• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.106-121
• /
• 2008

In this paper, we proposed and designed the protocol for energy efficiency and the center of data aiming at the design of a Multi Location Awareness System that recognizes a shadow site in parking and tunnel, which stands on the basis of CSS(Chirp Spread Spectrum) method using ISM Band of IEEE 802.15.4a that aware close location with wireless RF only. As a result of the protocol measurement, it displays the observation errors of less than 15cm, the data error rate of less than 5%, and can implement the Multi Location Awareness System with maximum length of life for 13.5 days using battery of 3V(1500 mAh).

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.69-72
• /
• 2022

This paper actually investigates the load on major large-scale buildings in the downtown area, examines the economic feasibility of installing PV and ESS in a microgrid target building, and evaluates whether an electric vehicle capable of V2G through two buildings is effective as an economical analysis program (HOMER) was analyzed using. It is economical to install a mixture of ESS rather than using the whole PV, and it is shown that if there is an electric vehicle using the V2G function of EV, there is an economic effect to replace the PV. So that Incentives and policies are needed to replace a large area of PV and utilize the existing parking lot to lead EV as a resource of the microgrid. Currently, P2X technology that stores power as ESS or converts it to other energy to control when surplus renewable energy occurs in large-capacity solar power plants and wind farms, etc. This is being applied, and efforts are being made to maintain the stability of the system through the management of surplus power, such as replacing thermal energy through a heat pump. Due to the increase in electric vehicles, which were recognized only as a means of transportation, technologies for using electric vehicles are developing. Accordingly, existing gas stations do not only supply traditional chemical fuels, but electricity, and super stations that also produce electricity have appeared. Super Station is a new concept power plant that can produce and store electricity using solar power, ESS, V2G, and P2G. To take advantage of this, research on an urban microgrid that forms an independent system by tying a large building and several buildings together and supplies power through a super station around the microgrid is in full swing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.140-147
• /
• 2012

This study developed a flowerbed type infiltration system that could control the amount of runoff discharge under a certain level estimated its proper design infiltration rate, and analyzed the effects of its implementation. Analyzing the performance of infiltration system is the one of the essential processes that should be under review to predict its effects after implementation when a rainwater infiltration system is included in a district-based plan. To estimate the unit design infiltration rate of this system, the runoff decrease effect was analyzed by varying the unit infiltration rate of the system applied to the parking lot adjacent to the Korea Institute of Construction Technology laboratory building by using a water balance analysis program. After varying the unit design infiltration to $0.1{\sim}3m^3/m^2.day$ to analyze the variation in the rate of runoff, 80% of the runoff was infiltrated at $1.0m^3/m^2.day$, and the unit infiltration design rate at the time was 0.0416(m3/m2.hr). It was also found that the unit design infiltration rate obtained from a field infiltration test of the developed system was about $0.045m^3/hr$. Based on this study, it was possible that infiltration rate is estimated to consider the economic scale and environmental effect. It is significant to apply the spatial plan of rainwater infiltration system as green infrastructure.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.210-216
• /
• 2014

In this paper, it was proposed to develop front and rear image monitoring system for vehicle that help a driver to cope with urgent situation about a dangerous element. When parking a vehicle, the risk factors to be formed by the dead zone can be resolved by using anterior and posterior cameras of the vehicle. In embedded system environment, a SoC(System on Chip) and two high-resolution CMOS (Complementary metal-oxide-semiconductor) image sensors were used to transfer two high-resolution image data through he TCP/ IP-based network. To transfer image data through he TCP/ IP-based network, the images received by two cameras were compressed by using H.264 and they were transmitted with wireless method(Wi-Fi) by using real-time transport protocol (Real-time Transport Protocol). Transmission loss, transmission delay and transmission limit were solved in wireless (Wi-Fi) environment and the bit-rate of two image data compressed by H.264 was adjusted. And the system for the optimal transmission in wireless (Wi-Fi) environment was materialized and experimented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.309-316
• /
• 2020

This study analyzed Japan's three-dimensional road system as part of a study on urban regeneration plans through the three-dimensional use of road space. The three-dimensional road system integrates the Road Act, Urban Planning Act, and the Building Standard Act. The advantage of the three-dimensional road system is that landowners can freely use the space above and below the road so that they can live and operate sustainably, and road managers have the advantage of reducing the land acquisition costs because they only acquire rights to the road. In terms of type, it is applied to a variety of integrated and separated structures in elevated roads, underpasses, free passages, parking lots, and monorails. In addition, in the case of development methods, the degree of freedom of development plans is improved by enabling integrated maintenance of roads and buildings. Management stability is improved by applying management and law-based authority according to the Road Act. In this way, the three-dimensional road system provides support to maximize the use of limited available land through the three-dimensional use of road space, and to develop sustainable and good urban areas in development areas.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.1
• /
• pp.20-34
• /
• 1983

A phenomenon in the unplanned urban sprawl of Cheong-ju city has to be rest-rained from disposing and to develop, though progress in urbanization inevitably decreases rural area. So, this thesis aims at reviewing, revising and guiding toward the more effective land use planning practice and zoning mechanism and system of Cheong-ju city. I proposed that land use planning should be had several factors and thereupon that Korean zoning mechanism and system including Building Code should be amended because of inducing human activities in buildings and facilities not to demarcate and plan every one of them. First, the factors of urban planning are a rather diversified approach to it than a unified, supplementation of the applicable difference in time between preparing and appling it, a solid controlling system, a micro and macro planning theory and giving serious consideration for the inertia from the existing land use. Second, the applicable amendments for our zoning mechanism including Eluding Code are as follows; a need of reorganization for Zoning Ordinance appricated to different regulation concerning a scale and peculiarity of a oily, a decision of the different earmarked confinement in area to different zone ana from Zoning Ordinance in City Planning Law, a demarcated facilities and the more detailed land use concerning human activies than the exsisting and entrusting decision on the ways and processes of it to every rural city planning committee, a settlement of zone ana area considering for block-unit and Planned Unit Development(P. U. D.), and a need of security jurisprudence in order to solve the zoning regulation rather in City Planning Law than in Building Code that our zoning regulation and controlling system are depended on. According to these applicable amendments to Cheong-ju city, I proposed the conceptions of Cheong-ju city land use planning are as follows; a reinforcement with one cored pattern of urban land use, a selection of gradual urban sprawl by way of city development and renewal, a strengthening accessibility to the core of the city with Plurizing the system of arterial roads, a choice of priority to conservation at the core of tile city and security of open spaces and parking area at the area of the city, a harmonization between development and conservation at the inner ring area that is situated between the core and periphery reserved area in order to develop in the future, a buffered open space situated at the congested area with heterogenous functions, and a completion of urban open space system. The proposal made here so far is for the hope of the better structure of Cheong-ju city that should be granted to the peculiarity developed with educational, cultural, conservative and self-sufficient city functions.

• The Journal of the Korea Contents Association
• /
• v.9 no.5
• /
• pp.50-60
• /
• 2009

Recently, the traffic card is gradually utilized and its several supplementary services have been significantly developed. Particularly, since it is possible to pay fees for buses, taxies, subways, parking and tollgates with only one traffic card, new payment method for economically processing has been focused. This paper presents a new receipt management system which allows possibly paying with several digital cards through PC interfacing terminals. The proposed system is mainly composed of three parts: terminals, middleware, and management servers. A terminal part includes processing module for payment/charging and credit/check/debit cards, etc and its operation is fulfilled through a middleware part. A main task of a middleware part is to connect a terminal part to managing servers through middleware applications. Additionally, processing of several receipt items and monitoring of the terminals to product statistical reports based on the processed result are carried out in the middleware. A management sever part is accomplished for collecting all of transaction histories against users and charging items over allowed province and managing statistical information. The proposed system is currently utilized in the Nam-GU district office and the Nam-GU district health center, Busan, S. Korea, respectively for testing its effectiveness. We conclude from this demonstration that the system is more useful and efficient than the previous processing method especially in that variable payment ways are provided and consumption burden is reduced.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.695-702
• /
• 2010

This paper presents a reinforced concrete composite deck slab system newly developed using a high ductile ECC extrusion panel. In the construction practice, the cracking of reinforced concrete slab often becomes a problem especially in parking garages, underground structures, and buildings. The ECC panel manufactured by extrusion process as a precast product has not only a high-quality in control of cracking but also a merit in applying the construction of concrete slab because the use of ECC panel can realize a formless or half-precast construction with cast-in-place concrete. In the newly developed deck slab system, the ECC extrusion panel is located in the bottom of slab with the thickness of 10 mm, reinforcements are assembled and located on the ECC panel, and finally the topping concrete is placed in the field. In order to evaluate the newly developed slab system, experimental works by four point bending test are conducted to compare with the conventional reinforced concrete slab system. From experiment, the developed deck slab system using a ECC panel gives many improved performances both in control of bending cracking and in load-carrying capacities of slabs.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.57-66
• /
• 2007

According to the rapid economic growth and the escalation of recreational tourism activities due to the change of job and working patterns, currently various traffic problems often occur in tourist areas. As tourist traffic, contrary to general traffic, is not regional but rather from outside the area of interest, it is hard to grasp the traffic situation surrounding the tourist area. Furthermore, since the traffic is concentrated during a limited tourist season, it is difficult to examine and solve the problem. In this study, in order to test the feasibility of introducing a traffic transfer system to reduce congestion in tourist areas, the authors considered the differences in traffic congestion between typical and tourist seasons and designed a willingness to pay model. The willingness to pay amount for a shuttle bus fare is assumed as 1,430 Won and 1,650 Won is assumed for a transfer parking charge. These amounts were slightly above the current bus fare in the study area, but many people thought that the introduction of a traffic transfer system would help to relieve the traffic congestion approaching the tourist area and to develop tourism resources. As the willingness to pay appeared high from the persons used in this study, it was indirectly confirmed that the introduction of a traffic transfer system would be a step in the right direction.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.412-415
• /
• 2017

In this paper, we propose a multi license plate recognition system using high resolution $360^{\circ}$ omnidirectional IP camera. The proposed system consists of a planar division part of $360^{\circ}$ circular image and a multi license plate recognition part. The planar division part of the $360^{\circ}$ circular image are divided into a planar image with enhanced image quality through processes such as circular image acquisition, circular image segmentation, conversion to plane image, pixel correction using color interpolation, color correction and edge correction in a high resolution $360^{\circ}$ omnidirectional IP Camera. Multi license plate recognition part is through the multi-plate extraction candidate region, a multi-plate candidate area normalized and restore, multiple license plate number, character recognition using a neural network in the process of recognizing a multi-planar imaging plates. In order to evaluate the multi license plate recognition system using the proposed high resolution $360^{\circ}$ omnidirectional IP camera, we experimented with a specialist in the operation of intelligent parking control system, and 97.8% of high plate recognition rate was confirmed.