place and will be helpful for the more accurate DQA in tomotherapy.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.1
• /
• pp.43-50
• /
• 2005

We proposed a method for embedding coded binary data into EZW bitstreams and extracting embedded data from EZW bitstreams using the traditional EZW decoder. EZW coder have two passes. The first pass, the dominant pass have four symbols, P, N, IZ, ZTR. The second pass is sub-ordinary pass which specifies the value of symbol. In the proposed methods, we use ZTR symbol in the dominant pass. We embed watermark into ZTR symbol in the highest frequency band which original image is transferred by wavelet transform. The proposed digital watermarking method shows good properties for robustness in the low bit rate. Accordingly, based on the proposed digital watermarking, video and 3D image watermarking will become a new area for research in the near future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1124-1131
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level (SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles (automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces (dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of all vehicle types, has il strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.421-427
• /
• 2006

This paper presents a novel method to determine sound power level(PWL) emitted by a travelling vehicle for road traffic noise simulation. The PWL is evaluated by the equivalent sound pressure level(SPL) measured by close proximity method and the sound power correction factor derived from the maximum SPL measured by pass-by method and the propagation attenuation of vehicle noise during the pass-by measurement. Using the method, we derive the empirical formula for PWL estimation in 1/1-octave and overall frequency bands for 8 vehicles(automobile, SUV, small truck, large bus, trailer, 3 dump trucks) tested at two road surfaces(dense graded asphalt, 30mm transverse tinning concrete) of Korean highway test road. The suggested approach, if securing sufficient data to represent the acoustic characteristics of au vehicle types, has a strong merit to be able to evaluate sound power levels for any combination of vehicle categories and traffic volumes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.5
• /
• pp.250-257
• /
• 1985

High order filters are usually realized by cascading second order stages. In this paper, a simple method of pole-zero pairing in the high order band-pass and band-reject filter realization of the elliptic functions is proposed for the enhancement of overall dynamic range. Futrhermore, the optimum sequence of the various biquads of high-pass notch, low-pass notch and symmetrical notch etc., is developed for the elliptic band-pass and band-reject filters.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.145-151
• /
• 2008

This paper proposes the PLL method using positive sequence voltage which is estimated by full-order state observer to find an accurate phase angle under the condition of unbalanced utility voltage. The proposed method uses the full-order state observer instead of existing method(APF All Pass Filter) to find a positive sequence of a utility voltage and this proposed method improves transient response of an estimated phase angle when a three-phase utility voltage becomes unbalanced. To compare proposed method withexisting method, experiments have been done for a phase angle detection of utility voltage when a three-phase utility voltage becomes unbalanced. Their results show that transient state response of proposed method is improved.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.21-30
• /
• 1999

Several kinds of design method for the hairpin type band-pass filter have been reported. The conventional design methods have some restrictions in characteristic impedance of coupled line section, which provide complexities to designer. In this paper, the novel design formulas for the hairpin type band pass filter have been derived and proposed to resolve the problems of the reported design methods. By employing the equivalent circuit of the coupled line section and band pass filter design theory, the design procedures and formulas are derived. The hairpin type RX/TX band pass filters for the IMT-2000 service have been designed, fabricated with duplexer configuration, and then measured to show the validity of the proposed design method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.335-340
• /
• 2005

The forward dissolution rate of a borosilicate waste glass was determined as an interlaboratory study(ILS) testing program for the evaluation of precision in the measurement of the dissolution rate or a waste glass using a single-pass flow-through(SPFT) test, whose conducting practice has been written for standardization through American Society for Testing and Materials (ASTM). A simulated low-activity waste glass powder with a size of 100/200 mesh was dissolved by lithium buffer solution (pH=10) at 70? under Ar atmosphere. By plotting the dissolution rates as a function of silicon and boron concentration in eluate, the forward dissolution rate of the glass was obtained as about $2.7\times10^{-5}g{\cdot}m{\cdot}s^{-1}$ in our laboratory.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1065-1072
• /
• 2012

In this paper, the method of design of the waveguide band-pass filter and limiter in radar system is proposed. First, we design a self-resonant iris, which can behave as a band-pass filter by mounting the PIN diode on the iris. When low power microwave is incident on the proposed element, the element behaves as a band-pass filter. Under a high power microwave condition, however, the element behaves as a limiter having wide band stop characteristics. The fabricated element has a pass band with -0.7 dB insertion loss at 10 GHz under the low power condition and isolation about 25 dB under the high power condition.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.58-63
• /
• 2000

This paper describes an efficient algorithm for shot boundary detection in MPEG video stream. There are two types of shot boundary: abrupt and gradual. The proposed algorithm for detecting the abrupt shot boundaries used DCT DC value in compressed domain. The proposed algorithm of the gradual change detection consists of two-pass mechanism. In the first pass, the expected positions of shot boundaries are extracted using ratio value of motion vectors. After decoding frames that are extracted in the first pass, we will make the dissolving image using (n)th and (n+2)th image of expected position. The gradual shot boundaries are selected by similarity of the dissolving image and the image of (n+1)th expected position. As applying the algorithm for detecting shot boundaries, the gradual changes as well as the abrupt changes are detected efficiently. Experimental results indicate that the proposed method is computationally fast for detecting shot boundaries and robust to the variation of the video characteristic that is different for the kind of videos.