• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.2
• /
• pp.156-161
• /
• 1997

In this thesis, based on Genetic Algorithm, a new route search algorithm is presented to search an optimal route between the origin and the destination in intelligent route guidance systems in order to minimize the route traveling time. The proposed algorithm is effectively employed to complex road networks which have diverse turn constrains, time-delay constraints due to cross signals, and stochastic traffic volume. The algorithm is also shown to significantly promote search efficiency by changing the population size of path individuals that exist in each generation through the concept of age and lifetime to each path individual. A virtual road-traffic network with various turn constraints and traffic volume is simulated, where the suggested algorithm promptly produces not only an optimal route to minimize the route cost but also the estimated travel time for any pair of the origin and the destination, while effectively avoiding turn constraints and traffic jam.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.46-49
• /
• 2014

본 논문에서는 4개의 스피커를 이용한 음향 재생 환경에서 청취자의 위치에 따라 최적의 sweet spot을 제공하도록 스피커를 구동하는 방법을 제안한다. 먼저 청취자 위치에 대하여 대칭 구조를 가지는 스피커 쌍(pair) 후보들을 선택한다. 다음, ringing 현상을 감소시키기 위하여 앞에서 선택한 스피커 쌍 후보 중에서 스피커 간 간격이 가장 먼 스피커 쌍과 이 스피커 쌍 사이에 있는 모든 스피커를 구동 스피커로 결정한다. 마지막으로, cross-talk cancellation 행렬의 크기를 제한하여 ringing 현상을 감소시킨다. 모의실험을 통해, 청취자 위치가 변할 때 제안하는 스피커 구동 방법을 사용하여 sweet spot 면적이 일정한 수준으로 유지되어 기존 방법에 비하여 성능이 향상된 것을 확인하였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.1
• /
• pp.101-105
• /
• 2004

A number of Chinese, Japanese and European silkworm strains with coarse size filament were used for breeding the coarse size variety. Through cross breeding combined with pedigree selection within thirteen generations, a pair of coarse size silkworm variety, named ${CU_1}{\times}{CU_2}$, was obtained after five years. Laboratory trials showed that the filament size of its 4F_1$ hybrid was over 4.3 D, and the other economic characters were also good.

• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.146-150
• /
• 2008

In order to study cortical properties in human, it is necessary to obtain an accurate and explicit representation of the cortical surface in individual subjects. Among many approaches, surface-based method that reconstructs a 3-D model from contour lines on cross-section images is widely used. The conventional method detects match points of contours using the minimum straight distance between any pair of contour points which lie on different contours. Then, it generates a triangle strip. In general, however, it might yield small mismatches between contours in case of brain due to complex anatomical structures. In this paper, therefore, we present an improved method for tilting operation that uses the curvature values calculated from surface information. The usefulness of the proposed method has been verified using brain image.

• Korean Journal of Animal Reproduction
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1988

In order to investigate the spermiogenesis of the Korean Native Jin-do dog, the tissue sampled from the testis and the epididymis of matured dog were conventionally prepared as thin sections. And then these sections were observed under a transmission electron microscope. Based on the development of various permanent organelle and certain transient structures, the spermiogenesis of the dog could be divided into four major phases: Golgi, cap, acrosome and maturation; and these phases had been futher subdivided into seven stages. In the maturatin phase, the karyoplasm has been condensed completely and the nucleus eleongated as the movement of the unclear ring. The equatorial segment has notable waist-form at the late acrosomal stage. In the cross section of the tail, it shows a typicl 9＋9＋2 pattern of the axial fiber bundle condisting of the dense fibers, the inner fibers, and a central pair. The dense fiber number 1, 5, 6, and 9 were larger in diameter than the rest of the dense fibers.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.161-170
• /
• 2006

Bender elements, composed of thin piezo-ceramics and elastic shims, have been used to measure shear wave velocities of specimens in laboratories. In a preliminary stage of their field applications, an in-house research of optimizing suitable bender elements and geometrical arrangement has been carried out in a barrel of kaolinite-water mixture. Two types of measurement configuration, similar to cross-hole and in-hole seismic testing, has been implemented. A pair of prototype instrumented rods was penetrated into a soft clay layer in the west coast and excellent shear waves were recorded. Development of penetration device(mandrel) and associated instrumented rods are in progress for deeper investigation.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.413-414
• /
• 2008

A 2.4 GHz low phase noise fully integrated LC voltage-controlled oscillator (VCO) in $0.18\;{\mu}m$ CMOS technology is presented in this paper. The VCO is optimized based on phase noise reduction. The design of the VCO uses differential varactors which are adopted for symmetry of the circuit, and consider AM-PM conversion due to a cross-coupled pair. The VCO is designed to draw 3 mA from 1.8 V supply voltage. Simulated phase noise is -137.3 dBc/Hz at 3 MHz offset. The tuning range is found to be 300 MHz range from 2.3 GHz to 2.6 GHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.175.2-175
• /
• 2001

The strip profile and shape control is one of the most important technologies in Hot Rolling Mill System. Because the unbalance of strip´s shape and wave appearance between stands has a bad effect on Hot Rolling Mill System by making the inferior thickness, strip´s damage and so forth in factories. Many competition Plate Mill introduced shape control system, for example, pair cross-mill, work roll bender, which includes shape measuring instruments and shape control mathematical models. Shape meter, which is equipped for flatness, only does feedback control at the top of coil. And, for crown, we depend on initial setup value and there is no feedback control. Therefore we predict the shape of strip using rolling pressure, bender force and tension of inter-stand in ...

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.145-148
• /
• 2002

In this paper, a voltage controlled oscillator (VCO) with automatic amplitude control is designed using a 0.35${\mu}{\textrm}{m}$ CMOS process. A cross-coupled PMOS pair is used for a negative resistance to compensate for the losses in the LC resonator, and an automatic\ulcorner amplitude control function is adapted to provide constant output power independent of the Q-factor of the LC resonator. The designed VCO operates in the 200MHz to 550MHz frequency range using different external resonators. The simulated phase noise is -128 dBc/Hz at 100KHz offset from the carrier frequency of 260MHz. It dissipates 0.㎽ from a 3V power supply. The area is 300${\mu}{\textrm}{m}$ x1201${\mu}{\textrm}{m}$.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.1011-1015
• /
• 2003

The objectives of this work focus on the differences in responses of paired tendons from different anatomical locations. Tendon specimens were obtained from the hindlimbs of canines and frozen to -70$^{\circ}C$. After being thawed, specimens were mounted in the immersion bath, preloaded to 0.13N, and then subjected to 3% or 4% of the initial length at a strain rate of 5%/sec. It was found that the mechanical responses of anatomically paired tendons were nearly the same within each pair but different between pairs of tendons from different anatomical locations. Although flexor tendons had much larger cross-sectional area than the others, such as peroneus or extensor tendons, the stiffness of the flexor tendons were much lower than the others throughout their stress-strain responses. The nature and causes of these differences in the stiffness are not fully known. However, it is clear that differences in the mechanical response of tendons and other connective tissues are significant to the musculoskeletal performance.