• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.265-267
• /
• 2001

In this paper, some optical parameters which have effects on the measuring precision and sensitivity of optical current sensor are analyzed. Each parameter occurs changes of specific characteristics of optical sensor system. The influences of performance and characteristics variation of optical current sensor are described in accordance with the changes of optical output power, optical bias point which is called phase difference, and a specific constant related to sensor material and wavelength of light source.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2745-2748
• /
• 2003

In this paper, we implement the photoplethysmo-graphy system that have three channel pulse wave detects and one channel ECG amplifier. In order to detect the artery state, we measured the pulse waves at different positions, simultaneously. In general, arterial vascular system suffers the decrease of compliance, increase of resistance, and decrease of distensibility through aging. Therefore, we compared and analyzed variation of tile Pulse waves parameter both in time and frequency domains that is concerned with the changes of arterial characteries. And then evaluated the correlation coefficients between the parameters variation and the age group. As the result of experiment, we found that the Parameters have a significant correlation about aging.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.204-208
• /
• 2011

In this paper, the design area of a fabricated solar cell has been analyzed with respect to its charge density. The mathematical calculation used for charge-density derivation was obtained from the 2001 version of a MATHCAD program. The parameter range for the calculations was ${\pm}1{\times}10^{17}cm^{-3}$, which is in the normal parameter range for n-type doping impurities ($7.0{\times}10^{17}cm^{-3}$) and also for p-type impurities ($4.0{\times}10^{17}cm^{-3}$). Therefore, it can be said that the fabricated solar-cell design area has a direct effect on charge-density changes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1741-1744
• /
• 2005

In this paper, we proposed an adaptive skill element based on error signal. We assume that human progress their skills of actions based on errors, then an inverse dynamic of human motion have to changes. Human controller consists from feedback element (FB) and feed forward element (FF) and their elements cooperate to control actions. Under the assumption, we vary the connection of FF and FB by error signal. We propose the index function for change of a skill parameter. From results of the numerical simulations for the varying skill parameter with index function, we consider that the position error given by our vision changes the skill element and we confirm that the position error is the one of the estimate function for the improvement in our skill.

• Journal of Power System Engineering
• /
• v.18 no.2
• /
• pp.77-82
• /
• 2014

The air spring is widely used in various fields such as a suspension system and an anti-vibration system because the natural frequency is kept constant regardless of the change in the load, spring constant is easy to change, and, vibration and shock isolation performance are excellent. The purpose of this study is to derive a nonlinear governing equation of an air spring, to analyze the effect of the various parameters on the dynamic stiffness of the air spring, and, to suggest a more efficient design method of an air spring system. In order to do so, this study investigates the impact of all the parameters that could affect the dynamic stiffness of the air spring while changing the excitation amplitude and the frequency with a developed governing equation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.804-811
• /
• 1997

In the CDMA mobile communication system, reverse power control can be used to minimize the interference level for a good quality of the voice channel, and used to maxmize the system capacity. In this paper, we have analyed the environment of the K-parameter and the access procedure for the mobile station, and proposed a new algorithm for the access probe procedure of the station. K-parameter is determined according to the environment of the base station and access probe can adaptively control the power according to the position changes of the mobile station or the rapid and various state changes of the channel. Simulation results in the limited test environment show that it can increase the system capacity and decrease the power comsumption of the mobile station while maintaining the good and stable quality of the voice channel.

• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.239-245
• /
• 2016

The purpose of this article was to review the changes in translucency of direct esthetic restorative materials after curing, aging and treatment. As a criterion for the evaluation of clinical translucency changes, visual perceptibility threshold in translucency parameter difference (${\Delta}TP$) of 2 was used. Translucency changes after curing were perceivable depending on experimental methods and products (largest ${\Delta}TP$ in resin composites = 15.9). Translucency changes after aging were reported as either relatively stable or showed perceivable changes by aging protocols (largest ${\Delta}TP$ in resin composites = -3.8). Translucency changes after curing, aging and treatment were perceivable in several products and experimental methods. Therefore, shade matching of direct esthetic materials should be performed considering these instabilities of translucency in direct esthetic materials.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.195-198
• /
• 2000

Sliding mode control method is popularly used for robustness to distrurbance and variance of systems internal parameter. However, one of the serious problem of this method is Chattering which occurs in neighborhood of sliding manifold. Another problem is that we cannot expect robustness before system starts sliding mode. A new tuning method of sliding manifold which changes the parameter of sliding manifold dynamically using Wavelet Neural Network is proposed in this paper. We can expect the better performance in sliding mode control by the wavelet neural networks excellent property of approximating arbitrary function for multi-resolution analysis and decrease chattering drastically.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.295-305
• /
• 2002

We shall propose several estimators for the shape and scale parameters in a generalized uniform distribution when both parameters are polynomial of a known exposure level, and obtain expectations and variances for their proposed estimators. And we shall compare numerically efficiencies for the several proposed estimators for the shape and scale parameters in a generalized uniform distribution in the small sample sizes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.258-262
• /
• 1990

Several optimum control algorithms have been proposed to minimize the robot cycle time by velocity scheduling. Most of these algorithms assume that the dynamic and kinematic characteristics of a manipulator are fixed. This paper presents the study of a minimum-time optimum control for robotic manipulators considering parameter changes. A complete set of solutions for parameter identification of the robot dynamics has been developed. The minimum-time control algorithm has been revised to be updated using estimated parameters from measurements.