• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.620-623
• /
• 1996

POSCO has been developed a general purpose dynamic simulator of the hot strip steel mill. The simulator is a tool for developing the process control system in an industrial system solution business, by making the most use of control and simulation techniques fostered in steelmaking business. This simulator has, not only a powerful numerical analysis function, but an easy-to-use graphic user interface which readily enables to simulate dynamic system. This paper presents the features of the simulator and steel rolling process simulator as its application.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.525-530
• /
• 1992

This paper deals with an exit strip gauge controller design for a cold rolling mill process with one input and two outputs. In order to attenuate the exit strip gauge variation caused by the Back-up roll eccentricity and the entry guage variation, an H$_{\infty}$ controller design methodology is used to keep the frequency weighted mixed sensitivity function small. Effectiveness of the proposed controller is demonstrated by a computer simulation..

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.3
• /
• pp.210-217
• /
• 2009

This paper presents the analytical prediction of stability lobes in milling. The stability lobes are obtained by measuring the frequency response function (FRF) of a machining center at the cutting point of the end mill cutter, identifying cutting constants, and approximating cutting force coefficients. The stability lobes are experimentally verified through cutting tests.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.171-174
• /
• 1998

The development of the high-frequency induction-heating for 2700kW power range intend to make localization at forging and rolling mill part by technical innovation. And, the development makes to increase our's competitive power at technique, quality and cost. This paper describes the heart of high-frequency induction-heating technique, switching technique, a few problem in common using as an unsatisfied technique, load adjustment technique, system control, diagnostic system, and auto-interface etc.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.84-89
• /
• 2008

Twin screw mode LNG Carrier is appeared. Because LNG CARRIER is larger recently. In this paper introduces maneuvering characteristics of Twin screw LNG CARRIER on single screw mode, which are found when the non-using screw mode is fixed or not(wind mill).

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.123-134
• /
• 1995

In this paper, the fast force algorithm has been studied so that it is used to calculate cutting forces and to develope the NC verification system. The NC verification using the fast force algorithm can verify excessive cutting force which is the cause of deflection and breakage of tool, and adjust the feed rate and spindle speed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.04a
• /
• pp.117-126
• /
• 2004

This paper presents a linear model for heat transfer processes in the drying cylinders and the web in papar mill. The PDE model, functions include steam temperatures, wet temperatures, moisture constents, reel speed and basis weight were derived from operation data. The changes of wet temperatures and moisture contents in the drying cylinders and wets could be described. The Transfer function can be obtained through the state space model derived from the linearized PDE model. Stability of the drying cylinder model for paper plants and analysis of characteristics of process responses for changes in input variables are investigated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.38-44
• /
• 2001

The effects of refining load on the paper properties were investigated. HwBKP, SwBKP and SwUKP were refined with PFI mill at the load of 3.33 N/mm and 6.00 N/mm. Higher Scott bond was obtained at the higher refining load for three pulp used in this study. However any changes in the light scattering coefficient with the change of refining load were not observed. Although the effect of refining load on the formation index for SwUKP was not observed, higher refining load gave the better formation for HwBKP and SwBKP. The fiber mass and fiber crowding factor were not affected by the refining load. Higher apparent density and tensile index were obtained with the higher refining load. However, the higher refining load did not improve the tensile index at the same apparent density. The tear index was decreased with the increase of refining load.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.86-93
• /
• 2000

High Colored kraft bleaching effluent is one of the main constrains in pulp and paper industry due to its dissloved lignin derivatives. The degradation of lignin in pulp and paper mill effluent is mainly caused by white-rot fungi. This paper showed that the treatment with KS-62 fungus significantly reduced the color and chemical oxygen demand in the effluent. The amounts of Mn ions in the wastewater would play roles in the induction and activity of MnP (Managanese peroxidase). Extracellular MnP was isolated from the fungus KS-62. The treatment with the MnP had the most effective decolorizatiion in the wastewater treatment using nutrients mediu.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.