Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

LBCC of Transient State for High Strength Steel in Hot Strip Mills

열연 고강도강의 비정상부 온도제어를 위한 LBCC 개발

  • 박철재 (대구대학교 기계자동차공학부) ;
  • 윤강섭 (대구대학교 기계자동차공학부)
  • Received : 2010.11.30
  • Accepted : 2011.01.17
  • Published : 2011.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a LBCC (Latter Bank Cooling Control) for the high strength steel is proposed to obtain the desirable temperature and the property of the material along the longitudinal direction of the steel on the ROT (Run-Out Table) process. A cooling valve is modeled to analyze the response of the ROT banks. The control concept is derived from a field data, a valve model considering the valve response and a TTT (Time-Temperature Transformation) diagram. The proposed control is verified from the simulation results under the various carbon quantities. It is shown through the field test of the hot strip mill that the deviation of the CT (Coiling Temperature) is considerably decreased by the proposed temperature control.

Keywords

References

  1. N. S. Samaras and M. A. Simaan, "Optimized trajectory tracking control of multistage dynamic metal-cooling processes," IEEE Transactions on Industry Applications, vol. 37, no. 3, pp. 920-927, 2001. https://doi.org/10.1109/28.924776
  2. A. G. Groch, R. Gubernat, and E. R. Birstein, "Automatic control of laminar flow cooling in continuous and reversing hot strip mills," Iron and Steel Engineer, vol. 67, no. 9, pp. 16-20, 1990.
  3. S. K. Biswas, S. Chen, and A. Satyanarayana, "Optimal temperature tracking for accelerated cooling processes in hot rolling of steel," Dynamics and Control, vol. 7, pp. 327-340, 1997. https://doi.org/10.1023/A:1008268310234
  4. R. K. Kumar, S. K. Sinha, and A. K. Lahiri, "An on-line parallel controller for the runout table of hot strip mills," IEEE Transactions on Control Systems Technology, vol. 9, no. 6, pp. 821-830, 2001. https://doi.org/10.1109/87.960345
  5. S. Guan, H. X. Li, and S. K. Tso, "Multivariable fuzzy supervisory control for the laminar cooling process of hot rolled slab," IEEE Transactions on Control Systems Technology, vol. 9, no. 2, pp. 348-356, 2001. https://doi.org/10.1109/87.911386
  6. G. V. Ditzhuijzen, "The controlled cooling of hot rolled strip: a combination of physical modeling, control problems and practical adaptation," IEEE Trans. on Automatic Control, vol. 38, no. 7, pp. 1060-1065, 1993. https://doi.org/10.1109/9.231460
  7. M. D. Leltholf and J. R. Dahm, "Model reference control of runout table cooling at LTV," Iron and Steel Eng., vol. 66, no. 8, pp. 31-35, 1989.
  8. N. S. Samaras and M. A. Simaan, "Water-cooled end-point boundary temperature control of hot strip via dynamic programming," IEEE Transactions on Industry Applications, vol. 34, no. 6, pp. 1335-1341, 1998. https://doi.org/10.1109/28.739019
  9. F. E. James et al., "Numerical modeling of hot strip mill runout table cooling," Iron Steel Eng., pp. 50-55, 1993.
  10. N. Hatta and H. Osakabe, "Numerical modeling for cooling process of a moving hot plate by a laminar water curtain," The Iron and Steel Institute of Japan, vol. 29, no. 11, pp. 919-925, 1989. https://doi.org/10.2355/isijinternational.29.919
  11. W. Timm, K. Weinzierl, A. Leipertz, H. Zieger, and G. Zouhar, "Modelling of heat transfer in hot strip mill runout table cooling," Steel Res., vol. 73, no.3, pp. 97-104, 2002.
  12. T. Oda, Y. Kondo, S. Konishi, H. Murakami, M. Suehiro, and T. Yabuta, "Development of accurate control in hot strip mill," The Iron and Steel Institute of Japan, vol. 81, no. 3, pp. 35-40, 1995.
  13. N. S. Samaras, "Novel control structure for runout table coiling temperature control," AISE Steel Tech., 2001.
  14. D. Auzinger and F. Parzer, "Process optimization for laminar cooling," MPT International, vol. 5, pp. 68-75, 1996.
  15. E. N. Hinrichsen and G. P. Petrus, "Hot strip mill runout table cooling: a system view of control, operation and equipment," Iron and Steel Eng., vol. 53, no. 10, pp. 29-34, 1976.