• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.189-196
• /
• 2003

In this study, the vertical opening of the non-float midwater pair trawl net was maintained by controlling the length of upper warp. This was because the head rope was able to be kept linearly and the working depth was not nearly as changed with the variation of flow speed as former experiments in this series of studies have demonstrated. We confirmed that the opening efficiency of the non-float midwater pair trawl net was able to be developed according to the increase in front weight and wing-end weight. In this study, we described the opening efficiency of the non-float midwater pair trawl net according to the variation of front weight and wing-end weight obtained by model experiment in circulation water channel. We compared the opening efficiency of the proto type with that of the non-float type. The results obtained can be summarized as follows：1. The hydrodynamic resistance was almost increased linearly in proportion to the flow speed and was increased in accordance with the increase in front weight and wing-end weight. The increasing rate of hydrodynamic resistance was displayed as an increasing tendency in accordance with the increase in flow speed. 2. The net height of the non-float type was almost decreased linearly in accordance with the increase in flow speed. As the reduced rate of the net height of the non-float type was smaller than that of the net height of the proto type against increase of flow speed, the net height of the non-float type was bigger than that of the proto type over 4.0 knot. The net width of the non-float type was about 10 m bigger than that of the proto type and the change rate of net width varied by no more than 2 m according to the variation of the front weight and wing-end weight. 3. The mouth area of the non-float type was maximized at 1.75 ton of the front weight and 1.11 ton of the wing-end weight, and was smaller than that of the proto type at 2.0∼3.0 knot, but was bigger than that of the proto type at 4.0∼5.0 knot. 4. The filtering volume was maximized at 3.0 knot in the proto type and at 4.0 knot in the non-float type. The optimal front weight was 1.40 ton.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.125-131
• /
• 1979

A method for calculation of two center overlap integrals for a pair of Slater type orbitals was developed by Mulliken et al. In this method the spherical polar coordinates for a pair of Slater type orbitals located at two different points are required to be transformed into a spheroidal coordinate set for calculation of two center overlap integrals. A new method, the expansion method for spherical harmonics, in which Slater type orbitals, located at two different points, are expressed in a common coordinate system has been applied for computation of two center overlap integrals. The new method for computation of two center overlap integrals is required to translate Slater type orbitals centered at two different points into the reference point for computation of two center overlap integrals. This work has been expanded the expansion method for spherical harmonics for computation of two center overlap integrals to $|3s{\g}$, $|5s{\g}$ and $|5s{\g}$. Master formulas for two center overlap integrals are derived for these orbitals, using the general expansion formulas. The numerical values of the two center overlap integrals evaluated for a hypothetical NO molecule are in agreement with those of the previous works.

• Korean Journal of Mathematics
• /
• v.27 no.4
• /
• pp.899-927
• /
• 2019

In this paper we establish some results depending on the comparative growth properties of composite entire and meromorphic functions using relative (p, q)-th order and relative (p, q)-th lower order where p, q are any two positive integers and that of a special type of differential polynomial generated by one of the factors.

• The Pure and Applied Mathematics
• /
• v.27 no.3
• /
• pp.109-124
• /
• 2020

We establish coincidence point theorem for S-non-decreasing mappings under Geraghty-type contraction on partially ordered metric spaces. With the help of obtain result, we derive two dimensional results for generalized compatible pair of mappings F, G : X² → X. As an application, we obtain the solution of integral equation and also give an example to show the usefulness of our results. Our results improve, sharpen, enrich and generalize various known results.

• Honam Mathematical Journal
• /
• v.29 no.3
• /
• pp.341-350
• /
• 2007

A dynamical system with a skew-commuting involution map is called a flip system. Every flip system on a subshift of finite type is represented by a pair of matrices, one of which is a permutation matrix. The transposition number of this permutation matrix is studied. We define an invariant, called the flip number, that measures the complexity of a flip system, and prove some results on it. More properties of flips on subshifts of finite type with symmetric adjacency matrices are investigated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.619-622
• /
• 2006

A printed Tee-type monopole antenna loaded by a pair of L-type slots is studied. The effects of position, width, and length of loaded slots on frequency bandwidth of the antenna are examined. As an examples, a compact dual band monopole antenna is designed for the ISM band $[2.4\sim2.48GHz,\;5.15\sim5.35GHz,\;and\;5.725\sim5.85GHz]$ use and the characteristics of the constructed antenna are studied experimentally.

• Communications of the Korean Mathematical Society
• /
• v.31 no.4
• /
• pp.745-764
• /
• 2016

The object of the present paper is to obtain new estimates about the (p, q)-th lower order and (p, q)-th weak type of entire functions under some interesting conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.52-59
• /
• 2001

The photoluminescence and the photo-current from p-type GaN films were investigated on both room- and low-temperatures for various Mg doping concentrations. At a low Mg doping level, there exists a photoluminescence center of the donor and the acceptor pair transition of the 3.28-eV band. This center is correlated with the defects for a shallow donor of the VGa and for an acceptor of MgGa. The acceptor level shows the binding energy of 0.2-0.25 eV, which was observed by the photon energy of the photo-current signal of 3.02-3.31 eV. At a high Mg doping level, there is a photoluminescence center of a deep donor and an acceptor pair transition of the 2.76-eV blue band. This center is attributed to the defect structures of MgGa-VN for the deep donor and MgGa for the acceptor. For low. doped samples, thermal annealing provides an additional photo-current signal for an unoccupied deep acceptor levels of 0.87-1.35 eV above valence band, indicating the p-type activation.

• Cross-Cultural Studies
• /
• v.50
• /
• pp.425-451
• /
• 2018

In this paper, we examined the issues of the discussions on the subject of doublets. In general, as a definition, the use of doublets refer to a pair of words which have a common etymon, but also to a pair of words or grammatical morphemes that have the same meaning and similar forms of the word. In this paper, we have seen that a typical pairing word is a pair of words with a common etymology. Generally speaking, it is possible to divide doublets into subtypes depending on the identified similarities or differences in the meaning or form. The most distant type from the typical type of doublets is a pair of words that do not have a common etymon, but have the same meaning and are similar in form. The second issue about doublets is whether doublets include only words. For example, if some josas (postpositions or particles) have a common etymon, then it is noted that they can be accepted as a kind of doublets. In the case of suffixes, it may be possible to recognize the suffixes as doublets if they have a common etymon. In other words, it is not necessary to recognize the suffixes as doublets because the derivatives which are derived by the suffixes can be accepted as doublets. In the case of endings, it may be possible to recognize a pair of endings which have the same meaning and the common etymon as a doublet. Otherwise, the word forms to which the endings are combined can be accepted likewise as doublets. However, considering the fact that the endings typically in use in the Korean language may have syntactic properties, the endings should be considered as doublets rather than the words which have the endings. Finally, we conclude that there may be some debate as to whether stem doublets or ending doublets belong to a lexical item in the lexicon. It can be said that they are plural underlying forms and may be deserving of further research.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.11
• /
• pp.925-936
• /
• 2003

The manipulability analysis of the parallel-type rolling mill proposed in Hong et al. [1] is re-visited. The parallel rolling mill uses two Stewart platforms in opposite direction for the generation of 6 degree-of-freedom motions of each roll. The objective of this new parallel rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of rolls, and tension of the strip. New forward/inverse kinematics problems, in contrast with [1], are formulated. The forward kinematics problem is defined as the problem of finding the roll-gap and the pair-crossing angle of two work rolls for given lengths of twelve legs. On the other hand, the inverse kinematics problem is defined as the problem of finding the lengths of twelve legs when the roll-gap, the pair-crossing angle, and the position and orientation of one work roll are given. The method of manipulability analysis used in this paper follows the spirit of [1]. But, because the rolling force and moment exerted from both upper and lower rolls have been included in the manipulability analysis, more accurate results than the use of a single platform can be achieved. Two. kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.