• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1662_1663
• /
• 2009

There are generator/turbine/boiler control system in the thermal power plant. By the way, the manufacturers are different each other in many cases. Therefore there were many difficulties in interface and maintenance of power plant. So, we have been developing the integration of all control system in a single manufacturer. Mill & burner control is analyzed in this paper.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.173-178
• /
• 1995

This paper presents a new method to obtain parameters of end-mill cutting system. For high speed milling and precision surface finish, we have to predict the deflection of tool and the critical depth of cut. The cutting system can be modeled to a vibratory system to obtain the deflection of tooll and the critical depth of cut. A new method of the modeling of one degree of freedom system was developed using bisection method, ARMA(Autoregressive Moving average) and impact test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.107.5-107
• /
• 2002

In this paper, a kinematic optimal design of a new paralleltype rolling mill based upon two Stewart platforms manipulator is investigated. The objective of this new parallel-type rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of the rolls, and tension of the strip. A manipulability measure, as the ratio of the manipulability ellipsoid volume and the condition number of a split Jacobian matrix, is defined. Two kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.25-29
• /
• 1998

One of the crucial problems that must be solved in a computerised unmanned machining environments requires the development of algorithm in order to predict the reliable cutting conditions on surface roughness. This paper is to develop the mathematical models for choosing the suitable cutting conditions and assist a comprehensive understanding of its machinability properties for cutting process by Ball End Mill. The mathematical equations developed to predict the surface results. It has been found that theoretical results obtained from the empirical equations agree with the experimental results of surface roughness.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.220-220
• /
• 2000

In this paper, some non-interaction problems in tandem cold rolling mill are considered, which are required to control effectively a thickness of the cold .oiled strip. First, Interstand non-interactive compensate. (Interstand NIC) is designed for decoupling the interaction between stands. Next, a L2 optimization based pre-compensator is designed for decoupling the interaction between roll gap and strip tension in the stand. Finally, the effectness of the proposed decoupling methods is demonstrated via simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3056-3059
• /
• 2000

This paper describes a fast image labeling algorithm for the feature extraction of connected components. Labeling the connected regions of a digitized image is a fundamental computation in image analysis and machine vision, with a large number of application that can be found in various literature. This algorithm is designed for the surface defect inspection of Cold Mill Strip. The labeling algorithm permits to separate all of the connected components appearing on the Cold Mill Strip.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1156-1161
• /
• 2006

This paper describes a fast image labeling algorithm for the feature extraction of connected components. Labeling the connected regions of a digitized image is a fundamental computation in image analysis and machine vision, with a large number of application that can be found in various literature. This algorithm is designed for the surface defect inspection of Cold Mill Strip. The labeling algorithm permits to separate all of the connected components appearing on the Cold Mill Strip.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.373-376
• /
• 2000

The modified Moonie(Cymbal) transducer has been investigated for an accelerometer application. This paper present a wind-mill type ultrasonic motors using ternary piezoelectric ceramics and aluminum endcaps applied by cymbal transducer. The maximum displacement was increased depend on applied voltage and layer number. The multi-layer was fabricated by tape casting using doctor-blade process. The maximum displacement of multi-layered ultrasonic motor was much higher than that of one-layered.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.85-92
• /
• 2014

The disposal of the paper mill sludge and the paper mill sludge ash become more important issue, because the environment regulation becomes more strict. In this study, the new mulching system was developed by using the paper sludge ash. The soil surface hardening mechanism for mulching with paper sludge ash, red clay and coal ash was evaluated. Since the CaO in the paper sludge ash provided the harden structure with water, the surface hardening mulching structure could cover the field surface and prevent the germination of weeds. More than 50 w.t.% of red clay and 10 w.t.% of paper sludge ash were required to create the solid soil surface structure for mulching. The field test with the new soil surface hardening mulching system for three months showed the generation of weeds could successfully be inhibited by the system.

• 환경위생공학
• /
• 제15권4호
• /
• pp.91-97
• /
• 2000

The objective of this study was to evaluate the possiblity of Foodwaste and co-treatment with other waste for vermistabilization. The value of oxidation-reduction potential(Eh) of the dewaterized foodwaste by a plant of subatmospheric evaporation was a possitive(+) value indicating, but the values of pH, salinity was idicating an unfavorable condition for earthworm life. The paper mill mixing waste properties by ripening for 20days were changed into the favorable range for earthworm. The growth of earthworms in foodwaste and mixing waste of paper mill 30% was found to be 68%, 84% for the survival rate, 227%, 275% for the liveweight increasing rate, respectively. The ingestion rate of foodwaste and mixing waste of paper mill 30% indicate 0.72g/g·d, 0.81g/g·d, respectively. About 62∼75% of ingestion amount produce cast and characteristics of cast indicate pH 6.1∼6.5 organic component 34∼42%, salinity 0.35∼0.4, CEC 73∼94 me/100g, N, P, K concentration 0.8∼1.2%, 0.4∼1.6%, 0.43∼0.5% respectively. Therefore it can be evaluated that the casts are good soil condition and organic fertilizer.