• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.10
• /
• pp.427-437
• /
• 1986

Identification of the plants is not easy task especially in the fields of process control. From this point of view, Kitamori developed a method of control system design based on partial knowledge about controlled processes. However, it is difficult to control the oscillatory plant by kitamori's method. In this paper, we develope a method of partial model matching control system design, which have desirable pole-placements in order to improve the above defects. Design examples are given to illustrate the effectiveness of the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1398-1403
• /
• 2003

In this paper, a simple method to design an MIMO sound field control system was proposed. The control system was designed to achieve 1) noise attenuation and 2) sound equalization by utilizing feedback and feedforward controllers. The method was based on partial model matching on frequency domain which only required measured frequency response data, or impulse response data in order to tune parameters of the controller. The proposed method was applied to a normal office room and results of experiment showed effectiveness of the proposed method.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.669-672
• /
• 2009

The techniques extract shape descriptors from 3D models and use these descriptors for indices for comparing shape similarities. Most similarity search techniques focus on comparisons of each individual 3D model from databases. However, our similarity search technique can compare not only each individual 3D model, but also partial shape similarities. The partial shape matching technique extends the user's query request by finding similar parts of 3D models and finding 3D models which contain similar parts. We have implemented an experimental partial shape-matching search system for 3D pagoda models, and preliminary experiments show that the system successfully retrieves similar 3D model parts efficiently.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.225-233
• /
• 2001

This paper deals with the transfer alignment problem of SDINS(StrapDown Inertial Navigation System) subjected to roll and pitch motions of the ship. Specifically, to reduce alignment errors induced by measurement time-delay and ship body flexure, an error compensation method is suggested based on delay state augmentation and DCM(Direction Cosine Matrix) partial matching. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then DCM partial matching is properly combined to reduce effects of a ship's Y axis flexure. The simulation results show that the suggested method is effective enough resulting in considerably less azimuth alignment errors.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.79-87
• /
• 1996

A new method for recognizing and locating partially occluded or overlapped two-dimensional objects regardless of their size, translation, and rotation, is presented. Dominant points approximating occuluding contoures of objects are generated by finding local maxima of smoothed k-cosine function, and then used to guide the contour segment matching procedure. Primitives between the dominant points are produced by projecting the local contours onto the line between the dominant points. Robust classification of primitives. Which is crucial for reliable partial shape matching, is performed using adaptive resonance theory (ART2). The matched primitives having similar scale factors and rotation angles are detected in the hough space to identify the presence of the given model in the object scene. Finally the translation vector is estimated by minimizing the mean squred error of the matched contur segment pairs. This model-based matching algorithm may be used in diveerse factory automation applications since models can be added or changed simply by training ART2 adaptively without modifying the matching algorithm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1048-1057
• /
• 2008

This paper represents a design method for PID or low-order controllers cascaded with a linear plant in the unit feedback system where it is required to meet the given time response specifications such as overshoot and settling time. This problem is difficult to solve because the zeros of the controller appear in the numerator of the overall system and thus those zeros may make the time response design difficult. In this paper, we propose a new approach based on the partial model matching and the so called K-polynomial. The partial matching problem is formulated to an optimization problem in which a quadratic function of coefficient errors between a target model and the resulting closed loop system is minimized. For the sake of satisfying the closed loop stability, a set of quadratic constraints associated with the cost function is introduced. As a result, the controller designed meets both time response requirements and the closed loop stability, if any. It is shown through several examples that the present method can be easily applied to these problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.165-168
• /
• 1996

In this paper, we propose a design method of PID adaptive controller based on frequency domain analysis. The method is based on the estimation of a nonparametric process model in the frequency domain and the determination of the PID controller parameters by achieving partial model matching so as to minimize a performance function concerning to relative model error between the loop transfer function of the control system and the desired system. In the design method the process is represented only by a discrete set of points on the Nyquist curve of the process. Therefore it is not necessary to estimate a full order parameterized process model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.786-791
• /
• 2005

This paper is concerned with the examination and evaluation concerning a tuning method of multivariable PID controllers based on partial model matching on frequency domain proposed by authors from practical view point. In this case, PID controller parameters are determined by minimizing the loss function defined by the difference between frequency response of ideal model transfer function and actual frequency response on several frequency points. The purpose of the paper is to examine and evaluate the performance of the method through actual experiments of MIMO liquid level experimental process control equipment.

• The KIPS Transactions:PartB
• /
• v.8B no.1
• /
• pp.1-9
• /
• 2001

본 논문에서는 서식 문서를 짧은 처리 시간에 정확히 분류함으로써 실제 환경에서 응용할 수 있는 서식 분류 방법을 제안한다. 제안하는 방법은 서식 문서 이미지 전체를 다루기보다는 처리하고자 하는 서식 문서에서 서식 구조가 많이 다른 곳을 찾아서 매칭 영역으로 결정하고, 그 영역들에 대해서만 비교를 수행함으로써 계산 시간을 줄이고 인식률을 높인다. 선분 추출 시 오류를 고려하기 위하여 기존 인쇄 문자와 채워진 데이터, 그리고 매칭 영역의 크기 정보를 페널티 함수로 반영하여 매칭 영역 선택 시 고려한다. 본 방법은 구조적으로 많이 다르고, 양질의 특징을 포함하는 적은 수의 매칭 영역을 선택함으로써 처리 시간을 줄일 수 있음은 물론 높은 서식 분류율을 얻을 수 있다.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.211-221
• /
• 1998

It is becoming apparent that stereo matching algorithms need much information from high level cognitive processes. Otherwise, conventional algorithms based on bottom-up control alone are susceptible to local minima. We introduce a system that consists of two levels. A lower level, using a usual matching method, is based upon the local neighborhood and a second level, that can integrate the partial information, is aimed at contextual matching. Conceptually, the introduction of bottom-up and top-down feedback loop to the usual matching algorithm improves the overall performance. For this purpose, we model the image attributes using a Markov random field (MRF) and thereupon derive a maximum a posteriori (MAP) estimate. The energy equation, corresponding to the estimate, efficiently represents the natural constraints such as occlusion and the partial informations from the other levels. In addition to recognition, we derive a training method that can determine the system informations from the other levels. In addition to recognition, we derive a training method that can determine the system parameters automatically. As an experiment, we test the algorithms using random dot stereograms (RDS) as well as natural scenes. It is proven that the overall recognition error is drastically reduced by the introduction of contextual matching.