• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.229-236
• /
• 2005

To cope with increasing requirements of cost reduction, labor saving, and rapid construction, the purpose of this study is to investigate the structural behavior of PSC monolithic and spliced girders. Three tests were conducted on reduced-scale girder specimens having same type. This paper presents the result of experimental studies on the load-deflection behavior in which different joint and amount of tendon as major variables were investigated. The first one used a monolithic girder was arranged with three tendons. The second one used a spliced girder was joined with three tendons after producing five segments. And the third girder was produced in same conditions with the second girder and arranged with additional tendons. The experimental results show the difference of behavior between monolithic and spliced girders.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.6
• /
• pp.25-38
• /
• 2010

This study focused on the analysis of satisfaction and preference of residents' for water space as a environmental friendly facility in residential complex. The purpose of this study is to serve design data of water space in residential complex, in order to make water space that residents' satisfaction are high. In this study, residents' satisfaction and preferences of water space in 5 residential complex were analyze through a questionnaire survey of residents. The major findings of the study are as follows. First, in terns of the need of the water space, 60.4% of the respondents answered that water space are need to improve the amenity. Secondly, in terms of satisfaction, 57.3% of the respondents have been satisfied with location of water space in the residential complex, and the maintenance satisfaction degree is above average level. Overall satisfaction degree is above average level too, but it is are not high as compared construction cost. Thirdly, in terms of preference, 26.5% of respondents have been prefer to the combined type of water space, and 25.9% of respondents prefer to dropping water type, and 25.9% of respondents prefer to flowing stream type. It appeared that the preference levels of 3 type is high similarly, so we can assume that residents prefer to moving water type because of having a feeling refreshed through the sound of water. The results of this study can be used as the design data of water space in residentialcomplex and expected to contributed in making the water space that residents' satisfaction are high.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.265-272
• /
• 2011

This study designed and manufactured "a DVOR virtual signal generator" to make the monitoring system of preliminary Doppler VHF Omni-directional Radio Range(DVOR) run like its real operation status in a narrow space in order to study "a DVOR virtual monitoring system". The designed and manufactured DVOR virtual signal generator is suitable for the specification of signal that is generated in the currently running equipment. In addition, it is possible to control operation conditions of equipment by using parameter variables, and the circuit construction is largely divided into the input part, the modulation part, the high-gain amplifier, and the power part. "The DVOR virtual monitoring system using the virtual signal designed and implemented in this study is very suitable to be used for low-cost actual education as it can construct the operation status like the real situation in a narrow space without using an actual system like an antenna generating side band.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3542-3547
• /
• 2015

There is commonly used the full depth excavation method of sewer pipeline maintenance in Korea. This induces couple of technical and social problems like increase of construction cost and time for excavation and backfill, increase of public complains and delay of traffic, and so force. In order to overcome these problems, lots of laboratory tests were carried out for sewer pipeline of maintenance materials with trenchless methods. The testing materials are liquid and hardened polyurethane, and polyurethane CIPP. The lab tests were followed by Korean Standard. There are no side effects, like harmless to the human body and air pollution with stink. Judging from the limited test results, all the items tested were satisfied the KS criteria.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.51-58
• /
• 2016

Concrete structure is a construction material with durability and cost-benefit, however the corrosion in embedded steel causes a critical problem in structural safety. This paper presents an evaluation of chloride resistance and pull-off performance with various corrosion level. For the work, OPC(Ordinary Portland Cement) concrete and GGBFS(Ground Granulated Blast Furnace Slag) concrete are prepared with normal steel. Artificially notch induced FRP Hybrid Bar is also prepared and embedded in OPC concrete and accelerated corrosion test is performed. Through the test, FRP Hybrid Bar with notch is evaluated to have insignificant effect on pull-off capacity when corroded steel shows only 21% level of pull-off capacity. Furthermore GGBFS concrete with normal steel shows over 70% level of pull-off capacity due to reduced corrosion currency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.242-247
• /
• 2017

Over- and under-excavation are factors that increase construction cost of tunnels, which makes management essential. Total stations have been used for tunnel surveying because GNSS is difficult to use in tunnels. However, it takes much time to acquire data using total stations. In this study, a total station was integrated with a 3D laser scanner and used for tunnel surveying in Namyangju-si, Gyeonggi-do. The scanning total station reduced the work time compared to the conventional method. Furthermore, reports were effectively generated for overbreak and underbreak for each section and compared with the design. In addition, we could analyze both the cross section and scanned area effectively by using the scanning data. This method can improve the efficiency of tunnel surveying work by combining the advantages of a conventional total station and a 3D laser scanner.

• The KIPS Transactions:PartA
• /
• v.15A no.6
• /
• pp.325-334
• /
• 2008

Flash memory is widely used as a storage medium for mobile devices such as cell phones, MP3 players, PDA's due to its tiny size, low power consumption and shock resistant characteristics. Additionally, some computer manufacturers try to replace hard-disk drives used in Laptops or personal computers with flash memory. More recently, there are some literatures on developing a flash memory-aware $B^+$-tree index for an efficient key-based search in the flash memory storage system. They focus on minimizing the number of "overwrites" resulting from inserting or deleting a sequence of key values to/from the $B^+$-tree. However, in addition to this factor, the size of a physical page allocated to a node can affect the maintenance cost of the $B^+$-tree. In this paper, with diverse experiments, we compare and analyze the costs of construction and search of the $B^+$-tree and the space requirement on flash memory as the node size increases. We also provide sorting-based or non-sorting-based algorithms to be used when inserting a key value into the node and suggest an header structure of the index node for searching a given key inside it efficiently.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.17-25
• /
• 2013

TIn this paper, we propose a model automatically scoring a student's answer for a descriptive problem by using a voting method. Considering the model construction cost, the proposed model does not separately construct the automatic scoring model per problem type. In order to utilize features useful for automatically scoring the descriptive answers, the proposed model extracts feature values from the results, generated by comparing the student's answer with the answer sheet. For the purpose of improving the precision of the scoring result, the proposed model collects the scoring results classified by a few machine learning based classifiers, and unanimously selects the scoring result as the final result. Experimental results show that the single machine learning based classifier C4.5 takes 83.00% on precision while the proposed model improve the precision up to 90.57% by using three machine learning based classifiers C4.5, ME, and SVM.

• Explosives and Blasting
• /
• v.36 no.4
• /
• pp.48-61
• /
• 2018

This case study is concerned with the project of the explosive demolition for the KOGAS office building located in Bundang district in Seongnam city. Since the office building was a kind of long-span beam structures, a mechanical demolition method using jacking support systems was considered in the beginning of the project. With consideration of the excessive reinforcement cost, uncertainty of safety, and prolonged construction period, however, the original plan was later changed to use an explosive demolition method. For the purpose of protecting nearby buildings and facilities during the collapse process, the explosive initiation sequence was elaborately designed to bring down the building structure towards its front left corner. A total of over 550 electronic detonators (Unitronic 600) was used to sequentially initiate the explosives installed at appropriate columns in the first, second, and fifth floors. To diminish dust production, water bags of small and large sizes were respectively installed at each column and on the floors to be blasted. As such, every effort was exercised to mitigate overall noise, dust, and shock vibrations that could be generated during the explosive demolition process for the office building.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.112-120
• /
• 2021

Recently, the number of consumers using digital online distribution platforms is increasing. This caused the rapid growth of the e-commerce market and increased delivery volume in urban areas. The logistics system, designed ar006Fund the city center to handle the delivery volume, operates a delivery system from the outskirts of the city to the urban area using cargo trucks. This maintains an ecosystem of high-cost and inefficient structures that increase social costs such as road traffic congestion and environmental problems. To solve this problem, research is being conducted worldwide to establish a high-efficiency urban joint logistics system using urban railway facilities and underground space infrastructure existing in existing cities. The joint logistics system begins with linking unmanned delivery automation services that link terminal delivery such as cargo classification and stacking, infrastructure construction that performs cargo transfer function by separating from passengers such as using cargo platform. To this end, it is necessary to apply the device to the vertical and horizontal transportation machine supporting the vertical transfer in the flat space of the joint logistics terminal, which is the base technology for transporting cargo using the transfer robot to the destination designated as a freight-only urban railway vehicle. Therefore, this paper aims to derive holistic viewpoints needs for design requirements for vertical and vertical transportation machines and freight transportation standard containers, which are underground railway logistics transport devices to be constructed by urban logistics ecosystem changes.