Browse > Article
http://dx.doi.org/10.12989/scs.2019.31.3.233

Inhomogeneous bonding state modeling for vibration analysis of explosive clad pipe  

Cao, Jianbin (School of Mechanical Engineering, Xi'an Jiaotong University)
Zhang, Zhousuo (School of Mechanical Engineering, Xi'an Jiaotong University)
Guo, Yanfei (School of Mechanical Engineering, Xi'an Jiaotong University)
Gong, Teng (School of Mechanical Engineering, Xi'an Jiaotong University)
Publication Information
Steel and Composite Structures / v.31, no.3, 2019 , pp. 233-242 More about this Journal
Abstract
Early detection of damage bonding state such as insufficient bonding strength and interface partial contact defect for the explosive clad pipe is crucial in order to avoid sudden failure and even catastrophic accidents. A generalized and efficient model of the explosive clad pipe can reveal the relationship between bonding state and vibration characteristics, and provide foundations and priory knowledge for bonding state detection by signal processing technique. In this paper, the slender explosive clad pipe is regarded as two parallel elastic beams continuously joined by an elastic layer, and the elastic layer is capable to describe the non-uniform bonding state. By taking the characteristic beam modal functions as the admissible functions, the Rayleigh-Ritz method is employed to derive the dynamic model which enables one to consider inhomogeneous system and any boundary conditions. Then, the proposed model is validated by both numerical results and experiment. Parametric studies are carried out to investigate the effects of bonding strength and the length of partial contact defect on the natural frequency and forced response of the explosive clad pipe. A potential method for identifying the bonding quality of the explosive clad pipe is also discussed in this paper.
Keywords
explosive clad pipe; bonding strength; partial contact defect; Rayleigh-Ritz method;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kaya, Y. and Kahraman, N. (2013), "An investigation into the explosive welding/cladding of Grade A ship steel/AISI 316L austenitic stainless steel", Mater. Des., 52(24), 367-372.   DOI
2 Li, J. and Hua, H. (2007), "Spectral finite element analysis of elastically connected double-beam systems", Finite Elem. Anal. Des., 43(15), 1155-1168.   DOI
3 Mao, Q. (2012), "Free vibration analysis of elastically connected multiple-beams by using the Adomian modified decomposition method", J. Sound Vib., 331(11), 2532-2542.   DOI
4 Mendes, R., Ribeiro, J.B. and Loureiro, A. (2013), "Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration", Mater. Des., 51(51), 182-192.   DOI
5 Mouritz, A.P., Townsend, C. and Shah-Khan, M.Z. (2000), "Nondestructive detection of fatigue damage in thick composites by pulse-echo ultrasonics", Compos. Sci. Technol., 60(1), 23-32.   DOI
6 Oniszczuk, Z. (2000), "Free transverse vibrations of elastically connected simply supported double-beam system", J. Sound Vib., 232(2), 387-403.   DOI
7 Oniszczuk, Z. (2003), "Forced transverse vibrations of an elastically connected complex simply supported double-beam system", J. Sound Vib., 264(2), 273-286.   DOI
8 Pellicano, F. (2007), "Vibration of circular cylindrical shells: Theory and experiments", J. Sound Vib., 303(1-2), 154-170.   DOI
9 Shen, H., Wen, J., Yu, D. and Wen, X. (2009), "The vibrational properties of a periodic composite pipe in 3D space", J. Sound Vib., 328(1-2), 57-70.   DOI
10 Si, Y., Zhang, Z., Cheng, W. and Yuan, F. (2015), "State Detection of explosive welding structure by dual-tree complex wavelet transform based permutation entropy", Steel Compos. Struct., Int. J., 19(3), 569-583.   DOI
11 Si, Y., Zhang, Z., Wang, H. and Yuan, F. (2017), "Feasibility study of bonding state detection of explosive composite structure based on nonlinear output frequency response functions", Steel Compos. Struct., Int. J., 24(4), 391-397.
12 Sun, X.J., Tao, J. and Guo, X.Z. (2011), "Bonding properties of interface in Fe/Al clad tube prepared by explosive welding", T. Nonferr. Metal. Soc., 21(10), 2175-2180.   DOI
13 Vu, H.V., Ordonez, A.M. and Karnopp, B.H. (2000), "Vibration of a double-beam system", J. Sound Vib., 229(4), 807-822.   DOI
14 Xia, H., Wang, S. and Ben, H. (2014), "Microstructure and mechanical properties of Ti/Al explosive cladding", Mater. Des., 56(4), 1014-1019.   DOI
15 Emam, S.A. (2018), "Snapthrough and free vibration of bistable composite laminates using a simplified Rayleigh-Ritz model", Compos. Struct., 206, 403-414.   DOI
16 Acarer, M. and Demir, B. (2008), "An investigation of mechanical and metallurgical properties of explosive welded aluminumdual phase steel", Mater. Lett., 62(25), 4158-4160.   DOI
17 Arani, A.G. and Amir, S. (2014), "Flow-induced vibration of double visco-CNTs under magnetic fields considering surface effect", Comp. Mater. Sci., 86(86), 144-154.   DOI
18 Bashmal, S., Bhat, R. and Rakheja, S. (2009), "In-plane free vibration of circular annular disks", J. Sound Vib., 322(1), 216-226.   DOI
19 Chen, S., Daehn, G.S., Vivek, A., Liu, B., Hansen, S.R., Huang, J.H. and Lin, S.B. (2016), "Interfacial microstructures and mechanical property of vaporizing foil actuator welding of aluminum alloy to steel", Mat. Sci. Eng. A, 659, 12-21.   DOI
20 El-Gebeily, M. and Khulief, Y.A. (2016), "Identification of wallthinning and cracks in pipes utilizing vibration modes and wavelets", Appl. Math. Model, 40(9-10), 5335-5348.   DOI
21 Findik, F. (2011), "Recent developments in explosive welding", Mater. Des., 32(3), 1081-1093.   DOI
22 Gao, Y., Muggleton, J.M., Liu, Y. and Rustighi, E. (2017), "An analytical model of ground surface vibration due to axisymmetric wave motion in buried fluid-filled pipes", J. Sound Vib., 395, 346-366.
23 Guo, X., Tao, J., Yuan, Z., Zhang, L. and Sun, X. (2012), "Interface and properties of explosive welded TA1/Al clad tube", Rare Metal Mat. Eng., 41(1), 139-142.   DOI
24 Guo, X., Fan, M., Wang, L. and Ma, F. (2016a), "Bonding interface and bending deformation of al/316lss clad metal prepared by explosive welding", J. Mater. Eng. Perform., 25(6), 2157-2163.   DOI
25 Guo, X., Wang, H., Liu, Z. Wang, L. Ma, F. and Tao, J. (2016b), "Interface and performance of CLAM steel/aluminum clad tube prepared by explosive bonding method", Int. J. Adv. Manuf. Tech., 82(1-4), 543-548.   DOI
26 Jeong, S. and Yoo, H.H. (2019), "Nonlinear structural analysis of a flexible multibody system using the classical Rayleigh-Ritz method", Int. J. Nonlin. Mech., 110, 69-80.   DOI
27 Karlicic, D., Cajic, M., Murmu, T. and Adhikari, S. (2015), "Nonlocal longitudinal vibration of viscoelastic coupled doublenanorod systems", Eur. J. Mech. A-Solid, 49, 183-196.   DOI