• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권9호
• /
• pp.273-278
• /
• 2014

최근 전력의 수요공급 불균형으로 전력사용 피크시간대의 전력사용 강제 제한이 불가피하다. 따라서, 본 논문에서는, 피크전력이 발생하지 않는 시간대의 전기를 저장하고 전력부족이 예상되는 피크전력 시간대에는 저장전력을 공급하는 병렬운전 기기의 회로를 설계하는데 있다. 이 회로설계를 통하여, PRS의 핵심기능인 상용전원과 인버터 발생전원의 병렬연결 운용으로, 상용전원의 피크치 전력을 조절할 수 있었다. 또한 효율을 높이기 위하여 Transless Power Circuit DC-AC 인버터를 개발하였다. 더 나아가, 가변임피던스 제어를 적용하여 무정전 전원장치의 저장전력을 상용전원과 연계함으로써, 기존의 무정전 전원장치에서 구현을 못하고 있는 저장전력 사용시간을 획기적으로 늘릴 수 있는 기술구현 가능성을 입증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제15권12호
• /
• pp.1-9
• /
• 2010

본 논문에서는 첨단 통신 기술을 포함한 IT 기술을 전통산업과 융합한 병렬 이벤트 기반 원격 IT 융합 사례들을 개발하였다. IT 융합 사례들은 다수의 장치와 사용자가 동시에 시스템에서 제공되는 서비스를 이용하거나 이벤트를 발생시킨다. 따라서 다양한 장치들로부터 동시에 발생되는 이벤트를 처리하기 위해 병렬 처리 기법이 필요하다. 이에 본 논문에서는 스레드를 생성하여 병렬 처리가 가능하도록 개발하였으며, 또한 장치와 원격 정보 송수신을 위해 무선 통신 및 전력선 통신과의 연결을 할 수 있는 기술을 개발하였다. 그리고 장치 및 장치와 사용자 포털에서 발생하는 이벤트들을 논리적으로 모델링하기 위해 XML을 이용하여 객체 지향 모델링 기법으로 모델링하였다. 특히 결과들을 효과적으로 보여주기 위해 다양한 시각적인 사용자 인터페이스, 즉 그래프, 테이블 및 그래프와 테이블을 혼합한 방식을 이용하여 실시간으로 볼 수 있도록 개발하였다.

• 대한전자공학회논문지TC
• /
• 제38권3호
• /
• pp.1-8
• /
• 2001

DS/CDMA방식의 이동통신 시스템에서 다중접속 및 다중경로 페이딩 간섭을 제거하기 위하여 비교적 구조가 간단한 병렬 간섭제거기가 이용된다. 다단계로 구성되는 병렬 간섭제거방식에서 다중접속 간섭의 제거 성능을 향상시키기 위하여 간섭의 정확한 추정이 필수적이다. 본 논문에서는 제거성능의 향상을 위해 NLMS(Normalized Least Mean Square)알고리즘으로 가중치(weight)를 계산하는 적응 제거방식과 시험 검파기로서 HT(Hyperbolic Tangent)검파방식에 NZ(Null Zone)을 이용하는 새로운 검파방식을 제안하고 모의실험을 통하여 그 성능을 분석하였다. 모의실험 결과 제안하는 방식이 비트오율 $2{\times}10^{-2}$에서 기존의 제거기에 비해 사용자수가 약 48%정도 증가하는 개선된 성능을 얻었다.

• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.205-213
• /
• 2021

Due to the advantage of reducing the voltage applied to the switch semiconductor, the input series and output parallel combination is widely used in systems with high input voltage and large output current. On the other hand, the LLC converter is widely used as a high-efficiency power converter, and when connected by ISOP combination, there is a possibility that input voltage imbalance may occur due to a mismatch of passive devices. To avoid damaging the switching device, this study analyzed the DC-link voltage imbalance of a high-capacity supply using an ISOP LLC converter. In addition, the case where DC-link unbalance control was applied and the case not applied was analyzed respectively. Based on this analysis, an initial start-up algorithm was proposed to prevent input power semiconductor device damage due to DC-link over-voltage. The effectiveness of the proposed algorithm has been verified through simulations and experiments.

• ETRI Journal
• /
• 제23권1호
• /
• pp.23-32
• /
• 2001

Examination of the statistical variation of integrated passive components is crucial for designing and characterizing the performance of multichip module (MCM) substrates. In this paper, the statistical analysis of parallel plate capacitors with gridded plates manufactured in a multilayer low temperature cofired ceramic (LTCC) process is presented. A set of integrated capacitor structures is fabricated, and their scattering parameters are measured for a range of frequencies from 50 MHz to 5 GHz. Using optimized equivalent circuits obtained from HSPICE, mean and absolute deviation is calculated for each component of each device model. Monte Carlo Analysis for the capacitor structures is then performed using HSPICE. Using a comparison of the Monte Carlo results and measured data, it is determined that even a small number of sample structures, the statistical variation of the component values provides an accurate representation of the overall capacitor performance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.458-464
• /
• 2017

A magnetic tunnel junction (MTJ) based ternary content addressable memory (TCAM) is proposed which provides non-volatility. A unit cell of the TCAM has two MTJ's and 4.875 transistors, which allows the realization of TCAM in a small area. The equivalent resistance of parallel connected multiple unit cells is compared with the equivalent resistance of parallel connected multiple reference resistance, which provides the averaging effect of the variations of device characteristics. This averaging effect renders the proposed TCAM to be variation-tolerant. Using 65-nm CMOS model parameters, the operation of the proposed TCAM has been evaluated including the Monte-Carlo simulated variations of the device characteristics, the supply voltage variation, and the temperature variation. With the tunneling magnetoresistance ratio (TMR) of 1.5 and all the variations being included, the error probability of the search operation is found to be smaller than 0.033-%.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.106-112
• /
• 2000

Since the oil crisis, we have been concerned about the energy saving techniques of electric generating systems. As a part of the effort to save energy, automatic electric load sharing device was developed. Usually, ship's electric generating system consists of two or three sets of generator. And, electric generating system is operated as single or parallel operation mode according to the demanded electric power. Therefore, it is important to investigate generators operating mode for the supply of required electric power in the ship in order to decrease the operating cost. So, this paper suggests the method to solve the optimal electric load distribution problem by dynamic programming. And, this thesis indicates that the proposed method is superior to the lagrange multiplier's method in obtaining optimal load distribution solution in the ship's electric generating system.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.530-535
• /
• 2004

We have studied 90$^{\circ}$ twisted nematic mode switching by fringe electric field(F-TN mode) using a liquid crystal (LC) with negative dielectric anisotropy. In the device, two polarizers are parallel each other, electrodes exist only on bottom substrate, and one of rubbing direction is coincident with polarizer axis. Therefore, the cell shows a black state before a voltage is applied. With a bias voltage generating fringe-electric field, the LC twists perpendicular to fringe electric field such that the LCs are almost homogeneously aligned except near the bottom surface since the negative type of the LC is used. Consequently, the new device exhibits much wider viewing angle than that of the conventional TN mode due to in-plane switching and relatively high transmittance since the LC director above whole electrode area aligns parallel to the polarizer axis.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.265-269
• /
• 2005

Surge protective devices can be divided into three categories based on the circuit assembly: a parallel circuit type that considers the surge current amount within the device, a series circuit type that considers the voltage and single circuit type that uses a single element. However, when assembling SPDs, there are many things including function and safety to be taken into consideration because they are directly related to the performance and safety of the device. In this paper, we executed an experimental comparative study of performance and thermal stability of each SPD type using lightning surge generator and thermal image camera.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.444-447
• /
• 2004

A heart diagnosis system adopts hundreds of Superconducting Quantum Interface Device(SQUID) sensors for precision MCG(Magnetocardiogram) or MEG(Magnetoencephalogram) signal acquisitions. This system requires correct and real-time data acquisition from the sensors in a required sampling interval, i.e., 1 mili-second. This paper presents our hardware design and test results, to acquire data from 256 channel analog signal with 1-ksample/sec speed, using 12-bit 8-channel ADC devices, SPI interfaces, parallel interfaces, and 8-bit microprocessors. We chose to implement parallel data transfer between microprocessors as an effective way of achieving such data collection. Our result concludes that the data collection can be done in 250 ${\mu}sec$ time-interval.