• Title/Summary/Keyword: Parameter Extraction

Search Result 492, Processing Time 0.034 seconds

Modal Parameter Extraction of Seohae Cable-stayed Bridge : II. Natural Frequency and Damping Ratio (서해대교 사장교의 동특성 추출 : II. 고유진동수와 감쇠비)

  • Kim, Byeong Hwa;Park, Jong-Chil
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.5A
    • /
    • pp.641-647
    • /
    • 2008
  • This paper introduces a new technique that can extract natural frequencies and damping ratios from output-only vibration data. Firstly, the free vibration data is obtained from the cross correlations of the output-only response data using a singular value decomposition process. Secondly, the well-known system identification algorithm is applied to extract the natural frequencies and damping ratios from the extracted free vibration data. Comparing to ERADC technique, the accuracy of the proposed modal parameter identification algorithm has been numerically examined. Furthermore, the practicability of the proposed algorithm has been examined through the output-only acceleration data collected from the Seohae cable-stayed bridge. Using the proposed technique, total 24 modes have been identified for the deck plate motions of the bridge.

Distance measurement system compensated parameters for extraction of 3D distance (원거리 물체의 3차원거리 측정시의 파라미터 보정된 거리측정시스템)

  • Kim, Jeong-Man;Kim, Young-Min;Kim, Won-Sup;Hwang, Jong-Sun
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.605-606
    • /
    • 2005
  • Depth error correction effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount. Such error compensation effect with the calibrated pixel distance parameter is demonstrated with various experimental results.

  • PDF

An Excess Carrier Lifetime Extraction Method for Physics-based IGBT Models

  • Fu, Guicui;Xue, Peng
    • Journal of Power Electronics
    • /
    • v.16 no.2
    • /
    • pp.778-785
    • /
    • 2016
  • An excess carrier lifetime extraction method is derived for physics-based insulated gate bipolar transistor (IGBT) models with consideration of the latest development in IGBT modeling. On the basis of the 2D mixed-mode Sentaurus simulation, the clamp turn-off test is simulated to obtain the tail current. The proposed excess carrier lifetime extraction method is then performed using the simulated data. The comparison between the extracted results and actual lifetime directly obtained from the numerical device model precisely demonstrates the accuracy of the proposed method.

Method that determining the Hyperparameter of CNN using HS algorithm (HS 알고리즘을 이용한 CNN의 Hyperparameter 결정 기법)

  • Lee, Woo-Young;Ko, Kwang-Eun;Geem, Zong-Woo;Sim, Kwee-Bo
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.27 no.1
    • /
    • pp.22-28
    • /
    • 2017
  • The Convolutional Neural Network(CNN) can be divided into two stages: feature extraction and classification. The hyperparameters such as kernel size, number of channels, and stride in the feature extraction step affect the overall performance of CNN as well as determining the structure of CNN. In this paper, we propose a method to optimize the hyperparameter in CNN feature extraction stage using Parameter-Setting-Free Harmony Search (PSF-HS) algorithm. After setting the overall structure of CNN, hyperparameter was set as a variable and the hyperparameter was optimized by applying PSF-HS algorithm. The simulation was conducted using MATLAB, and CNN learned and tested using mnist data. We update the parameters for a total of 500 times, and it is confirmed that the structure with the highest accuracy among the CNN structures obtained by the proposed method classifies the mnist data with an accuracy of 99.28%.

A New Extraction Method of GaAs/InGaP HBT Small-signal Equivalent Circuit Model Parameters (GaAs/InGaP HBT 소신호 등가회로 모델 파라미터의 새로운 추출방법)

  • 이명규;윤경식
    • Proceedings of the IEEK Conference
    • /
    • 2000.11a
    • /
    • pp.357-360
    • /
    • 2000
  • This paper describes a parameter extraction method for HBT(Heterojunction Bipolar Transistor) equivalent circuit model without measurements of special test structures or numerical optimizations. Instead, all equivalent circuit parameters are calculated analytically from small-signal S-parameters measured under different bias conditions. These values being extracted from the cutoff mode can be used to extract intrinsic parameters at the active mode. This method yields a deviation of about 1.3 % between the measured and modeled S-parameters.

  • PDF

The Pitch Extraction of Voiced Speech by the Comparison Between the Original and the Repeated Segmental Waveform. (원 파형과 임의 반복시킨 파형의 비교에 의한 유성음의 피치검출)

  • Bae, Myung-Jin;Ann, Sou-Guil
    • Proceedings of the KIEE Conference
    • /
    • 1988.07a
    • /
    • pp.39-42
    • /
    • 1988
  • In speech signal processing, it is necessary to estimate exactly the pitch. We propose a new algorithm which uses the correlation coefficient between the original and the repeated segmental waveform in the frame as a parameter in the pitch extraction. The correlation coefficient in the frame reflects the periodic component and the transient ratio of the waveform.

  • PDF

Mother Wavelet Transform using Distribution Utility of Fault Point Extraction (원형 웨이브릿 변환을 이용한 배전계통의 고장점 추출)

  • Park, In-Deok;Lee, Seung-Hwan;Choi, Kwang-Jin;Kim, Si-Kyung
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.58 no.10
    • /
    • pp.1855-1860
    • /
    • 2009
  • This paper caused a distribution utility to generation of analysis fault several cases on the ground of substation in a energy meter three phase current, voltage data measurement to fault type and characteristics. Mother wavelet transformation of suitable to method algorithm from the distribution utility to generation of fault in image impedance etc several parameter for utility characteristics effective to probatory fault point extraction.

Feature Extraction using Discrete Wavelet Transform and Dynamic Time-Warped Algorithms in Wireless Sensor Networks for Barbed Wire Entanglements Surveillance (철조망 감시를 위한 무선 센서 네트워크에서 이산 웨이블릿 변환과 동적 시간 정합 알고리즘을 이용한 특징 추출)

  • Lee, Tae-Young;Cha, Dae-Hyun;Hong, Jin-Keun;Han, Kun-Hui;Hwang, Chan-Sik
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.4
    • /
    • pp.1342-1347
    • /
    • 2010
  • Various researches have been studied on WSN(wireless sensor network) for barbed wire entanglements surveillance applications such as industry facilities, security area, prison, military area, airport, etc. Currently, barbed wire entanglements surveillance is formed wire sensor network environment. Traditional wire sensor network guarantee high data transmission rate. Therefore, wire sensor network use fast fourier transform of data of high transmission rate for extraction of feature parameter. However, wireless sensor network in comparison with wire sensor network has very low data transmission rate. Therefore, wireless sensor network doesn't use fast fourier transform of wire sensor network for extraction of feature parameter. In this paper, proposed method use 1 level approximation coefficient of DTW(dynamic time-warped) algorithms based on DWT(discrete wavelet transform) for extraction of detection feature parameter and classification feature parameter for barbed wire entanglements surveillance. l level approximation coefficient have time information and frequency information of signal. Therefore, Dynamic time-warped algorithms based on discrete wavelet transform improve detection and classification of target rather than using energy of signal.

A Study on the Interconnection Parameter Extraction Method in the Radio Frequency Circuits (RF회로의 Interconnection Parameter 추출법에 관한 연구)

  • 정명래;김학선
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.7 no.5
    • /
    • pp.395-407
    • /
    • 1996
  • In this paper, we describe the crossover of the parasitic capacitance at the interconnections for the system miniature, analyse ground capacitance and mutual capacitance due to actually coupled line in the ICs or MCMs. From the results of deviding interconnection line with infinite parts, using Green's function with image charge method and moments, we could obtain 70% decrease of system runtime parasitic inductance because of simplicity of transforming formular.

  • PDF

An Extraction of Position and Attitude Parameters of SPOT (SPOT 위성의 위치 및 자세 Parameter 추출)

  • Moon, Byeong-Moo;Um, Gi-Man;Lee, Kwae-Hi
    • Proceedings of the KIEE Conference
    • /
    • 1991.07a
    • /
    • pp.829-832
    • /
    • 1991
  • Attitude and position parameter of satellite is needed in producing digital elevation model. This paper propose a method which determines the order of polynomial and initial values of satellite exteria parameters using header file of computer compatible tape. Experiments on a SPOT level 1A full science show that planimetric error is 11m and the altimetric error is about 18.3m.

  • PDF