• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.234-237
• /
• 1997

In the Closing time in order to operate synchronous generators parallely, it is generated the asynchronous phenomena. These asynchronous phenomena give rise of the eddy current on the rotor. These eddy current are solved analytically for the Laplace' Equ. ${\nabla}^2{\widetilde{H}}=0$ in free space and for the Bullard's Equ. ${\nabla}^2{\widetilde{H}}$+${\sigma}_r{\mu}_r{\nabla}$${\times}$${\widetilde{\nu}}_r$${\times}$${\widetilde{H}}^{III}$=${\sigma}_r{\mu}_r{\frac{{\partial}H}{{\partial}t}}$ for the rotor by using each double Fourier series component of the 3D H-field

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.94-102
• /
• 2020

Considering that the output voltage and current of a single PV panel are limited in PV power generation, a PV array should be constructed by connecting several PV panels in series and parallel to meet the required voltage/power levels for power generation capacity. When a PV array is partially shaded, the maximum power generation depends on the configuration of a PV array and the presence or absence of blocking diodes. This study considers six PV array configurations and the presence or absence of blocking diodes. An optimum connection structure was proposed to maximize power generation in a partial shadow condition. Results were verified through simulation and an experiment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.1042-1045
• /
• 2007

본 논문에서는 MAI 제거 기법으로서 다단병렬간섭제거기 (MPIC : Multistage Parallel Interference Canceller) 와 부분 다단병렬간섭제거기 (partial MPIC) 및 다치진폭계수를 이용한 MPIC를 채용한 비동기 (asynchronous) DS-CDMA/M-ary QAM 시스템의 성능 개선을 이론적으로 분석하고 이를 검증하기 위한 컴퓨터 시뮬레이션을 수행하였다.연구결과에서 MPIC, partial MPIC 및 다치진폭계수를 이용한 MPIC를 실제 시스템에 적용하여 구현할 경우 BER 성능, 채널용량 개선, 신호처리 계산량 및 하드웨어 복잡도 사이에 타협 (trade-off) 이 필요하다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.42-47
• /
• 2011

The partial product matrix (PPM) of a parallel squarer is symmetric. To reduce the depth of PPM, it can be folded, shifted and rearranged. In this paper, we present an area-efficient squarer design method using new partial product rearrangement. Also, a fixed-width squarer design method of the proposed squarer is presented. By simulations, it is shown that the proposed squarers lead to up to 17% reduction in area, 10% reduction in propagation delay and 10% reduction in power consumption compared with previous squarers. By using the proposed fixed-width squarers, the area, propagation delay and power consumption can be further reduced up to 30%, 16% and 28%, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1679-1685
• /
• 2015

This paper examines the effect of the magnetization pattern on the partial demagnetization of a permanent magnet (PM) machine that uses a ferrite magnet. Although the use of halbach-magnetized PM (HMPM) arrays in PM machines has been dramatically increasing because of their attractive features, the demagnetization characteristics of HMPM arrays have not yet been examined. In this study, two analyses of the demagnetization characteristics of HMPM arrays and parallel magnetized PMs (PMPMs) are performed, with the demagnetization characteristics being analyzed using a finite element method. According to our results, partial demagnetization occurred dramatically in the HMPM arrays. Thus, it is important to consider the vulnerability of HMPM arrays when designing PM machines.

• Steel and Composite Structures
• /
• v.31 no.3
• /
• pp.233-242
• /
• 2019

Early detection of damage bonding state such as insufficient bonding strength and interface partial contact defect for the explosive clad pipe is crucial in order to avoid sudden failure and even catastrophic accidents. A generalized and efficient model of the explosive clad pipe can reveal the relationship between bonding state and vibration characteristics, and provide foundations and priory knowledge for bonding state detection by signal processing technique. In this paper, the slender explosive clad pipe is regarded as two parallel elastic beams continuously joined by an elastic layer, and the elastic layer is capable to describe the non-uniform bonding state. By taking the characteristic beam modal functions as the admissible functions, the Rayleigh-Ritz method is employed to derive the dynamic model which enables one to consider inhomogeneous system and any boundary conditions. Then, the proposed model is validated by both numerical results and experiment. Parametric studies are carried out to investigate the effects of bonding strength and the length of partial contact defect on the natural frequency and forced response of the explosive clad pipe. A potential method for identifying the bonding quality of the explosive clad pipe is also discussed in this paper.

• ETRI Journal
• /
• v.16 no.3
• /
• pp.27-41
• /
• 1994

This paper provides a performance study of multistage interconnection networks in packet switching environment. In comparison to earlier work, the model is more extensive - it includes several parameters such as multiple-packet messages, variable buffer size, and wait delay at a source. The model is also uniformly applied to several representative networks and thus provides a basis for fair comparison as well as selection of optimal values for parameters. The complexity of the model required use of simulation. However, a partial analytical model is provided to measure the congestion in a network.

• Communications of the Korean Mathematical Society
• /
• v.9 no.2
• /
• pp.449-465
• /
• 1994

The two common numerical methods to approximate the solution of partial differential equations are the finite element method and the finite difference method. They both lead to solving large sparse linear systems. For many applications, it is not unusal that the order of matrix is greater than 10, 000. For this kind of problem, a direct method such as Gaussian elimination can not be used because of the prohibitive cost. To this end, many iterative methods with modest cost have been studied and proposed by numerical analysts.(omitted)

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.802-807
• /
• 1998

The main drawback of parallel type active power filters (APF) is the large capacity required for harmonic compensation. This paper evaluates the APF capacity requirement of harmonic/reactive power compensation for thyristor converter load. Theoretically achievable maximum power factor under partial load is evaluated. And it is shown that the APF capacity can be considerably reduced while slightly sacrificing the filtering performance by deliberately limiting the peak current of the APF.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.47-50
• /
• 2001

Nowadays ARM7 core is used in many fields such as PDA systems because of the low power and low cost. It is a general-purpose processor, designed for both efficient digital signal processing and controller operations. But the advent of the wireless communication creates a need for high computational performance for signal processing. And then This paper has been designed a floating-point multiplier compatible to IEEE-754 single precision format for ARMTTDMI performance improvement.