• Title/Summary/Keyword: Partial Field

Search Result 932, Processing Time 0.028 seconds

Chromosomal Aberration in Fractionated Radiotherapy (전골반 방사선 분할 조사시 방사선량에 따른 염색체이상 빈도의 변화 양상)

  • Yun, Hyong-Geun;Ha, Sung-Sung
    • Radiation Oncology Journal
    • /
    • v.16 no.2
    • /
    • pp.115-123
    • /
    • 1998
  • Purpose : This study was tried to evaluate the effect of the partial body fractionated irradiation on the frequency of chromosomal aberration. Materials and Methods : In three patients with uterine cervix carcinoma, chromosomal aberrations were analyzed during fractionated external beam radiotherapy Radiation field included whole pelvis and total dose was 5040 cGy in 28 fractions. Results : The values of the frequency of dicentrics and rings (Ydr) in pre-irradiated peripheral lymphocytes in three patients were 0.0060, 0.0000, and 0.0029, respectively. The frequency of dicentrics and rings, estimated during the course of radiotherapy, increased with radiation dose and best fitted to the linear equation, $Ydr=7.31{\times}10^{-5}D(cGy)+1.45{\times}10^{-2}$. The frequency of dicentrics and rings among the cells with dicentric and/or ring(Qdr) also showed increasing tendency and best fitted to the linear equation, $Qdr=1.01{\times}10^{-4}D(cGy)+1.04$. Conclusion : Ydr increased linearly with radiation dose in the dose range of our study, and Qdr showed increasing tendency with dose.

  • PDF

Isolation and Charcterization of Micrococcus sp. HJ-19 Secreting Extracellular Protease (단백질 분해효소를 분비하는 Micrococcus sp. HJ19의 분리 및 특성)

  • Cha, In-Tae;Oh, Yong-Sik;Roh, Dong-Hyun
    • Korean Journal of Microbiology
    • /
    • v.43 no.3
    • /
    • pp.222-226
    • /
    • 2007
  • Proteases are degradative enzymes which hydrolyze a peptide bond between amino acids and they are abundantly applied to commercial field. In order to screen new source of pretense, bacteria secreting extracellular pretense were isolated by enrichment culture from deep sea water samples of East Sea, Korea. A bacterium, named as HJ19, showed the best growth and the largest clear zone in plates supplemented skim milk at $30^{\circ}C$. The partial DNA sequence analysis of the 16S rRNA gene, phenotypic tests and morphology identified that this strain was In genus Micrococcus. The strain HJ19 could not grow at $10^{\circ}C$ but it started growth and showed pretense activity at $20^{\circ}C$. The optimal growth was at $37^{\circ}C$ and the maximal protease activity at $30^{\circ}C$ was about 480unit/ml.

Prediction of Chemical Composition in Distillers Dried Grain with Solubles and Corn Using Real-Time Near-Infrared Reflectance Spectroscopy

  • Choi, Sung Won;Park, Chang Hee;Lee, Chang Sug;Kim, Dong Hee;Park, Sung Kwon;Kim, Beob Gyun;Moon, Sang Ho
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.33 no.3
    • /
    • pp.177-184
    • /
    • 2013
  • This work was conducted to assess the use of Near-infrared reflectance spectroscopy (NIRS) as a technique to analyze nutritional constituents of Distillers dried grain with solubles (DDGS) and corn quickly and accurately, and to apply an NIRS-based indium gallium arsenide array detector, rather than a NIRS-based scanning system, to collect spectra and induce and analyze calibration equations using equipment which is better suited to field application. As a technique to induce calibration equations, Partial Least Squares (PLS) was used, and for better accuracy, various mathematical transformations were applied. A multivariate outlier detection method was applied to induce calibration equations, and, as a result, the way of structuring a calibration set significantly affected prediction accuracy. The prediction of nutritional constituents of distillers dried grains with solubles resulted in the following: moisture ($R^2$=0.80), crude protein ($R^2$=0.71), crude fat ($R^2$=0.80), crude fiber ($R^2$=0.32), and crude ash ($R^2$=0.72). All constituents except crude fiber showed good results. The prediction of nutritional constituents of corn resulted in the following: moisture ($R^2$=0.79), crude protein ($R^2$=0.61), crude fat ($R^2$=0.79), crude fiber ($R^2$=0.63), and crude ash ($R^2$=0.75). Therefore, all constituents except for crude fat and crude fiber were predicted for their chemical composition of DDGS and corn through Near-infrared reflectance spectroscopy.

Histopathologic Findings in Tissues of Rodents after Inoculation with Hantaan Virus (한탄 바이러스를 접종한 설치류의 병리조직학적 소견)

  • Ahn, In-Suk;Lee, Ho-Wang;Lee, Yong-Ju;Seong, In-Wha;Baek, Luck-Ju;Choi, Jong-Sang
    • The Journal of the Korean Society for Microbiology
    • /
    • v.19 no.1
    • /
    • pp.1-10
    • /
    • 1984
  • The occurrence of Hemorrhagic fever with renal syndrome was noted for the first time among the United Nations troops in Korea in 1951. In 1976, Lee and Lee demonstrated for the first time an antigen in the lungs of a striped field mouse, Apodemus agrarius, which gave specific immunofluorescent reactions with sera from patients convalescent from Korean hemorrhagic feve (KHF). The natural reservoir host of KHF is Apodemus agrarius coreae mice in rural endemic areas in Korea. Clinical manifestations of acute illness do not occur in infected Apodemus agrarius. Infected rodents excrete large amounts of virus in saliva, in urine and in feces for a long period of time. In this study, the tissues of Apodemus agrarius, Wistar rat and Balb/C mouse were inoculated with Hantaan virus and subsequently observed for any histopathologic findings. 1. In lungs, infiltration of lymphocytes in alveolar septa and peribronchial region and thickening of and giant cell formation in alveolar septa were observed. 2. In kidney, vascular congestion, interstitial hemorrhage in corticomedullary junction and partial microscopic hemorrhage in urinary space were found. 3. In spleens, vascular congestion, old and recent hemorrhage and multinucleated giant cell formation were seen.

  • PDF

Control of Working Temperature of Isothermal Magnetic Entropy Change in La0.8Nd0.2(Fe0.88Si0.12)13 by Hydrogen Absorption for Magnetic Refrigerants

  • Fujieda, S.;Fujita, A.;Fukamichi, K.;Suzuki, S.
    • Journal of Magnetics
    • /
    • v.18 no.2
    • /
    • pp.150-154
    • /
    • 2013
  • $La_{1-z}Nd_z(Fe_{0.88}Si_{0.12})_{13}$ and their hydrides were investigated to obtain large magnetocaloric effects (MCEs) in a wide temperature range, including room temperature, for applications in magnetic refrigents. Since the magnetization change due to the itinerant-electron metamagentic (IEM) transition for $La_{1-z}Nd_z(Fe_{0.88}Si_{0.12})_{13}$ becomes larger with increasing z, the isothermal magnetic entropy change ${\Delta}S_m$ and the relative cooling power (RCP) are enhanced. In addition, the Curie temperatrue $T_C$ of $La_{0.8}Nd_{0.2}(Fe_{0.88}Si_{0.12})_{13}$ is increased from 193 to 319 K by hydrogen absorption, with the IEM transition. The maximum value of $-{\Delta}S_m$, $-{\Delta}S{_m}^{max}$, in a magnetic field change of 2 T for $La_{0.8}Nd_{0.2}(Fe_{0.88}Si_{0.12})_{13}H_{1.1}$ is about 23 J/kg K at $T_C$ = 288 K, which is larger than that of 19 J/kg K at $T_C$ = 276 K for $La(Fe_{0.88}Si_{0.12})_{13}H_{1.0}$. The value of RCP = 179 J/kg of the former is also larger than 160 J/kg of the latter. It is concluded that the partial substitution of Nd improves MCEs in a wide temperautre range, including room temperature.

The Effect of Representative Dataset Selection on Prediction of Chemical Composition for Corn kernel by Near-Infrared Reflectance Spectroscopy (예측알고리즘 적용을 위한 데이터세트 구성이 근적외선 분광광도계를 이용한 옥수수 품질평가에 미치는 영향)

  • Choi, Sung-Won;Lee, Chang-Sug;Park, Chang-Hee;Kim, Dong-Hee;Park, Sung-Kwon;Kim, Beob-Gyun;Moon, Sang-Ho
    • Journal of Animal Environmental Science
    • /
    • v.20 no.3
    • /
    • pp.117-124
    • /
    • 2014
  • The objectives were to assess the use of near-infrared reflectance spectroscopy (NIRS) as a tool for estimating nutrient compositions of corn kernel, and to apply an NIRS-based indium gallium arsenide array detector to the system for collecting spectra and analyzing calibration equations using equipments designed for field application. Partial Least Squares Regression (PLSR) was employed to develop calibration equations based on representative data sets. The kennard-stone algorithm was applied to induce a calibration set and a validation set. As a result, the method for structuring a calibration set significantly affected prediction accuracy. The prediction of chemical composition of corn kernel resulted in the following (kennard-stone algorithm: relative) moisture ($R^2=0.82$, RMSEP=0.183), crude protein ($R^2=0.80$, RMSEP=0.142), crude fat ($R^2=0.84$, RMSEP=0.098), crude fiber ($R^2=0.74$, RMSEP=0.098), and crude ash ($R^2=0.81$, RMSEP=0.048). Result of this experiment showed the potential of NIRS to predict the chemical composition of corn kernel.

Indium Tin Oxide (ITO) Nano Thin Films Deposited by a Modulated Pulse Sputtering at Room Temperature (모듈레이티드 펄스 스퍼터링으로 상온 증착한 Indium-Tin-Oxide (ITO) 나노 박막)

  • You, Younggoon;Jeong, Jinyong;Joo, Junghoon
    • Journal of the Korean institute of surface engineering
    • /
    • v.47 no.3
    • /
    • pp.109-115
    • /
    • 2014
  • High power impulse magnetron sputtering (HIPIMS), also known as the technology is called peak power density in a short period, you can get high, so high ionization sputtering rate can make. Higher ionization of sputtered species to a variety of coating materials conventional in the field of improving the characteristics and self-assisted ion thin film deposition process, which contributes to a superior being. HIPIMS at the same power, but the deposition speed is slow in comparison with DC disadvantages. Since recently as a replacement for HIPIMS modulated pulse power (MPP) has been developed. This ionization rate of the sputtered species can increase the deposition rate is lowered and at the same time to overcome the problems to be reported. The differences between the MPP and the HIPIMS is a simple single pulse with a HIPIMS whereas, MPP is 3 ms in pulse length is adjustable, with the full set of multi-pulses within the pulse period and the pulse is applied can be micro advantages. In this experiment, $In_2O_3$ : $SnO_2$ composition ratio of 9 : 1 wt% target was used, Ar : $O_2$ flow rate ratio is 4.8 to 13.0% of the rate of deposition was carried out at room temperature. Ar 40 sccm and the flow rate of $O_2$ and then fixed 2 ~ 6 sccm was compared against that. The thickness of the thin film deposition is fixed at 60 nm, when the partial pressure of oxygen at 9.1%, the specific resistance value of $4.565{\times}10^{-4}{\Omega}cm$, transmittance 86.6%, mobility $32.29cm^2/Vs$ to obtain the value.

Development of the Digital Map Updating System using CAD Object Extracted from As-Built Drawings (준공도면에서 추출된 CAD 객체를 이용한 수치지형도의 갱신 시스템 개발)

  • Yang, Sung-Chul;Choi, Jae-Wan;Yu, Ki-Yun
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.17 no.3
    • /
    • pp.13-21
    • /
    • 2009
  • Digital map should have the up-to-dateness as well as the accuracy to perform a role as the national spatial data. As digital mapping process require aerial photograph, surveying, and field working, it consumes a lot of time and cost. So there is a limit to maintain the up-to-dateness. If we updates the digital map frequently by using the as-built drawings, we can prevent the waste of national budget by reuse of existing drawings and make accuracy updates from existing survey results. In spite of this advantages, due to insufficiency of CAD drawing standard, inconsistency of file types of as-built drawings and digital maps, and topology relations between input features and original features, so the frequent updates using the as-built drawings is on the difficult situation to perform. In this research, first, CAD features extracted from as-built drawings land the new/update whether original features exist or not and generate topology from spatial relation of features. Second, suggest the efficient partial-update-plan performing integrity test. As a result, guarantee the accuracy and the up-to-dateness of digital map.

  • PDF

The Development of a Life Planning Program for Retired Elderly People (은퇴자의 생활설계를 위한 교육 프로그램의 개발)

  • Choi Bo A;Chi Young Sook
    • Journal of Families and Better Life
    • /
    • v.22 no.6 s.72
    • /
    • pp.47-61
    • /
    • 2004
  • The purpose of this study is to develop a life planning program for retired elderly people. This program is not a preparation program for elderly people prior to their retirement but a readjustment and re-planning their life after retirement. This program help retired elderly people to solve the life problem and set up a affirmative ones future image. Also this program pay regard to social, home backgrounds of this generation. The program consists of four session curriculums session 1 is entitled to &Make my future by oneself&, session 2 is &Enjoy healthy life as much as one can&, session 3 is &Have a heart for family& and session 4 is &Set up a mature old age&. A fled study has been conducted with ten retired elderly people who want to participated in the program voluntarily. 4 sessions each of which consists of 2 hours were performed at Korean Association of Retired Persons. Field test for program evaluation is designed to three steps: pre-test, post-test and one month follow-up test to measure the effectiveness of the program. According to evaluation results, the program shows a significantly positive effect on the improvement of elderly people's understanding about elderly life. At the one month follow-up assessment, the effect of program is still remained strongly even though there is a Partial slight increase or reduction which is not statistically significant. Most of the program participants have expressed high level of satisfaction with the program. For further study, we need various contents which are suited to larger group with diverse socio0-demographic backgrounds. At the same time, the program has diverse instruction methods which are pertinent to levels of participants. Also, the program needs to continuous adjustment to the next generation with their social, home backgrounds.

Fabrication of Thick SmBCO/IBAD-MgO coated conductor (후막 SmBCO/IBAD-MgO 초전도 박막선재의 제조)

  • Lee, J.H.;Kang, D.K.;Ha, H.S.;Ko, R.K.;Oh, S.S.;Kim, H.K.;Yang, J.S.;Jung, S.W.;Moon, S.H.;Youm, D.;Kim, C.J.
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.05a
    • /
    • pp.9-9
    • /
    • 2009
  • Coated conductor is required to have good critical current property for high efficiency of electric power applications. Until now, long coated conductor does not show high Jc over 3 MA/$cm^2$ in thick superconducting layer because of texture degradation by thick superconducting layer. In this study, in order to overcome this issue, thicker superconducting layer was deposited with optimized conditions to reduce the degradation of critical current density. SmBCO superconducting coated conductor was deposited with 1~3 um of thickness at $750\sim850^{\circ}C$ under 15~20 mTorr of oxygen partial pressure using batch type EDDC( evaporation using drum in dual chamber). The buffered substrate for superconducting layer deposition was used IBAD-MgO template with the architecture of $LaMnO_3/MgO/Y_2O_3/Al_2O_3$/Hastelloy. After fabrication of coated conductor, critical current was measured by 4-prove method under self-magnetic field and 77K. In addition, surface morphology and texture were analyzed by SEM and XRD, respectively. 3 um thick SmBCO coated conductor shows highest $I_C$ values of 638A/cm-w in 1 m long in the world.

  • PDF