• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.768-773
• /
• 2009

This paper demonstrates the digital communication in air using the parametric array. The stepped-plate transducer which is suitable for high-power and high-efficient radiation is used to generate the difference frequency wave with the parametric array. The primary frequencies are selected to 83 kHz and 122 kHz and the resulting difference frequency wave at the frequency of 39 kHz is used for the communication. The modulation method is selected to On-Off Keying method. The waveform and signal-to-noise ratio (SNR) is measured and analyzed to see the characteristics of the digital communication using the parametric array. The proper distance for the communication using parametric array is about 3 m. The measured beam width of the 3dB SNR reduction was $14^{\circ}$. The possibility of the communication in air using the parametric array is confirmed and the high directional characteristic of the communication using the parametric array is expected to have the advantages for the multi path and the security problems.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.175-185
• /
• 2018

The purpose of this study is to analyze the concept of 'Gradual Differentiation' in parametric design in terms of pure model logic and thus describe the distinctive feature from the previous design method. To meet the purpose, it explores external cases like gradual factor identified in natural phenomenon and artworks and define the inherent model principles into "Self-similarity', "Correlation', and 'Temporality' by examining these features in terms of algorithm. Meanwhile, it identified the principle of gradual model representation in parametric design within a single system called 'Attractor System' by applying these three concepts into specific methods of parametric design, and by interpreting the logical structure through the association among 'Attractor', 'Field', and 'Differentiation'. The creative utilization of parameter shows that gradual model process in parametric design does not mean a passive "conversion process" merely replacing natural parameter with algorithm; rather, it refers to an active "generating process" creating new meanings and value. By continuing this process of conceptual understanding and insight, creative perspective and practical ability to interpret parameter can be improved.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.3
• /
• pp.279-297
• /
• 2003

The purpose of this paper is to analyze the determinants of company R＆D investment with zero observations by using the data of R＆D Scoreboard published by Ministry of Science and Technology(2002). Conventional parametric approach to dealing with zero investments is not robust to heteroscedastic and/or non-normal error structure. Thus, this study applies symmetrically trimmed least squares(STLS) estimation as a semi-parametric approach to dealing with zero R&D investments. The result of specification test indicates the semi-parametric approach outperforms the parametric approach significantly. Moreover, the results of the study provide various implications as summarized below. The R&D investment of IT company is larger than that of non-IT company. The R&D investment has a positive relation to foreigners' investment ratio. The higher degree of financial self-reliance is, the larger the R&D investment is. Firm size variables such as sales amount and the number of workers are positively related to R&D investment. The sales elasticity of R&D investment is larger than one. However, the workers elasticity of R&D investment is smaller than one.

• Structural Engineering and Mechanics
• /
• v.88 no.1
• /
• pp.43-52
• /
• 2023

This paper handles the results of an extensive parametric study on the rotational stiffness of the flexible base connection using ABAQUS program. The results of the parametric study show the relation between the applied moment and the relative rotation for 96 different base connections. The configurations of the studied connections considered different numbers, diameters, and spacing of the anchor bolts along with different thicknesses of the base plate to investigate the effect of these parameters on the rotational stiffness behavior. The results of the previous parametric research used through the whale optimization algorithm (WOA) to detect different equation formulation of the moment-rotation (M-Ɵ_r) equation to detect optimum equation simulates the general nonlinear rotational behavior of the flexible base connection considering all variables used in the parametric study. WOA is a relatively new promising algorithm, which is used in different types of optimization problems. For more verification, the classical genetic algorithm (GA) is used to make a comparison with WOA results. The results show that WOA is capable of getting an optimum equation of the M-Ɵ_r relation, which can be used to simulate the actual rotational stiffness of the flexible base connections. The rotational stiffness at H/150 can be calculated using WOA (1) method and be used as a design aid for engineering design.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.271-273
• /
• 2015

The bulk motion of star clusters can be determined after careful membership analysis using parametric or non-parametric approaches. This study aims to implement non-parametric membership analysis based on Binned Kernel Density Estimators which takes into account measurements errors (simply called BKDE-e) to determine the average proper motion of each cluster. This method is applied to 178 selected star clusters with angular diameters less than 20 arcminutes. Proper motion data from UCAC4 are used for membership determination. Non-parametric analysis using BKDE-e successfully determined the average proper motion of 129 clusters, with good accuracy. Compared to COCD and NCOVOCC, there are 79 clusters with less than $3{\sigma}$ difference. Moreover, we are able to analyse the distribution of the member stars in vector point diagrams which is not always a normal distribution.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.552-560
• /
• 2004

Stone column is a soil improvement method and can be applicable for loose sand or weak cohesive soil. Since the lack of sand in Korea, stone column seems one of the most adaptable approach for poor ground as a soil improvement method. However, this method was not studied for practical application. In this paper, the most effective design parameters for the being capacity of stone column were studied. The parametric study of major design factors for single stone column was carried out under the bulging and general shear failure condition, respectively. Especially, a test result of single stone column by static load was compared with the bearing capacity values of suggested formulas. The analysis result showed that the ultimate bearing capacity by the formula was much less than the measured value by the static load test. Especially, the result of the parametric study under general shear failure condition showed that the bearing capacity has apparent difference between each suggested formulas with the variation of the major design parameters. Therefore, the result of this study can be a suggestion which is applicable for the field test and the future research.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.163-164
• /
• 2023

The technical proposal bidding system emphasizes the evaluation of the construction company's technical capabilities, with the aim of improving the quality and cost-effectiveness of the construction. However, in the VE analysis and proposal process for technical proposal bidding, the ideas are often reused from similar past construction projects, and the application of new construction technologies/methods is often lacking. Therefore, this study proposes a methodology for managing VE proposal information by integrating it into a BIM model using parametric modeling. This research developed database based on the existing VE proposals and new construction technology/method information from the Korea Institute of Civil Engineering and Building Technology. And by using parametric modeling, the proposed method integrate the VE database with BIM model. The methodology proposed in this study is expected to improve the reliability and effectiveness of VE-related idea proposals in technical proposal bidding.

• KSTLE International Journal
• /
• v.2 no.1
• /
• pp.35-39
• /
• 2001

In this paper, statistical approach is undertaken to investigate the classification of wear debris which is the key function of objective assessment of wear debris morphology. Wear tests are run to produce various kinds of wear debris. The images of wear debris from wear tests are captured with image acquisition equipment. By thresholding, two-dimensional binary images of wear debris are made and, then, morphological parameters are used to quantify the images of debris. Parametric and nonparametric discriminant method are employed to classify wear debris into predefined wear conditions. It is demonstrated that classification accuracy of parametric and nonparametric discriminant method is similar. The selected use of morphological parameters by stepwise discriminant analysis can generally improve the classification accuracy of parametric and nonparametric discriminant method.

• International Journal of Vascular Biomedical Engineering
• /
• v.3 no.2
• /
• pp.17-24
• /
• 2005

The main purpose of our study is to propose a new methodology to develop the multi-parametric measure including linear and nonlinear measures of heart rate variability diagnosing cardiovascular disease. We recorded electrocardiogram for three recumbent postures; the supine, left lateral, and right lateral postures. Twenty control subjects (age: $56.70{\pm}9.23$ years), 51 patients with angina pectoris (age: $59.98{\pm}8.41$ years) and 13 patients with acute coronary syndrome (age: $59.08{\pm}9.86$ years) participated in this study. To develop the multi-parametric measure of HRV, we used the multiple discriminant analysis method among statistical techniques. As a result, the multiple discriminant analysis gave 75.0% of goodness of fit. When the linear and nonlinear measures of HRV are individually used as a clinical tool to diagnose cardiac autonomic function, there is quite a possibility that the wrong results will be obtained due to each measure has different characteristics. Although our study is a preliminary one, we suggest that the multi-parametric measure, which takes into consideration the whole possible linear and nonlinear measures of HRV, may be helpful to diagnose the cardiovascular disease as a diagnostic supplementary tool.

• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.70-78
• /
• 2016

This paper aims to describe a case study of parametric interior design based on BIM (Building Information Modeling). As the practical use of BIM-based design grows, its influence expands into the field of interior architecture design. BIM makes possible to check various design plan, reach decision making in an effective way, and change design plan in an efficient method. Therefore, BIM is also promising field in interior architecture design. However, compared to other fields in architecture, engineering, and construction (AEC) industry, there have been less research and projects on BIM in the field of interior architecture. For increasing the feasibility of adapting BIM in interior architecture design, this paper describes a case study-projecting images for designing interior panels using parametric modeling. This process needs elaborate, delicate, and precise steps for harmonious output. For continuous use of building, users look forward to the design which variable and changeable according to user's preference and environment. Therefore, demand for parametric design in the interior design part such as panel pattern design for various decoration is growing. Treated process in this paper deals with an advanced phase which much effective in decreasing time consumption and useless part of process. Finally, this paper suggests the possibility of using BIM in the interior design process and field where BIM can be applied.