Journal of Korean Society of Environmental Engineers
/
v.29
no.9
/
pp.989-996
/
2007
In this study, abiotic transformation of 1-naphthol(1-NP) via oxidative-coupling reaction and its reaction products were investigated in the presence of Mn oxides. The reaction products were characterized for their relative polarity using solvent extraction experiment and reverse-phase HPLC, and for structure using CCMS and LC/MS, and for absorption characteristics using UV-Vis spectrometry. The reaction products present in aqueous phase were more polar than parent naphthol and comprised of 1,4-naphthoquinon(1,4-NPQ) and oligomers such as dimers and trimers. Hydrophilic component present in water phase after solvent$(CH_2Cl_2)$ extractions was identified as naphthol polymerized products having molecular weight(m/z) ranging from 400 to 2,000, and showed similar UV-Vis. absorption characteristics to that of foil fulvic acid. Transformation of 1,4-NPQ, which is non-reactive to Mn oxide, to the polymerized products via cross-coupling reaction in the presence of 1-NP was also verified. In this experimental conditions(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5), the transformation of 1-NP into the oligomers and polymerized products were about 83% of initial 1-NP concentrations, and more than 30% of the reaction products was estimated to be water insoluble fractions, not extracted by $H_2O$ methanol. Results from this study suggest that Mn oxide-mediated treatment of naphthol contaminated soils can achieve risk reduction through the formation of oligomers md polymer precipitation.
Kim, Ki-Jae;Park, Chun-Hong;You, Oh-Jong;Shin, Jong-Hee;Park, So-Deuk;Choi, Boo-Sull
Korean Journal of Medicinal Crop Science
/
v.6
no.1
/
pp.38-43
/
1998
This experiment was carried out to gather basic information for improvement of peeling methods in peony (Paeonia lactiflora) roots which have been used for medicinal resources in Korea. Drying time required was shortened in thin root. Optimum drying time after machine peeling appeared to be 20 hrs in 5 to 10mm of root diameter, 39 hrs in 10 to 15mm, 48 hrs in 15 to 20mm, 56 hrs in more than 20mm, but those of unpeeled roots took 11 hrs in 5mm of root diameter and 4 hrs in exposed parent material. Paeoniflorin content in dried roots after peeling was lower than that of unpeeled root. Paeoniflorin content in root below 5mm in diameter was highest (6.15 %) and that was decreased in the increased root diameter up to 20mm, but it was slightly increased in root greater than 20mm in diameter.
Journal of Dental Rehabilitation and Applied Science
/
v.19
no.4
/
pp.269-279
/
2003
This study investigated the mechanical properties of precious metal-ceramic alloy joined by the laser-welding and the soldering compared with the parent metal. Twenty-four tensile specimens were cast in precious metal-ceramic alloy and divided into three groups of eight. All specimens in the control group(group 1) were left in the as-cast condition. Group 2 and 3 were the test specimens, which were sectioned at the center. Eight of sectioned specimens were joined by soldering with a propane-oxygen torch, and the remaining specimens were joined by laser-welding. After joining, each joint diameter was measured, and then tested to tensile failure on an Instron machine. Failure loads were recorded, and then fracture stress(ultimate tensile strength), 0.2% yield strength and % elongation calculated. These data for three groups were subjected to a one-way analysis of variance(ANOVA). Neuman-Keuls post hoc test was then used to determine any significant differences between groups. The fracture locations, fracture surfaces were examined by SEM(scanning electron microscope). The results were as follows: 1) The tensile strength and 0.2% yield strength of the soldered group($280.28{\pm}49.35MPa$, $160.24{\pm}26.67MPa$) were significantly less than both the as-cast group($410.99{\pm}13.07MPa$, $217.82{\pm}17.99MPa$) and the laser-welded group($383.56{\pm}59.08MPa$, $217.18{\pm}12.96MPa$). 2) The tensile strength and 0.2% yield strength of the laser-welded group were about each 98%, 99.7% of the as-cast group. There were no statistically significant differences in these two groups(p<0.05). 3) The percentage elongations of the soldered group($3.94{\pm}2.32%$) and the laser-welded group($5.06{\pm}1.08%$) were significantly less than the as-cast group($14.25{\pm}4.05%$) (p<0.05). 4) The fracture of the soldered specimens occurred in the solder material and many porosities were showed at the fracture site. 5) The fracture of the laser-welded specimens occurred also in the welding area, and lack of fusion and a large void was observed at the center of the fracture surface. However, the laser-welded specimens showed a ductile failure mode like the as- cast specimens. The results of this study indicated that the tensile strengths of the laser-welded joints were comparable to those of the as-cast joints and superior to those of the soldered joints.
We investigated the eating habits and food preferences of middle school students to provide material for establishing dietary and nutritional education at the elementary level. We questioned 270 male and female students attending certain middle schools in the Daegu area about their eating habits and food preferences. Eating habits were found to be most regular for students in families where only one parent worked and irregular for students in families where both parents worked. There was a positive correlation between a higher level of academic education of the father and the frequency of consumption of instant foods. There was also a positive correlation between a higher level of academic education of the mother and the frequency of snack consumption. Male students had a higher preference for consuming animal foods than did female students. Students that lived in extended families tented to have a higher preference for vegetable foods. On the other hand, students that lived in nuclear families and students that lived in families where both parents worked preferred snacks more. Based on these results, parental employment and academic education level influences the eating habits and food preferences of middle school students.
The granitic rocks distributed in the southern part of the Yangsan Fault are classified into five distinct rock facies based on the field relation, petrography and geochemical characteristics. These five different rock facies can be grouped into two considering their origins. Group I, which reveals various evidences of magma mixing, includes three rock facies of granodiorite, enclave-rich porphyritic granite, and enclave-poor porphyritic granite. Group H intruding Croup I includes equigranular granite and micrographic granite with no evidence of magma mixing. It is suggested that the distinctively different trace element and isotopic chemistries between group I and II, support evolution from the different parental magma. It is suggested that the three rock facies in group I were generated by different degrees of magma mixing in addition to fractionation of plagioclase. MMEs experienced fractionation of biotite. The two facies in group H seem to have been generated from different parent magma from group I and evolved by fractionation of K-feldspar. The Rb-Sr whole-rock ages of the group I rocks yield $59.2\~58.9Ma$, and those of the group II rocks give 53. $3\~51.7Ma$, regardless of their distribution whether they occur in the eastern or western parts of the Yangsan Fault. Based on Sm-Nd isotope compositions, depleted mantle model ages $(T_2DM)$ of the group I range $0.8\~0.9Ga$, while those of the group II$0.6\~0.7Ga$.
Journal of the Korea Academia-Industrial cooperation Society
/
v.16
no.11
/
pp.8046-8056
/
2015
The purpose of this study is the study of factors affecting the life satisfaction of disabled children parents. Survey data metropolitan area and Gyeonggi-do special schools, day shelter, Disabled Welfare, especially on the national branch in Korea Funny disabled parent meetings, through 389 branches were collected material wealth targeting parents with disabilities. Statistical analysis SPSS 19.0 program utilizes factor analysis, reliability analysis. And parents of children with disabilities and environmental factors are the demographic characteristics in order to analyze the impact on life satisfaction as a control variable, and the environmental factors as independent variables were performed hierarchical regression analysis. Results are crazy and the positive(+) influence a religious presence and the average monthly income of demographic characteristics in the satisfaction of life, environmental factors all had significant influence on life satisfaction. In other words, family support, disability, social networks, personal nature had a positive(+) influence on life satisfaction of disabled children parents, the relative influence of these factors include family support, disability, social networks, net of personality. It was in. The result is handicapped parents receive emotional support and help from family, the lower the degree of disability of the child, as participation in meetings or disability welfare various programs and handicapped parents, and the more it has a positive character increased satisfaction in life that can be interpreted.
This study was carried out to estimate the degree of heterosis and heterobeltiosis, and the heritability and genetic correlation in F$_1$hybrid produced by reciprocal crosses between two six-rowed hulled barley (Gangbori and Olbori) and three six-rowed naked barley (Saechalssalbori, Saessalbori, and Moodeongssalbori). Heterosis was observed positively in traits such as cults length, spike length, awn length, leaf length, leaf width, number of spikes per plant, number of grains per spike, and 1000 grain weight. Heterosis and heterobeltiosis from the crosses with hulled barley as a material parent showed higher performance in culm length, leaf length, leaf width, number of spike per plant, number of grains per spike. The hulled grain characteristics is dominant over the naked one. The highest heritability was confirmed in leaf width with a value of 94.5% and overall high heritability was observed in most traits with the range from 76.7% to 94.5%. In an analysis of correlation coefficient, higher genetic correlations were observed between leaf length and number of spikes per plant(0.970), between cults length and number of grains per spike(0.963), and between awn length and leaf length(0.862) in the forward crosses in which hulled barley was maternal. In the reverse crosses, higher genetic correlation was observed between culm length and spike length(0.926), between awn length and leaf length(0.922), and between number of spikes per plant and number of grains per spike(0.713).
The dry method and wet method are currently used for the recovery of platinum group metals (Pt, Rh, Pd) contained in spent automobile catalysts. The study herein aims to identify the melting condition and optimum collector metal in accordance with a comparison of each concentration change in melting waste catalysts, using Fe and Cu in a basic experiment to recover waste catalysts through application of the dry melting method. As a summarized result of the experiment herein, it was determined to be more advantageous to use Fe as a parent material rather than Cu from the aspect of recollection rate, and the concentration change rate of platinum group metals within slag was greatly enhanced at $1,600^{\circ}C$ melting condition rather than at $1,500^{\circ}C$ in terms of melting processing temperature. The mean concentration of platinum group metals - Rh, Pd and Pt - within slag after a melting process at $1,600^{\circ}C$ were 6.21 ppm, 5.98 ppm and 6.97 ppm. The Rh and Pd were 50.58% and 55.31% respectively greater than the concentration change rate of platinum group metals in slag at a melting temperature of $1,500^{\circ}C$. However, since the initial concentration of Pt within the waste catalysts was 12.9 ppm, is relatively low, it was difficult to compare concentration change rates after the melting process.
Journal of The Geomorphological Association of Korea
/
v.21
no.4
/
pp.19-40
/
2014
Rock rebound values and chemical compositions of Gamak island at Sangha, Gochang, Jeollabuk do are analysed as a part of geomorphic survey of that area. Some corestones are formed by deep weathering found from the summit of rock mass of Gamak island, while the rocks a part of weathering front are exposed at the foot of the island. Rebound values of rock increase toward coastal plain, so summit would be weak in resistance to erosion. It can be assumed that chemical weathering is more active at the summit by the chemical index of alteration and changes in chemical composition ratio. However it should be mentioned that the samples are taken from the surface of the rock mass that more fresh part will be exposed when the weathered parts are removed. The chemical composition and CIA values of the polygonal cracks found from on the surface of weathering rind showed that this part has values between those of the summit and the footslope. The bottom of weathering rind with polygonal cracks has higher CIA value than those of the surface. Though it supports the result from the Bisul Mt., there also difference in the ratio of SiO2. It looks caused by the difference in weathering environment and chemical difference in parent rock. In summary Gamak island is the remnants of weathering front after removal of weathered material. The removal processes are more active at the footslope where the coastal processes are stronger than the summit.
Journal of Korea Entertainment Industry Association
/
v.14
no.7
/
pp.333-342
/
2020
Children grow and develop through play. Play is being used as a friend and a learning material and tool in everyday life of children. It is a research study aimed to empirically analyze the effects of father's play belief and play participation on child's playfulness. A survey was carried out for the selected 284 children aged 5 years and older attending kindergarten located in D-gu, Seoul in order to achieve the goal of this study. Frequency analysis, descriptive statistics, reliability verification, correlation analysis, and regression analysis were conducted on the data collected through the survey by using the SPSS program, and the research results were derived as below. First, it showed that father's play belief and play participation have a positive effect on child's playfulness of physical spontaneity, social spontaneity, cognitive spontaneity, expression of joy, and a sense of humor. Second, father's play participation had a significant effect as a partial parameter in the relationship between father's play belief and child's playfulness. Thus, it was drawn the conclusion that father's play belief and play participation are important variables that can predict child's playfulness. Therefore, It will be necessary to promote children's playfulness development by continuously providing parent education programs on creating an atmosphere of various interaction at home through plays in the relationship between father and child and a desirable role of father in the play activities with child at the level of preschool educational institutions.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.