• 영어어문교육
• /
• 제17권1호
• /
• pp.1-16
• /
• 2011

Listening has been a neglected research area despite the crucial role it plays. The present investigation was aimed at examining how the provision of topical knowledge and learners' listening proficiency level affect learners' listening performance under four different preparatory activity conditions: topical knowledge, vocabulary list, language structure, and no activity. A total of 134 participants, assigned to the four different activity groups, took part in the study. The results revealed that the learners who were provided with topical knowledge before listening performed significantly better than the other learners, followed by the vocabulary list group and language structure group, which might be attributed to the activation of their content schemata. The learners who did not perform any preparatory activities achieved the lowest scores. When it comes to the impact of listening proficiency, it was revealed that learners' proficiency level had a significant influence on learners' listening performance, and there was a significant interaction between the learners' level of listening proficiency and preparatory activity. Providing relevant knowledge was effective for both higher level and lower level learners, whereas teaching vocabulary before listening was effective for higher level learners but was not for lower level ones. Based on the results, some pedagogical implications and suggestions for future research were discussed.

• 정보처리학회논문지D
• /
• 제18D권6호
• /
• pp.415-422
• /
• 2011

텍스트 데이터는 표현 방식의 차이, 타이핑 오류 등을 포함하고 있어 정확히 일치하는 검색으로는 유용한 정보를 얻기 어렵다. 따라서 유사도 기반 검색 방법이 많이 연구되고 있으며 효율적인 유사도 기반 검색을 위해 텍스트 데이터에 대한 역 리스트를 구성한다. 그리고 이를 병합하여 질의와 일정 기준 이상 유사한 데이터를 찾는다. 본 논문에서는 Suffix 필터링 과정에서 역 리스트의 탐색 비용을 줄이기 위해 역 리스트의 통계 정보인 비트맵 필터를 사용하는 기법을 제안한다. 제안하는 기법은 비트맵 필터를 사용하여 Suffix 필터링 과정에서 역 리스트의 탐색 여부를 결정하여 불필요한 역 리스트 탐색을 회피함으로써 역 리스트 병합 비용을 줄인다. 실험을 통하여 제안된 기법이 기존의 연구에서 제안된 Suffix 필터링 알고리즘보다 더 효율적임을 보인다.

• 한국어교육
• /
• 제29권4호
• /
• pp.1-29
• /
• 2018

This study aims to develop the constructs for evaluating team presentations performed by undergraduate international students in Korea. To achieve the goal, this study reviews related research and sets the criteria to analyze the problems of team presentations performed in Korean by undergraduate international students. Through this analysis we got to know which problems they were making. They were failing to reorganize the resources they had referenced and to organize the contents into one. And errors or mistakes of grammar and spelling were found often in their PPT files, and the editing styles of the PPTs were not consistent. Moreover, their performances were not unlike their PPT files. One made a good presentation but the other students just recited the script without interaction with the audience. Moreover, they could not operate the Q&A part and lead the discussion well, and components for wrapping up the presentation also were omitted frequently. After the analysis, this study conducted a survey with 23 Korean language educators asking about the validity of the construct and description of the survey. Based on the collected feedback, the construct list has been modified primarily, and carried out a second survey with an expert group. Based on their opinion, the final construct list was fine-tuned.

• Journal of Computational Design and Engineering
• /
• 제2권1호
• /
• pp.55-66
• /
• 2015

To satisfy safety regulations of Economic Commission for Europe (ECE), the surface regions of automobile parts must have a sufficient degree of roundness if there is any chance that they could contact a sphere of 50.0 mm radius (exterior parts) or 82.5 mm radius (interior parts). In this paper, a new offset-based method is developed to automatically detect the possible sphere-contacting shape of such parts. A polyhedral model that precisely approximates the part shape is given as input, and the offset shape of the model is obtained as the Boolean union of the expanded shapes of all surface triangles. We adopt a triple-dexel representation of the 3D model to enable stable and precise Boolean union computations. To accelerate the dexel operations in these Boolean computations, a new parallel processing method with a pseudo-list structure and axis-aligned bounding box is developed. The possible sphere-contacting shape of the part surface is then extracted from the offset shape as a set of points or a set of polygons.

• 한국간호교육학회지
• /
• 제7권1호
• /
• pp.126-142
• /
• 2001

Although a call for the implementation of PBL in nursing education is getting increased, it has not been actively implemented as it could be. The main reason for this situation seems to be the lack of well designed learning packages. Well designed PBL packages can be the core factor for the successful implementation of PBL. However, this seems to be the hardest task for teachers wanting to implement PBL. Therefore, the purpose of this study is to develop a systematic framework of PBL package development process and provide the examples of its application. This framework of the process of PBL package development includes thirteen steps. First of all, the team needs to decide a topic to be explored in the package and then clusters concepts related to the topic. Second, the team selects a real situation and writes it as a story. Third, knowledge, skills, and attitudes that practitioners need to know to deal with the situation will be explored. Fourth, learning objectives will be written. The next, the team will check if the situation includes multidisciplinary concepts and content. Sixth, the story will be divided into several parts. Seventh, part 1 will be written. Eighth, clinical documents related to part 1 need to be prepared. Ninth, the team will write a suggested approach for students. Then, they need to prepare a tutor's guide for part 1. Eleventh, the team will prepare a list of reading materials and plan for lectures and clinical laboratory sessions. Twelfth, they will write part 2 ~ part N following the steps from the seventh to the eleventh. The last step is evaluating the package and amending it as needed. These thirteen steps are very detailed and easy to follow for beginners. It is expected that this framework will contribute to accelerate the implementation of PBL in nursing education.

• 소성∙가공
• /
• 제4권1호
• /
• pp.28-38
• /
• 1995

An integrated process planning system can determine desirable operation sequences even if they have little experience in the design of multistage cold forging process. This system is composed of seven major modules such as input module, pre-design module, formability check module, forming sequence design module, forming analysis module, FEM verification module, and output module which are used independently or in all. The forming sequence for the part can be determined by means of primitive geometries such as cylinder, cone, convex, and concave. By utilizing this geometrical characteristics(diameter, height, and radius), the part geometry is expressed by a list of the primitive geometries. Accordingly, the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the dimensional tolerances and the proper sequence of operations for parts, is generated under the environment of AutoCAD. Several forming sequences generated by the planning system can be checked by the forming analysis module. The acceptable forming sequences can be verified further, using FE simulation.

• 한국CDE학회논문집
• /
• 제16권3호
• /
• pp.187-196
• /
• 2011

Generally, BOM (Bill of Material) means a part list which is needed to manufacture or assemble a product or part. During manufacturing processes, BOM is inevitably required for most of enterprise processes such as design, procurement, production planning/control, resource planning, and financial works. Every manufacturing industry uses many kinds of BOM's that are adjusted to the requirement of functions of their work division. Moreover, BOM evolves in different forms according to the product development phases such as conceptual design; function design, detail design, and production design because it is necessary to use different product structures to keep product data generated throughout the lifecycle of a product. This includes all data and information related to the all the product development phases. Shipbuilding works also are processed and controlled based on BOM. However, effective maintenance of ship outfitting BOM data is getting difficult as the amount and complexity of data have increased due to variety and long lifecycle of ship. For the effective management of outfitting BOM data, two aspects must be considered. One is how to classify numerous BOMs type and the others how to display BOMs. So this study suggests a method to classify BOM types and propose two categories - Structure BOM, Display BOM. Base on this result, we propose the integrated ship outfitting BOMs model and analysis outfitting BOMs.

• 한국지능시스템학회논문지
• /
• 제16권4호
• /
• pp.449-453
• /
• 2006

본 논문은 시설물의 효율적인 유지보수 관리를 위해 이미지 도면의 부품정보를 효율적으로 활용할 수 있는 방안을 제시한다. 시설물 설계 도면에는 시설물을 구성하는 부품에 대한 정보가 표현되어 있고, 각 부품을 구분하기 위해 레전드 문자가 표기되어 있다. 본 논문은 이미지 도면의 레전드 문자 인식을 위해 인공지능 기법을 적용한다. 마지막으로, 본 논문에서 제안한 방법의 효율성을 평가하기 위해 인공지능기법을 도면관리시스템에 적용한다.

• 한국컴퓨터정보학회논문지
• /
• 제13권3호
• /
• pp.91-97
• /
• 2008

기존 CA(Certificate Authority)에서 인증서의 유효기간 및 클라이언트에서 폐지한 CRI (Certificate Revocation Information)를 관리하는데 있어서 많은 문제점이 있었다. 이를 해결하기 위한 여러 연구들이 행하여졌으나, 클라이언트 측면에서 인증서의 상태 정보를 실시간으로 검증할 수 있기에는 미흡하였다. 본 논문은 이러한 한계를 극복하기 위하여 분산 OCSP(On-line Certificate Status Protocol) 환경에서 새로운 CRI 운영 모델을 제안한다. CRL(Certificate Revocation Lists)을 분할하여 여러 OCSP 서버에게 최신의 CRL을 중복시키고, 그 외 CRL은 각 서버들에게 중복하여 분산시킨다. 이로써 기존의 CA의 병목현상을 줄이고, 전송되는 CRL의 크기도 효과적으로 줄임으로써 클라이언트가 인증서 상태를 실시간으로 검증할 수 있다.

• 대한산업공학회지
• /
• 제29권3호
• /
• pp.230-238
• /
• 2003

The configuration design of a mechanical product can be efficiently performed when it is based on the functional modeling. There are methodologies, which decompose function from the abstract level to the concrete level and match the functions to physical parts. But it is difficult to carry out an innovative design when the function is matched only to a pre-detined part. This paper describes the configuration design process of a mechanical product with a design expert system, which uses function taxonomy and TRIZ theory. The expert system can propose a functional modeling of a new part. which is not in the existing parts list. The abstraction levels of design knowledge are introduced, which describe the operation of mechanical product in the levels of abstraction. This is the theoretical background of using knowledge of function and TRIZ for configuration design. The expert system is adequate to control this design knowledge. which expresses knowledge of functional modeling, mapping rules between functions and parts, selection of parts, and TRIZ theory. The hierarchy of functions and machine parts are properly expressed by classes and objects in the expert system. A design expert system has been implemented for the configuration design of a train bogie, and a new brake system of the bogie is introduced with the aid of TRIZ's 30 function groups.