• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.116-124
• /
• 2012

In this paper, we propose an efficient lighting control system design for AVR based LSDM control. This paper, an efficient lighting control system design for LSDM control be design divided as the signal control part for I/O data bus and the timer/counter part for clock signal control according to operating conditions. LSDM control logic be optimization to PORTx and DDRx register by specifying the logical value of each bit for effective control signal processing. And, the LSDM control signal by lighting control program execution of ATmega128 be designed to be LSDM lighting control by control logic operating. In this paper, a proposed lighting control system were measured to power loss rate to proved the power loss reduction about lighting status of LSDM control logic by download the lighting control program to system through serial from host PC. As a measurement result, a proposed lighting control system than the existing lighting control system were proved to be effective to the overall power consumption reduction.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.799-806
• /
• 2004

A growing diversity of pervasive devices is gaming access to the Internet and other information. However, much of the rich multimedia contents cannot be easily handled by the client devices because of the limited communication, processing, storage and display capabilities. The in-tegration of voice, data and video service modified the target of networking technologies. Networks must have some the capabilities for in-tegration of various services and also for QoS support as required by each of those service. Because of these reasons, we developed EAGIS(Efficient ATM Gateway for real time Internet Service) to provide seamless multimedia service between the ATM network and the Internet. EAGIS consists of the interworking unit, content server, transcoding server, and the serveice broker to provide seamless multimedia service be-tween the ATM network and the Internet. In this paper, we design the architecture and transcoding service scenario of the EAGIS. When the RTP is used for the bi-directional communication, transcoding time is configured by the time-stamp of RTCP. When HTTP is used for unidirec-tional communication, self-timer is used. By using these reference time, standard transcoding method is applicable according to the frame trans-mission rate and network traffic load. And we can also assure the QoS of the multiple users` effective bandwidth by our algorithm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.2
• /
• pp.125-131
• /
• 2001

When the program voltage is applied to a word line, a part of the boosted channel charge in inhibited bit lines is lost due to the coupling between the string select line (SSL) and the adjacent word line. This phenomenon causes the program disturbance in the cells connected to the inhibited bit lines. This program disturbance becomes more serious, as the word line pitch is decreased. To reduce the word line coupling, the rising edge of the word-line voltage waveform was changed from a pulse step into a ramp waveform with a controlled slope. The word-line ramping circuit was composed of a timer, a decoder, a 8 b D/A converter, a comparator, and a high voltage switch pump (HVSP). The ramping voltage was generated by using a stepping waveform. The rising time and the stepping number of the word-line voltage for programming were set to $\mutextrm{m}-$ and 8, respectively,. The ramping circuit was used in a 512Mb NAND flash memory fabricated with a $0.15-\mutextrm{m}$ CMOS technology, reducing the SSL coupling voltage from 1.4V into a value below 0.4V.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.427-438
• /
• 2001

Recently, Environmental Control Devices of Green House for Protected Cultivation is composed of on/off-type Controller to control each device using timer in equipment of intensive Labor. In case of system, it is difficult to grasp condition of the greenhouse about errors when this system has defect of a hardware, and it operates in the remote place or at night. In this paper, we developed a system that capable of replacing the existing control method of on/off with display panel in the greenhouse, monitoring data aquisition and status in the greenhouse using client computer based on internet. Also this system can communicate with each local greenhouse, and send alarm message about error. And we constructed web server to manage efficient informations for environmental control and corps cultivation in the greenhouse.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.334-360
• /
• 2007

This paper presents an emerging concept, professional mobility in S&T innovation system, that focus on the utilization of highly qualified researchers without recruiting. In this paper we divided the utilization of external researcher into four types: (1)visiting/post-Doc/guest researcher, (2)collaborating research student, (3)part-timer or trainee and (4)foreign researcher. From 2002 to 2005 in 19 Korean government-funded research institutes, while total researchers have increased by 13.3%, external researchers have decreased from 39.2% to 35.7%. In 2005, visiting and foreign researchers were only 6.5% of total external researchers. It may indicate that the innovation capability of Korean research institutes is on the quite limited situation compared to foreign research institutes. The financial and institutional support programs for promoting the professional mobility are also insufficient in Korean S&T innovation system.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.615-620
• /
• 2009

Nowadays, wireless infrastructures such as sensor networks are widely used in many different areas. In case of sensor networks, the wirelessly connected sensors can execute different kind of tasks in a diversity of environments, and one of the most important parameter for a successful execution of such tasks is the location information of each node. As to localization problems in WSNs, there are ToA (Timer of Arrival), RSS (Received Signal Strength), AoA (Angle of Arrival), etc. In this paper, we propose a modification of existing ToA and RSS based methods, adding a weighted average scheme to measure more precisely the distance between nodes. The comparison experiments with the traditional ToA method show that the average error value of proposed method is reduced by 0.1 cm in indoor environment ($5m{\times}7m$) and 0.6cm in outdoor environment ($10{\times}10m$).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.691-700
• /
• 1994

A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.709-718
• /
• 2005

To correspond with the unpredictable future tactical environment, Ive expanded the application of M&S(Modeling & Simulation) that is more scientific and more economic in a field of weapon system development process. This paper describes experience in development of ADSF(Air Defense Simulation Framework) that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP as well as real-time distributed simulation. ADSF has been applied to the M-SAM(Medium Range Surface to Air Missile) System Simulator, and satisfying test results through GPS(Global Positioning System) timer has been acquired. As a result, an ADSF which is able to support HLA and TCP/IP as veil as precise real-time simulation has been successfully made. we were in need or a real-time simulation engine to support Air Defense System Simulators that were consisted of several subsystems.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.19-26
• /
• 2013

In this paper, we present a novel illumination system for parking lots constructed underground. We design and implement this system using microwave sensors and dimming control of LED fluorescent lamps so that we can obtain lighting efficiency of the illumination scheme. We construct an effective illumination system in the aspects of performance and cost, resulting in energy-saving and electricity reduction. Recently conventional energy-saving method applied to old underground parking lots mainly relies upon turning off the half of total number of lamps installed in the parking lot. Sometimes there are some lots that have infrared sensor to be used to turn on/off the fluorescent lamps to realize these operations smoothing. The other schemes utilize timer to control lighting time of the fluorescent lamps. These conventional schemes are forcing to turn off a part of lamps installed so that we cannot apply them in a systematic way. Moreover they will be most inefficient when we leave them alone to be continuous consumers. The lighting control system proposed in this paper can recognize objects through microwave sensors and inform the appropriate lighting time, furthermore we can adjust brightness of LED lamps following the surroundings using dimming control scheme so that we can epochally improve the illumination system for underground parking lots. According to our sophisticated test experiments, we can maximally obtain 81.9% of energy-saving effectiveness using the system proposed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.25-31
• /
• 2020

In this study, for the safe use of a portable ultrasonic skin-beauty device, an android app was developed to show the irradiation locations of focused ultrasound to a user through augmented reality (AR) and enable stable self-surgery. The utility of the app was assessed through testing. While the user is making a facial treatment with the beauty device, the user's face and the ultrasonic irradiation location on the face are detected in real-time with a smart-phone camera. The irradiation location is then indicated on the face image and shown to the user so that excessive ultrasound is not irradiated to the same area during treatment. To this end, ML-Kit is used to detect the user's face landmarks in real-time, and they are compared with a reference face model to estimate the pose of the face, such as rotation and movement. After mounting a LED on the ultrasonic irradiation part of the device and operating the LED during irradiation, the LED light was searched to find the position of the ultrasonic irradiation on the smart-phone screen, and the irradiation position was registered and displayed on the face image based on the estimated face pose. Each task performed in the app was implemented through the thread and the timer, and all tasks were executed within 75 ms. The test results showed that the time taken to register and display 120 ultrasound irradiation positions was less than 25ms, and the display accuracy was within 20mm when the face did not rotate significantly.