• 한국산업융합학회 논문집
• /
• 제16권4호
• /
• pp.119-125
• /
• 2013

To enhance the cutting performance of high speed steel(HSS) endmill, single and multilayer coating is applied on the substrated of the HSS endmill. Coating material reduces cutting force and enhances resistance against abrasive wear. This paper presents the physical vapour deposition(PVD) coating technology and evaluate the PVD coated HSS endmill. The performance of coated HSS endmills are fifteen times better than uncoated HSS endmill on proposed cutting conditions. The TiAlN monolayer coated endmills(futura nano coating) are better than those of multilayer coated endmills(futura coating) on machined surface and tool wear.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2064-2066
• /
• 1998

The development of the high-frequency induction-heating for 1800kW power range intend to make localization at forging and rolling mill part by technical innovation. And, the development makes to increase our's competitive power at technique, quality and cost. This paper describes the heart of high-frequency induction-heating technique, switching technique, a few problem in common using as an unsatisfied technique, load adjustment technique, system control, diagnostic system and auto-interface etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.325-329
• /
• 1994

This paper describes a compact design and control method of PWM inverter-mounted induction motor especially designed for reducing the size and weight considerably, which may be applied to the speed control system such as air conditionr,conveyor and textile mill, etc. To obtain higher power density without derating performance, a new mechanical configuration unifying the inverter circuit and motor is proposed. Also, through the use of current minimization control method during V/f operation it is possible to reduce the size of heat-sink related to the losses of power circuit. By the proposed design method, a compact inverter-mounted induction motor system of 1Hp is built and its validity can be verified through the experimental results.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.72-79
• /
• 2008

This paper designs a looper-tension controller for mass-flow stabilization in hot strip finishing mills. By Newton's 2nd law and Hooke's law, nonlinear dynamic equations on the looper-tension system are firstly derived, and linearized by a linearization algorithm using a Taylor's series expansion. Moreover, a tension calculation model is obtained from the nonlinear dynamic equations which is called as a soft sensor of strip tension between two neighboring stands. Next, a looper-tension servo controller is designed by an ILQ(Inverse Linear Quadratic optimal control) algorithm, and it is combined with a minimal disturbance observer which to attenuate speed disturbances by AGC and operator interventions, etc.. Finally, it is shown from by a computer simulation that the proposed ILQ controller with a disturbance observer is very effective in stabilizing the strip mass-flow under some disturbances, moreover it has a good command following performance.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2000년도 The 7th International Symposium
• /
• pp.52-63
• /
• 2000

Many plant species are used in China in traditional medicine for the prevention and treatment of cancer. This paper presents some of these species with details on other pharmacologic evaluation and its traditional Chinese meditional uses. The known bioaktivities and some chemical constituents of each of the species given. Information on bioactivities of each species resulting from tests on experimental animals are given. Many of the known chemical constituents of each species are given. Various species of plants elective for various types. In this meeting I will present on some antitumor of the plants which are as follows; (1) Akebia trifoliata(Thunb.)Koidz. ((2) Panax notoginseng(Burk.) F, H, Chen., (3) Ziziphus jujuba Mill., (4) coriolus versicolor(Fr.)Que l., (5) Trichosanthes kirilowii Maxim., (6) Ficus carica Linnaeus., (7) Acanthopanax senticosus(Rupr.et Maxim.)Harms., (8) Hibiscus mutabilis Linnaeus., (9) Arctium lappa Linnaeus., (11) Agrimonia pilosa Ledebour and (12) Hedyotis diffusa Willd.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.975-976
• /
• 2006

The present paper is a parameter study of zinc flake production using a Simoloyer CM01 horizontal high energy rotary ball mill. The manufactured flakes have a dimension in thickness (t) < $1{\mu}m$ and diameters (d) 5-100 ${\mu}m$, consequently a ratio d/t up to 200. The flake geometry is mainly controlled by the variation of process parameters such as rotary speed of the rotor, ratio of powder/ball charge, load ratio of the system, process temperature, operating model and the quantity of process control agent (PCA). The Zn flakes were characterized by SEM, tap densitometry, laser diffraction and water coverage measurement.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.191-196
• /
• 2008

This paper proposes a cooling stop temperature control(CSTC) concept which aims at obtaining the uniform temperature and quality of the material along the longitudinal and lateral direction of the strip. The CSTC is designed using the experimental CCT(Continuous Cooling Transformation), TTT(Time Temperature Transformation) curves and the temperature control model by the heat transfer governing equation, and the temperature control simulator. The cooling pattern and the rolling speed can be solved by the CSTC. It is shown through the field test of the hot strip mill of POSCO that the phase transformation ratio of the high carbon steel is considerably improved by the proposed temperature control.

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.382-387
• /
• 2011

In this paper, a LBCC (Latter Bank Cooling Control) for the high strength steel is proposed to obtain the desirable temperature and the property of the material along the longitudinal direction of the steel on the ROT (Run-Out Table) process. A cooling valve is modeled to analyze the response of the ROT banks. The control concept is derived from a field data, a valve model considering the valve response and a TTT (Time-Temperature Transformation) diagram. The proposed control is verified from the simulation results under the various carbon quantities. It is shown through the field test of the hot strip mill that the deviation of the CT (Coiling Temperature) is considerably decreased by the proposed temperature control.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.297-300
• /
• 2008

This paper described a New-Concept lightning warning system (LWS) which can measure electric field intensity on the ground level by an electric field mill (EFM) and calculate the lighting location by radiated electro-magnetic waveform. The EFM measures electric field up to 20[kV/m] with the sensitivity of 0.15[V/kV/m] and frequency bandwidth of the loop antenna was ranges from 5.2[kHz] to 1.71[MHz]. The LWS provides data on the movements of thunderclouds and the possibility of lightning return stroke.

• 융합보안논문지
• /
• 제10권1호
• /
• pp.19-27
• /
• 2010

오늘날 네트워크의 속도와 인터넷 기술의 발전과 동시에 윈도우 취약점을 통한 악성코드가 많이 발생하고 있다. 악성코드는 여러 감염 형태 벚 특성이 있어 바이러스 백선을 이용하여 탐지하기도 어려울 뿐만 아니라 제거하는 것도 쉽지 않다. 본 논문은 윈도우 악성코드의 분류와 특정을 분석하여 프로그램을 이용한 악성코드의 위치를 파악하고 신종 악성코드에 대한 신속한 대응을 위해 스크립트 기술을 제안한다.