• Journal of applied mathematics & informatics
• /
• v.33 no.1_2
• /
• pp.211-217
• /
• 2015

A dynamic spectrum access scheme with channel partitioning for secondary handover calls in cognitive radio networks is proposed to reduce forced termination probability due to spectrum handover failure. A continuous-time Markov chain method for evaluating its performance such as blocking probability, forced termination probability, and throughput is presented. Numerical and simulation results are provided to demonstrate the effectiveness of the proposed scheme with channel partitioning.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.838-844
• /
• 2013

In this paper, we propose a novel spectrum sensing scheme based on sensing time partitioning for cognitive radio systems in high traffic environments. Specifically, we partition a sensing time into K sub-sections, and then, propose a spectrum sensing scheme that determines if a primary user signal is present based on the sensing results on the partitioned sub-sections. From numerical results, it is confirmed that the proposed scheme outperforms the conventional schemes in high traffic environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.565-572
• /
• 2007

3G Long Term Evolution (3G LTE) is a next generation cellular networks system capable or providing various mobile multimedia services by using OFDMA and MIMO based radio access technology. Among many differences from existing WCDMA based systems, the facts that 3G LTE uses Physical Resource Block (PRB) as its radio resources and provides all services through the PS domain make the development of new resource management schemes necessary. This paper proposes an adaptive partitioning based downlink call admission control scheme. It separates realtime call requests from non-realtime ones, specifies maximum allowable resource amounts for each type, but if the maximum is exceeded, call requests are accepted with probability proportional to remaining resource amounts. Despite the fact that such adaptive concept has been already adopted by other call admission schemes, the contributions of our paper, which are that we are able to find an efficient way to apply the proposed scheme exploiting PRB characteristics and measure the resource usage of base stations by PRB utilization and payload ratio, are still valid. When judging from simulation results in comparison with others, our scheme is able to prioritize realtime call requests over non-realtime ones, and at the same time, overall system performance is superior.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.497-504
• /
• 2008

In a study of the optimum operational condition for a melting decontamination, the effects of the basicity, slag type and slag composition on the distribution of depleted uranium were investigated for radioactively contaminated metallic wastes of iron-based metals such as stainless steel (SUS 304L) in a direct current graphite arc furnace. Most of the depleted uranium was easily moved into the slag from the radioactive metal waste. The partitioning ratio of the depleted uranium was influenced by the amount of added slag former and the slag basicity. The composition of the slag former used to capture contaminants such as depleted uranium during the melt decontamination process generally consists of silica ($SiO_2$), calcium oxide (CaO) and aluminum oxide ($Al_2O_3$). Furthermore, calcium fluoride ($CaF_2$), magnesium oxide (MgO), and ferric oxide ($Fe_2O_3$) were added to increase the slag fluidity and oxidative potential. The partitioning ratio of the depleted uranium was increased as the amount of slag former was increased. Up to 97% of the depleted uranium was captured between the ingot phase and the slag phase. The partitioning ratio of the uranium was considerably dependent on the basicity and composition of the slag. The optimum condition for the removal of the depleted uranium was a basicity level of about 1.5. The partitioning ratio of uranium was high, exceeding $5.5{\times}10^3$. The slag formers containing calcium fluoride ($CaF_2$) and a high amount of silica proved to be more effective for a melt decontamination of stainless steel wastes contaminated with depleted uranium.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.509-515
• /
• 2004

We present results from an extensive synthetic observation analysis of numerically-simulated radio galaxy (RG) jets. This analysis is based on the first three-dimensional simulations to treat cosmic ray acceleration and transport self-consistently within a magnetohydrodynamical calculation. We use standard observational techniques to calculate both minimum-energy and inverse-Compton field values for our simulated objects. The latter technique provides meaningful information about the field. Minimum-energy calculations retrieve reasonable field estimates in regions physically close to the minimum-energy partitioning, though the technique is highly susceptible to deviations from the underlying assumptions. We also study the reliability of published rotation measure analysis techniques. We find that gradient alignment statistics accurately reflect the physical situation, and can uncover otherwise hidden information about the source. Furthermore, correlations between rotation measure (RM) and position angle (PA) can be significant even when the RM is completely dominated by an external cluster medium.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.187-190
• /
• 2000

We presents the construction of radio frequency pad area array package modules which operate at radio frequency of 224MHz, and proposes the structure of RF module packages to improve its electrical characteristics. The module of RF PAA package was constructed in the configuration of three dimensional stacked package and reduced size. RF PAA packages showed the optimized and improved gain of 2dB by partitioning the RF transceiver with 3 dimensional stacked PAA packages.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.20-27
• /
• 1993

In this paper, a model of TCM / M-PSK with set partitioning and a model of the combined M-ary PSK system with pragmatic coding for digital radio communication are realized. The equations of error probability for TCM / M-PSK system and the combined M-ary PSK system with pragmatic coding are derived on the conditions of the Rayleigh fading with the AWGN. It is found that the combined M-ary PSK systemwith pragmatic coding in the AWGN channel can not be applied to the fading channel since uncoded bits cause parallel:parallel paths in the trellis diagram to degrade the performance of the system. However, the use of pragmatic coding in the AWGN channel could simplify the given system since single convolutional encoder / decoder is required.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3515-3538
• /
• 2015

Data accuracy can be increased by detecting and removing the incorrect data generated in wireless sensor networks. By increasing the data accuracy, network lifetime can be increased parallel. Network lifetime or operational time is the time during which WSN is able to fulfill its tasks by using microcontroller with on-chip memory radio transceivers, albeit distributed sensor nodes send summary of their data to their cluster heads, which reduce energy consumption gradually. In this paper a powerful algorithm using proactive fuzzy system is proposed and it is a mixture of fuzzy logic with comparative correlation techniques that ensure high data accuracy by detecting incorrect data in distributed wireless sensor networks. This proposed system is implemented in two phases there, the first phase creates input space partitioning by using robust fuzzy c means clustering and the second phase detects incorrect data and removes it completely. Experimental result makes transparent of combined correlated fuzzy system (CCFS) which detects faulty readings with greater accuracy (99.21%) than the existing one (98.33%) along with low false alarm rate.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.