• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.293-293
• /
• 2010

Carbon nanotubes (CNTs) have attracted considerable attention as possible routes to device miniaturization due to their excellent mechanical, thermal, and electronic properties. These properties show great potential for devices such as field emission displays, CNT based transistors, and bio-sensors. The metals such as nickel, cobalt, gold, iron, platinum, and palladium are used as the catalysts for the CNT growth. In this study, diamond-like carbon (DLC) was used for CNT growth as a nonmetallic catalyst layer. DLC films were deposited by a radio frequency (RF) plasma-enhanced chemical vapor deposition (RF-PECVD) method with a mixture of methane and hydrogen gases. CNTs were synthesized by a hot filament plasma-enhanced chemical vapor deposition (HF-PECVD) method with ammonia (NH3) as a pretreatment gas and acetylene (C2H2) as a carbon source gas. The grown CNTs and the pretreated DLC filmswere observed using field emission scanning electron microscopy (FE-SEM) measurement, and the structure of the grown CNTs was analyzed by high resolution transmission scanning electron microscopy (HR-TEM). Also, using energy dispersive spectroscopy (EDS) measurement, we confirmed that only the carbon component remained on the substrate.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.675-679
• /
• 1999

An investigation was performed to prepare spherical cobalt powder with about particle size of 400nm from aqueous cobalt hydroxide slurry under hydrothermal reduction conditions using palladium chloride as a catalyst. The reduction kinetics was in good agreement with a surface reaction core model equation. and the activation energy obtained from Arrhenius plots was 55.6 KJ/mol at the temperature range of $145~195^{\circ}C$. Additionally, the study showed that the cobalt reduction rate is proportional to the initial hydrogen pressure with a reaction order of n=0.63. which corresponds to the gas chemisorption reaction type.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.128-128
• /
• 2017

무전해 도금이란 외부의 전원을 사용하지 않고 환원제를 이용하여 금속 피막을 석출시키는 방법이다. 이러한 무전해 도금은 최근에 와서 인쇄회로기판(printed circuit board)등 다양한 전자부품에 적용되고 있다. 최근 급격한 금 가격 상승으로 인해 전자부품용에 사용되는 금의 사용량을 감소시키거나 또는 금을 대체할 수 있는 도금 층에 관한 연구가 활발하게 진행되고 있다. 금을 대체할 수 있는 즉 비용 경감의 가능성이 있는 도금 재료로는 팔라듐이 유력하다. 팔라듐은 금의 약 1/2가격으로 우수한 내식성 및 낮은 접촉저항을 가지기 때문에 접점재료로서 오래전부터 사용되어져왔다. 무전해 팔라듐-인 도금의 착화제, 환원제, 경도, 접촉저항에 대한 연구는 많이 있지만 도금속도에 미치는 인자에 대해서는 명확하지 않은 것이 많다. 따라서 본 연구는 무전해 팔라듐-인 도금의 석출석도에 미치는 에틸렌디아민 농도의 영향에 대하여 조사하였다. 실험방법으로는 환원제로 차아인산을 사용하고 착화제로는 에틸렌디아민을 사용하여 문전해 팔라듐-인 도금액을 제조하였다. 에틸렌디아민의 농도는 각각 5ml/L, 7.5ml/L, 10ml/L, 12ml/L로 하였다. pH는 7.5, 온도는 $45^{\circ}C$로 하여 30분 동안 도금을 실시하였다. 무전해 팔라듐-인 도금속도는 정밀저울로 무게를 측정하였고 ICP-OES을 사용하여 도금층의 농도를 분석, XRF를 사용하여 성분분석과 XRD를 사용해 결정회절을 분석하였다. 또한 SEM을 사용하여 단면 관찰을 하였으며 석출속도에 미치는 에틸렌디아민의 영향을 전기화학 분극곡선을 통해서 고찰을 시도해 보았다.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.49-58
• /
• 2013

A selected halogenated organic contaminant, monochlorophenol was successfully degraded by photocatalytic reaction in a circulating batch system. The photocatalytic degradation in most cases follows first-order kinetics. The photocatalytic reaction rate increased in the $TiO_2$ dosage range of 0.1 g/L to 0.4 g/L, then decreased with further increase of the dosage. Also the degradation rate increased over the range of the retention time from 0.49 min. to 0.94 min., then decreased with further increase of the retention time in the circulating batch reactor. The photocatalytic activity was enhanced by addition of metal impurities, platinum(Pt) and palladium(Pd) onto the photocatalysts. The photocatalytic degradation rate increased with the increase of Pt and Pd in the content range of 0 to 2wt %, then decreased with further increase of the metal contents. Therefore the metal loading to $TiO_2$ influence the degradation rate of a halogenated organic compound by acting as electron traps, consequently reducing the electron/positive hole pair recombination rate.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.29-32
• /
• 2008

The cell performance of direct formic acid fuel cell (DFAFC) having catalysts coated by electrospray was analyzed. Pd catalyst was used for the anode electrode and Pd catalyst loading amount and formic acid feed rate dependances of fuel cell performance were evaluated. When loading amount of Pd is in between 3mg/$cm^2$ and 7mg/$cm^2$ and formic acid feed rate is 5ml/min., 3mg/$cm^2$ sample showed better potential at 129 mA/$cm^2$ and power density due to difference in mass transfer limitation. However, when the feed rate is greater than 10ml/min., the opposite tendency was observed between 3mg/$cm^2$ and 7mg/$cm^2$ samples. The result was attributed to improvement in electrochemical reaction of the Pd. Based on the above results, In DFAFC including Pd catalyst that was coated by electrospray, 0.537V as the maximum potential at 129 mA/$cm^2$ was attained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.207-207
• /
• 2011

Aromatic nitriles possess versatile utilities and are indispensible not only in organic synthesis but also in chemical industry. In fact, the nitrile group is an important precursor for various functional groups such as aldehydes, amines, amidines, tetrazoles, amides, and their carboxyl derivatives. Representative methods for the preparation of organonitriles with cyanide-containing reagents are the Sandmeyer and Rosenmund-von Braun reactions. Recently, a catalytic route to aryl nitriles has been reported on the basis of the chelation-assisted C-H bond activation or metal-catalyzed cyanation of haloarenes. In those cyanation protocols, the "CN" unit is provided from metal-bound precursors of MCN (M=Cu, K, Na, Zn), TMSCN, or K3Fe(CN)6. Additionally, it can be generated in situ from nitromethane or acetone cyanohydrin. Herein, we report the first example of generating "CN" from two different, readily available precursors, ammonia and N,N-dimethylformamide (DMF). In addition, its synthetic utility is demonstrated through the Pd-catalyzed cyanation of arene C-H bonds.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.3
• /
• pp.231-238
• /
• 2001

Electrocatalytic activity of palladium for hydrogen oxidation and reduction was studied using AC impedance method. The system under study was arranged in electrolytic mode consisting of Pd electrode under study, Pt counter electrode and Nafion electrolyte between them. Two types of Pd electrodes were used - carbon-supported Pd (Pd/C) and Pd foil electrode. Pd/C anode contacting pure hydrogen showed a steady decrease of charge transfer resistance with the increase of anodic overpotential, which is an opposite trend to that found with Pd foil anode. But Pd foil cathode also exhibited a decrease of the resistance with the increase of cathodic overpotential. The relationship between imposition of overpotential and subsequent change of the charge transfer resistance is determined by the ratio of the rate of faradaic process to the rate of mass transportation; if mass transfer limitation holds, increase of overpotential accompanies the increase of charge transfer resistance. Regardless of the physical type of Pd electrode, the anode contacting hydrogen/oxygen gas mixture did not reveal any independent arc originated from local anodic oxygen reduction.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.283-288
• /
• 2014

PdO-doped $BaZr_{0.85}Y_{0.15}O_{3-\delta}$ (BZPY) proton conductors have been proposed as applicable for intermediate temperature electrolytes for protonic ceramic fuel cells (PCFCs) because the PdO doping is effective for improving the proton conductivity of $BaZr_{0.85}Y_{0.15}O_{3-\delta}$ (BZY) with high affinity for hydrogen. In order to further improve the conductivity of BZPY, two-phase composite electrolytes consisting of a BZPY and molten carbonate were designed. Dense BZPY-based composite electrolytes were fabricated after sintering at $670^{\circ}C$ for 4 h, since molten carbonates fill the grain boundary of the porous BZPY matrix. Furthermore, BZPY/$(Li-0.5Na)_2CO_3$ composites show a significantly enhanced protonic conductivity at intermediate temperatures. This may be because easy proton transport is possible through the interface of the carbonate and oxide phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.55-60
• /
• 2006

Thermally stable and solution-processable poly(N-arylcarbazole-alt-aniline) copolymers with high structural integrity were synthesized in good yields via palladium-catalyzed polycondensation of aniline with corresponding N-arylcarbazole monomers such as N-(2-ethylhexyloxyphenyl)-3,6-dibromocarbazole,bis[6-bromo-N-(2-ethylhexyloxyphenyl)carbazole-3-yl] and N-(4-(2-ethylhexyl)-3,5-dibromomethylene-phenyl) carbazole, respectively. The optical and electrochemical properties of these copolymers were measured and compared with those of poly(N-alkylcarbazole-alt-aniline) copolymer. All synthesized poly(N-arylcarbazole-alt-aniline) copolymers showed maximum UV-Vis absorption peaks at around 300 nm in THF solution, and exhibited maximum photoluminescence peaks in the blue emission range from 430 to 460 nm. It was also found that poly(N-arylcarbazole-alt-aniline) copolymers had wider band gap energy than poly(N-alkylcarbazole-alt-aniline) copolymer.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.491-498
• /
• 2005

Fluorene-containing, spiro-type, conjugated polymers were synthesized via the cyclopolymerization of dipropargylfluorenes (2-substituted, X=H, Br, Ac, $ NO_{2}$) with various transition metal catalysts. The polymerization of dipropargylfluorenes proceeded well using Mo-based catalysts to give a high polymer yield. The catalytic activities of the Mo-based catalysts were found to be more effective than those of W-based catalysts. The palladium (II) chloride also increased the polymer yield of the polymerization. The polymer structure of poly(dipropargylfluorene)s was characterized by such instrumental methods as NMR ($^{1}H_{-}$, $^{13}C_{-}$), IR, UV-visible spectroscopies, and elemental analysis as having the conjugated polymer backbone bearing fluorene moieties. The $^{13}C_{-}$NMR spectral data on the quaternary carbon atoms in polymers indicated that the conjugated cyclopolymers have the six-membered rings majorly. The poly(dipropargylfluorene) derivatives were completely soluble in halogenated and aromatic hydrocarbons such as methylene chloride, chloroform, benzene, toluene, and chlorobenzene. The poly(dipropargylfluorene) derivatives were thermally more stable than poly(dipropargylfluorene) itself, and X-ray diffraction analyses revealed that the polymers are mostly amorphous. The photoluminescence peaks of the polymers were observed at about 457-491 nm, depending on the substituents of fluorene moieties.