• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.10
• /
• pp.677-690
• /
• 2022

By using an actuator disk method based flow solver, aerodynamic analysis is carried out for a dual ducted fan aircraft, which is one of the VTOL compound aircrafts, and its associated ground effect is analyzed. The characteristics and accuracy of the solver for ground effect analysis is evaluated through a comparison with the results obtained from the sliding mesh technique. The aerodynamic performance and flow field characteristics with respect to the distance from the ground are analyzed. As the ground distance decreases, the fan thrust increases, but the deterioration of total normal force and hovering flight efficiency is identified owing to the decrease in the vertical force of the duct, fuselage, and wing. By examining the flow field in the bottom of the fuselage, the ground vortices and fountain flow generated by the interaction of the fan wake and ground are identified, and their influence on the aerodynamic performance is analyzed. The strength and characteristics of outwash with respect to the ground distance and azimuth direction are analyzed through comparison/examination of velocity profile. Influence of the ground effect with respect to collective pitch angle is also identified.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.1
• /
• pp.43-49
• /
• 2006

Fractal/angle multiplexing is a $LiNBO_3$ crystal using a X-Y Galvano mirror, and the random access concept in fractal/angle multiplexing are discussed in this paper. First, the brief introduction of the designed holographic digital data storage system is presented. Then, the average access time concept for the storage system is newly defined, and the comparison of the average access time between the holographic storage and a conventional optical disk is performed. Second, the basic simulation and experiment to find the X-Y Galvano mirror dynamics are conducted. From this analysis, we find that the average access time in our HDDS which has 6 degree scan angle is about 5 msec. This result is very high performance when it compared with the average access time of a conventional optical disk. Finally, some recording results using fractal/angle multiplexing are presented, then, the relationship between bit error rate and angle mismatch for the each multiplexing are discussed.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.10 no.2
• /
• pp.147-156
• /
• 2007

Purpose: Any battery impacted in the esophagus must be removed urgently because of the possibility of serious complications such as perforation, fistula, and mediastinitis. The use of endoscopic procedures was compared to find the most rapid, effective, and safe method to remove disk batteries. Methods: The cases of 24 children (9 males, mean age, 1.5 years) that had accidentally ingested disk batteries were reviewed. The patients had visited the Department of Pediatrics, Kyungpook National University Hospital from July 1997 to June 2007 for the removal of disk batteries. Endoscopic removal was attempted using a retrieval net or a magnetic extractor with a balloon (condom). The procedure times for removing the ingested battery were compared. Results: Children that ingested batteries with a larger diameter (20 mm) had a greater chance to have esophageal impaction with serious injury, such as esophageal mucosal necrosis or ulcers, as compared to the ingestion of smaller diameter batteries (10 mm) (p<0.01). Endoscopic removal of disk batteries was attempted either using a retrieval net in 10 children or by using a magnetic extractor with a balloon in 6 children. Endoscopic removal using a retrieval net was more effective (mean procedure time: 1.5 min) as compared to using a magnetic extractor with a balloon (mean procedure time: 3.3 min) (p<0.05). Conclusion: Both procedures, either using a retrieval net or a magnetic extractor with a balloon were effective in removing ingested disk batteries. Based on our experience, an endoscopic procedure using a retrieval net was a more effective method for foreign body removal.

• Korean Journal of Weed Science
• /
• v.18 no.4
• /
• pp.304-313
• /
• 1998

Foliar retention of pyribenzoxim (1% EC) was measured using the fluorescent dye rhodamine B, and related to efficacy and phytotoxicity to barnyardgarss (Echinochloa crusgalli) and rice (Oryza sativa cv. Chucheong), respectively. Effects of nozzle types (8002E flat-fan and disk-type), addition of adjuvant, variation of herbicide concentration or spray volume were compared. In barnyardgrass, foliar retention of pyribenzoxim at a recommended condition (application rate : 30g ai/ha, spray volume : 1000 L/ha) was 2.3 to 2.7 or 1.4 to $1.5{\mu}g$ ai/g fresh foliage when sprayed using the disk-type nozzle with or without adjuvant, respectively, and 0.6 to 0.7 or 0.3 to $0.5{\mu}g$ ai/g fresh foliage when sprayed using the flat-fan nozzle with or without adjuvant, respectively. The slope of increase in foliar retention was 1.0 to 1.8 when application rates increased from 10 to 60g ai/ha at 1000 L/ha, while that was 1.6 to 2.4 when spray volume increased from 330 to 2000 L/ha at $30{\mu}g$ ai/L concentration. Foliar retention of pyribenzoxim had a close relationship with herbicidal activity; regardless of spray conditions, retention to provide 90% control was about $0.8{\mu}g$ ai/g fresh foliage, and below this retention amount, efficacy decreased almost linearly. In rice, foliar retention at the recommended condition was 1.9 to 2.3 or 1.2 to $1.3{\mu}g$ ai/g fresh foliage when sprayed using the disk-type nozzle with or without adjuvant, respectively, and 0.6 to 0.9 or $0.3{\mu}g$ ai/g fresh foliage when sprayed using the flat-fan nozzle with or without adjuvant, respectively. The slope of increase in foliar retention was 1.0 to 2.8 when application rates increased from 30 to 120g ai/ha at 1000 L/ha, while that was 1.3 to 4.4 when spray volume increased from 1000 to 4000 L/ha at $30{\mu}g$ ai/L concentration. Despite the great difference in retention, rice phytotoxicity was not observed in any of these spray conditions, suggesting retention differences within 4-fold increase of application rate or spray volume do not affect rice safety. When pyribenzoxim 1EC was sprayed in tank-mix with several other commercial pesticide formulations, its retention to rice foliage tended to increase by 30 to 50%.

• Journal of Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.185-189
• /
• 2001

Essential oils of 21 herb plant samples, using spectrophotometric and paper disc agar diffusion methods under anaerobic conditions, were tested in vitro for their growth-inhibiting activities against Bifidobacterium bifidum, B. longum, Lactobacillus casei, Clostridium perfringens, and Escherichia coli. The responses varied with bacterial strains and plant oils. At 10 mg/disk, all essential oils did not inhibit beneficial intestinal bacteria, except for the oil of Alpinia officinarum and Melaleuca alternifolia against L. casei. Due to their strong growth-inhibitory activities against C. perfringens, E. coli, and L. casei, the activites of nine oils were evaluated at low concentrations. In test with C. perfringens at 1 mg/disk, the oils of Amyris balsamifera, Curcuma longa, M. alternifolia, and Trachyspermum ammi showed moderate activities. Moderate activities against E. coli were observed with the oils of M. alternifolia and T. ammi. These results may be indications of at least one of the pharmacological actions of the four herb plants.

• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.6-15
• /
• 2011

This paper reports the design and fabrication of a micro-electro-mechanical-system(MEMS)-based electrostatic angular microactuator for a dual-stage servo. The proposed actuator employs a novel electrode pattern named "skewed electrode array(SEA)" scheme. It is shown that SEA has better linearity than a parallel plate type actuator and stronger force than a comb-drive based actuator. The moving and the fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, an electrostatic FE analysis was carried out and an empirical force model was established for SEA. A new assembly method which will allow the active electrodes to be located beneath the slider was developed. The active electrodes are connected by inner and outer rings lifted on the base substrate, and the inner and outer rings are connected to platform on which the slider locates. Electrostatic force between active electrodes and platform can be used for exiting out of plane modes, so this provides the possibility of the flying height control. A microactuator that can position the pico-slider over ${\pm}0.5{\mu}m$ using under 20 volts for a 2 kHz fine-tracking servo was designed and fabricated using SoG process.

• Journal of The Korean Astronomical Society
• /
• v.51 no.4
• /
• pp.73-88
• /
• 2018

We present a sample of 54 disk galaxies which have well developed extraplanar structures. We selected them using visual inspections from the color images of the Sloan Digital Sky Survey. Since the sizes of the extraplanar structures are comparable to the disks, they are considered as prominent stellar halos rather than large bulges. A single $S{\acute{e}}rsic$ profile fitted to the surface brightness along the minor-axis of the disk shows a luminosity excess in the central regions for the majority of sample galaxies. This central excess is considered to be caused by the central bulge component. The mean $S{\acute{e}}rsic$ index of the single component model is $1.1{\pm}0.9$. A double $S{\acute{e}}rsic$ profile model that employs n = 1 for the inner region, and varying n for the outer region, provides a better fit than the single $S{\acute{e}}rsic$ profile model. For a small fraction of galaxies, a $S{\acute{e}}rsic$ profile fitted with n = 4 for the inner region gives similar results. There is a weak tendency of increasing n with increasing luminosity and central velocity dispersion, but there is no dependence on the local background density.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.8
• /
• pp.2626-2636
• /
• 1996

A study of soot deposition and reentrainment was carried out both theoretically and experimentally to understand behavior of soot formed by incomplete combustion in a diesel engine. Theoretically, soot deposition on engine cylinder wall and/or piston head was studied with a stagnation point flow approximation. Soot reentrainment occurred upon exhaust gas blowdown was also studied by assuming a long-normal shear velocity distribution. Experimentally, a LPG$O_2/N_2$ flame impinging on a disk, produced by a concentric tubular burner, was chosen as deposition configuration and a shear flow unit with compressed air was installed for the study of reentrainment. For selected flame configuration, soot deposition measurements were conducted and showed that the dominant deposition mechanism was thermophoresis. Distributions of gas temperature and soot number density were estimated by combining data obtained by a B-type thermocouple with a thermophoretic transport theory. Disk temperature distributions were directly measured using a K-type thermocouple. Soot size and morphology were estimated from a TEM photograph. Ratios of soot deposit to reentrained amount were measured for a wide range of shear flow velocities, which showed that the reentrainment model was reasonable.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.8 no.1
• /
• pp.25-30
• /
• 2002

The main purpose of this article is to suggest a modified SNAGs manual method in based of Mulligan techniques. And this study aimed to resolve the back pain which has combined movement dysfunction in lumbar spine, in addition to upgrade of manual therapy technique in clinical field. The results of this study were as following; 1. The first introduction of SNAGs in Korea is the 'International Mulligan Concepts and Techniques Seminar' by Prof. Russell M. Woodman(Quinnipiac college, USA), 1998. SNAGs is defined a mobilization with movement manual therapy that facet joints of the lesion mobilized to anterior-superior direction according to the treatment plane in apophyseal joint of hypomobility. 2. A treatment mechanism of the SNAGs is, Mulligan say, HIVD which is the result of posterior disk bulging from a increased between intervertebral pressure due to hypo-mobile of facet joints in abnormal spine, so therapist should be necessary mobilization of zygophyseal joints especially in disk lesion. 3. Because Mulligan does not yet mentioned SNAGs techniques about a back pain with combined movements dysfunction, so we suggest a modified SNAGs method for manual therapy of back pain patients due to combined movement dysfunction at lumbar.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.36-43
• /
• 2016

Carbon fiber-reinforced silicon carbide (Cf-SiC) and SiC / SiC composites have high thermal conductivity, and excellent corrosion and wear resistance, a low coefficient for thermal expansion and are lightweight. This is why they are commonly used in parts of the aerospace industry to develop an aircraft thrust deflector, jet vane, combustion chamber, elevens, body flap, and a shingle. So, understanding how this state-of-the-art Cf-SiC affects both internal and external crack detection and determining issues during the manufacturing process of composite materials, should be evaluated according to valuation techniques in the external environment. In this paper, we apply a non-contact air ultrasonic technique of non-destructive testing techniques to perform a study on internal defect detection identification and assessment of carbon-fiber reinforced silicon carbide composites to perform basic research and applied research.