• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.19-23
• /
• 2015

본 연구에서는 COG (Chip On Glass) 패키지 적용을 위해 Au 범프를 전기도금 공정을 사용하여 Al/Si wafer와 SiN/Si wafer 위에 TiW/Au 구조를 갖는 두 종류의 Au범프 시료를 제작하였다. UBM (Under Bump Metallurgy) 물질로서 TiW 박막을 스퍼터링 방법으로 증착하였으며 스퍼터링 입력 파워(500~5000 Watt)에 따른 박리 현상을 관찰하였다. 안정된 계면 접착을 나타내는 스퍼터링 파워는 1500 Watt임을 확인 할 수 있었다. 또한 SAICAS (Surface And Interfacial Cutting Analysis System) 장비를 사용하여 기판 종류에 따른 Au Bump의 접착력을 조사하였다. TiW 증착 조건은 스퍼터링 파워를 1500 Watt로 고정하였다. TiW/Au 계면의 접착력은 두 종류의 wafer (Al/Si과 SiN/Si wafers)에 관계없이 오차 범위 안에서 비슷한 접착력을 보여주었으나, TiW UBM 스퍼터링 박막 계면에서의 접착력은 하부 박막인 Al 금속과 SiN 비금속 박막에서의 접착력 차이가 약 2.2배 크게 나타났다. 즉, Al/Si wafer와 SiN/Si wafer위에 증착된 TiW의 접착력은 각각 0.475 kN/m와 0.093 kN/m 값을 나타내었다.

• BMB Reports
• /
• 제42권4호
• /
• pp.227-231
• /
• 2009

The eukaryotic genome forms a chromatin structure that contains repeating nucleosome structures. Nucleosome packaging is regulated by chromatin remodeling factors such as histone chaperones. The Saccharomyces cerevisiae H3/H4 histone chaperones, CAF-1 and Asf1, regulate DNA replication and chromatin assembly. CAF-1 function is largely restricted to non-transcriptional processes in heterochromatin, whereas Asf1 regulates transcription together with another H3/H4 chaperone, HIR. This study examined the role of the yeast H3/H4 histone chaperones, Asf1, HIR, and CAF-1 in chromatin dynamics during transcription. Unexpectedly, CAF-1 was recruited to the actively transcribed region in a similar way to HIR and Asf1. In addition, the three histone chaperones genetically interacted with Set2-dependent H3 K36 methylation. Similar to histone chaperones, Set2 was required for tolerance to excess histone H3 but not to excess H2A, suggesting that CAF-1, Asf1, HIR, and Set2 function in a related pathway and target chromatin during transcription.

• Journal of Microbiology and Biotechnology
• /
• 제16권6호
• /
• pp.939-945
• /
• 2006

The physiological characteristics and function of the exopolysaccharide (EPS) produced by Lactobacillus rhamnosus ATCC 9595 were determined. The total quantity of EPS was rapidly increased to 496$\pm$20 mg/l during the exponential phase, and then maintained steadily during the stationary phase. During the exponential phase (18 h), the total EPS consisted of 61% cell-bound EPS (cb-EPS) and 39% released EPS (r-EPS), whereas the relative proportion of EPS during the stationary phase (48 h) was convered to 23% cb-EPS and 77% r-EPS. On gel permeation chromatography, cb-EPS was fractionated as a single peak of 8.6$\times10^6$ Da, whereas r-EPS was fractionated as two peaks with average molecular weights of 4.3$\times$10$^4$ and 8.6$\times10^6$ Da. Interestingly, both EPS species exhibited anticancer properties and cholera toxin-binding activities. Our results suggest that the EPS generated by L. rhamnosus ATCC 9595 might be suitable for use as a functional food or food supplement.

• 한국식품영양과학회지
• /
• 제40권8호
• /
• pp.1141-1149
• /
• 2011

현재 급식 외식 업체용으로 유통되고 있는 절단 세척된 신선편이 엽채류 및 조미채소류에 대하여 저장온도와 포장 방법에 따른 미생물학적, 물리, 화학적인 품질변화와 저장 중 변화되는 외관변화를 연구하였다. 본 연구의 대상인 엽채류 및 조미채소류의 품질변화는 신선편이의 농산물의 종류와 온도, 저장기간에 따라 수분함량, 색도, pH 등의 변화에 차이를 보였으며, 특히 10$^{\circ}C$에 저장한 품목들의 변화량이 컸다. 저장온도에 따른 미생물변화에 대한 품질변화 결과, 대장균의 경우 온도에 상관없이 저장기간 동안 검출되지 않았으나 총균수와 대장균군의 경우 4$^{\circ}C$에서 저장하는 동안 대체적으로 낮은 수준으로 유지할 수 있었으며, 10$^{\circ}C$에 저장한 엽채류의 경우 조직의 물러짐이 빠르게 나타나고 형태의 변화가 가속화되어 총균수와 대장균군의 증식이 조미채소류보다 빠른 것을 확인할 수 있었다. 온도에 따른 외관 품질의 변화결과에서는 4$^{\circ}C$에 저장한 것이 물러짐, 흑변현상, 갈변과 황화현상 등이 완만하게 발생하거나 저해되는 경향을 보였고, 10$^{\circ}C$의 경우 호흡률에 의한 진공 풀림, 색 변화 및 이취가 발생함에 따라 4$^{\circ}C$에 비해 품질유지기한이 짧게 나타났다. 그리고 대체로 조미채소류와 엽채류 모두 4$^{\circ}C$에 저장한 것이 10$^{\circ}C$에 저장하는 것보다 최대 3~5일까지 품질을 더 오래 유지할 수 있었다. 포장방법을 달리한 깻잎과 부추의 경우 기공에 따른 대장균과 총균수의 증식 차이는 보이지 않았으며, 포장지의 기공에 의하여 수분의 증발현상이 나타났고, 이에 따라서 수분함량이 감소하고 외관의 변화가 심하게 나타나, 품목에 따른 포장방법에 차이를 두어야 함을 확인할 수 있었다. 따라서 신선편이 농산물은 품목에 따라 저장온도와 포장방법이 품질에 영향을 미치므로 적절한 저장 온도와 포장방법을 유지한다면 품질과 안전성을 동시에 확보하여 품질유지기한을 연장할 수 있으리라 사료된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.631-636
• /
• 2009

This paper presents design and analysis of ultrasonic vibrator featuring the piezoelectric actuator. After describing a geometric configuration of the proposed vibrator, an analytical model of the ultrasonic vibrator is formulated by adopting liquid film pattern theory and wave theory. The dynamic analysis and geometric optimization are then undertaken using a software ANSYS. The optimization is performed by taking the amplitude of the tip displacement as an objective function. The fluid flow characteristics of the proposed vibrator are analyzed by taking three different fluids: water, silicon oil and ethylene-glycol. This is achieved using a software FLUENT.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.233-243
• /
• 2013

As companies were concerned with developing green logistics and environment, most logistics concerned functions like packaging, loading, storage, transportation and IT studies are active in study. Even if active in research studies, companies still recognized that logistics cost increases as green concepts are applied. For the efficient execution of green logistics management, it is absolutely necessary but difficult to build an optimal logistics system where each function is smoothly interacted through the proper integration and the link of various logistics functions and partners. This study aims to development of green logistics through integration of supply chain functions and partners. With this aim of study, case studies with analysis of embodiment, planning and operations for supply chain of companies are carried out.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권1호
• /
• pp.1-6
• /
• 2000

This paper presents a control of active suspension for quarter car model with two degree of freedom by using H$\infty$ method. Absolute velocity of car body is measured for feedback. The system parameter variations are treated with multiplicative uncertainty model. Simulation results show that the H$\infty$ control provides good trade-off between ride quality, suspension packaging and road holding constraints. The experiment with a front wheel suspension system was done to verify the simulation results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권2호
• /
• pp.153-158
• /
• 2016

The elastic material constants, stiffness constants ($c_{11}$, $c_{12}$, and $c_{44}$), are three unique coefficients that establish the relation between stress and strain. Accurate knowledge of mechanical properties and the stiffness coefficients for silicon is required for design of Micro-Electro-Mechanical Systems (MEMS) devices for proper modeling of stress and strain in electronic packaging. In this work, the stiffness coefficients for silicon as a function of temperature from $-150^{\circ}C$ to $+25^{\circ}C$ have been extracted by using the experimental measurements of Poisson's ratio (${\nu}$) of silicon in several directions.

• 한국세라믹학회지
• /
• 제56권6호
• /
• pp.601-605
• /
• 2019

This work reports the preparation of ceramic hybrid films with illite-polyethylene composites analyzed as a function of concentration of added illite in polyethylene. The enhancement of oxygen and water-vapor transmission rate of illite-polyethylene film was evaluated to determine its influence on the freshness in fruit packaging. Particle size of illite materials was controlled in the range of 1~10 ㎛ and then mixed with LDPE to form the masterbatch. Ceramic hybrid films were prepared through a blown film making process. To determine the dispersity and abundancy of illite materials in the polyethylene matrix, various characterizations of illite-PE hybrid masterbatch and films were performed using SEM, TGA, and FT-IR. The oxygen and water-vapor transmission rate of illite-polyethylene film was found to be two times higher than that of LDPE film.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1266-1272
• /
• 2003

This paper presents a new class of magnetic microsensors based on the Hall effect in AC microplasma. In the theoretical study, we develop a simple model of the plasma Hall sensor and express the plasma Hall voltage as a function of magnetic field, plasma discharge field, pressure, and electrode geometry. On this basis, we have designed and fabricated magnetic microsensors using AC neon plasma. In the experiment, we have measured the Hall voltage output of the plasma microsensors for varying five different conditions, including the frequency and the magnitude of magnetic field, the frequency and the magnitude of plasma discharge voltage, and the neon pressure. The fabricated magnetic microsensors show a magnetic field sensitivity of 8.87${\pm}$0.18㎷/G with 4.48% nonlinearity.