• Journal of Veterinary Science
• /
• v.25 no.3
• /
• pp.37.1-37.10
• /
• 2024

Importance: The portal vein to aorta (PV/Ao) ratio is used to assess the clinical significance of extrahepatic portosystemic shunt (EHPSS). Previous studies using computed tomography (CT) were conducted in dogs but not in cats. Objective: This study aimed to establish normal reference values for PV indices (PV/Ao ratio and PV diameter) in cats and determine the usefulness of these for predicting symptomatic EHPSS. Methods: This study included 95 dogs and 114 cats that underwent abdominal CT. The canine normal (CN) group included dogs without EHPSS. The cats were classified into feline normal (FN, 88/114), feline asymptomatic (FA, 16/114), and feline symptomatic (FS, 10/114) groups. The PV and Ao diameters were measured in axial cross-sections. Results: The group FN had a higher PV/Ao ratio than the group CN (p < 0.001). Within the feline groups, the PV indices were in the order FN > FA > FS (both p < 0.001). The mean PV diameter and PV/Ao ratio for group FN were 5.23±0.77 mm and 1.46±0.19, respectively. The cutoff values between groups FN and FS were 4.115 mm for PV diameter (sensitivity, 100%; specificity, 97.7%) and 1.170 for PV/Ao ratio (90%, 92.1%). The cutoff values between group FA and FS were 3.835 mm (90%, 93.8%) and 1.010 (70%, 100%), respectively. Conclusions and Relevance: The results demonstrated significant differences in PV indices between dogs and cats. In cats, the PV/Ao ratio demonstrated high diagnostic performance for symptomatic EHPSS. The PV diameter also performed well, in contrast to dogs.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.428-434
• /
• 2023

Pulmonary veins (PVs) and their myocardial sleeves play an important role in the development of atrial fibrillation. Hence, detailed knowledge of PV anatomy is required to improve the procedural success rate and prevent complications during cardiac procedures. The aim of this study was to evaluate the PV anatomy along with anatomical variations in the Indian population. Total 100 formalin fixed cadaveric hearts were examined. The number and pattern of the PVs were observed along with the measurement of their horizontal and vertical diameters. The ovality index for each PV was calculated. Classical PV pattern was observed in 62% cases. Variant pattern like additional right middle PV pattern and left common PV pattern were found in 20% and 10% cases respectively. A separate pattern with presence of both right middle PV and left common PV was observed in 6% cases. In the classical pattern right superior PV was the largest followed by right inferior, left superior and left inferior PV. The additional right middle PV had the smallest diameter whereas the left common PV had the largest diameter. Almost all the veins had greater vertical diameters in comparison to horizontal diameters. The variant PVs were oval and had greater ovality index compared to the normal PVs. In classical pattern 54.8% hearts whereas in variant pattern 79% hearts had one or more oval PV. The given data can help clinicians for planning and execution of various interventional and electrophysiological procedures involving PVs.

• Korean Journal Plant Pathology
• /
• v.10 no.1
• /
• pp.13-17
• /
• 1994

A semiselective agar medium (XCO) was developed for the isolation of bacterial blight pathogen, Xanthomonas campestris pv. oryzae, from rice seed. The medium contained yeast extract 1.0 g, peptone 2.0 g, sucrose 5.0 g, sodium glutamate 1.0 g, FeSO4.7H2O 0.05 g, Fe.EDTA 1 mg, cephalexin 20 mg, Evan blue (0.1%) 1.5 ml, bromcresol purple (0.1%) 2.5ml, cycloheximide 100 mg and agar 15.0 g per liter. Colonies of X. c. pv. oryzae were 4~5 mm in diameter, smooth, round, blue (darker center) and convex after 6 days incubation at 28$^{\circ}C$. The recovery of 6 isolates of X. c. pv. oryzae on the XOC medium ranged from 81% to 120% (mean 98.2%) in comparison to Wakimoto's medium. The number of saprophytic bacteria from 10 rice seed lots on XCO medium was reduced to 70.4% of that on Wakimoto's medium. The recovery of X. c. pv. oryzae added to rice seed on XOC medium ranged from 67% to 87% (mean 75.6%) of that on Wakimoto's medium.

• The Plant Pathology Journal
• /
• v.22 no.4
• /
• pp.314-317
• /
• 2006

A phage technique for detection of Xanthomonas axonopodis pv. citri, a causal bacterium of canker on Sastuma mandarin fruits was developed. Phage and ELISA techniques were compared for their sensitivity for detection of Xanthomonas axonopodis pv. citri on orange fruits. Both of techniques revealed a similar efficiency for the bacterial detection; the pathogenic bacteria were observed in pellet from the fruits with over one canker spot with below 2 mm in diameter. In field assays, the increase of phage population(120%) on surface of the fruits related to the disease development one month later indicated that the bacterial pathogens inhabit on the surface. The procedure will be effectively used for detection of only living bacterial pathogen on fruit surfaces of Satsuma mandarin and for the disease forecasting.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.182-189
• /
• 2005

This research was conducted to determine physical properties of four root media, peatmoss + vermiculite (1:1, v/v; PV), peatmoss + composted rice hall (1:1, PR), peatmoss + composted saw-dust (1:1 : PS) and peatmoss + composted pine bark (1:1 PB), as influenced by incorporation rate of Stock-sorb C (STSB). Each root medium containing STSB was packed in 22 cm diameter plastic pot and the physical properties were determined at 5 weeks after packing. As incorporation rate of STSB were elevated, total porosity increased in PV, PS and PB media with statistical differences at $5{\%}$ level. Those also resulted in increase of container capacity in PS and PB media, but statistical differences were not observed in PV and PR media. Elevated incorporation rate of STSB in PV, PS and PB media resulted in increase of air space with statistical differences. Trends in air space of the three root media showed a linear as well as quadratic responses to STSB contents of media. As incorporation rate of STSB increased, more water was retained in four root media at the soil moisture tension of 4.90 kPa, 9.81 kPa, 29.4 kPa and 1.5 MPa. The amount of water retained in PS medium was the highest at the moisture tension at 29.4 kPa and 1.5 MPa followed by PB, PR and PV medium. These results indicated that elevation of incorporation rate of STSB to various root media increased moisture retention capacity, but did not increase the available water holding capacity.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.720-726
• /
• 2019

Recently, research on cost reduction and efficiency improvement of crystalline silicon(c-Si) photovoltaic(PV) module has been conducted. In order to reduce costs, the thickness of solar cell wafers is becoming thinner. If the thickness of the wafer is reduced, cracking of wafer may occur in high temperature processes during the c-Si PV module manufacturing process. To solve this problem, a low temperature process has been proposed. Conductive paste(CP) is used for low temperature processing; it contains Sn57.6Bi0.4Ag component and can be electrically combined with solar cells and ribbons at a melting point of $150^{\circ}C$. Use of CP in the PV module manufacturing process can minimize cracks of solar cells. When CP is applied to solar cells, the output varies with the amount of CP, and so the optimum amount of CP must be found. In this paper, in order to find the optimal CP application amount, we manufactured several c-Si PV modules with different CP amounts. The amount control of CP is fixed at air pressure (500 kPa) and nozzle diameter 22G(outer diameter 0.72Ø, inner 0.42Ø) of dispenser; only speed is controlled. The c-Si PV module output is measured to analyze the difference according to the amount of CP and analyzed by optical microscope and Alpha-step. As the result, the optimum amount of CP is 0.452 ~ 0.544 g on solar cells.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.405-409
• /
• 2003

We explored a new rough grinding technique on optics materials such as Zerodur. The facility used is a NANOFORM-600 diamond turning machine with a custom grinding module and range of diamond resin bond wheel. The grinding parameters such as workpiece rotation speed depth of cut and feed rate were altered while grinding the workpiece surfaces of 20m in diameter. Surface roughness is measured by Form Talysurf series2. Our target is to define grinding conditions producing the surface roughness better than 0.02${\mu}{\textrm}{m}$ Ra and the form accuracy of around 0.2${\mu}{\textrm}{m}$ PV.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.570-576
• /
• 2005

Powder Injection Molding(PIM) has recently been recognized as an advanced manufacturing technology for low-cost mass production of metal or ceramic parts of complicated geometry With this regards, design technology of dental scaler tip PIM mold, which has complex shape and small core pin (diameter=0.6mm), with the help of computer-aided analysis of powder injection molding process was developed. Computer-aided analysis for dental scaler tip mold was implemented by finite element method with non-Newtonian fluid, modified Cross model viscosity, PvT data of powder/binder mixture. Compter-aided analysis results, such as filling pattern, weldline formation, air vent position prediction were compared with experimental result, and eventually have been shown good agreement. The core pin (diameter=0.6mm) deflection analysis of dental scaler tip PIM mold during PIM filling process was also investigated before mold fabrication.

• Communications of Mathematical Education
• /
• v.36 no.1
• /
• pp.23-38
• /
• 2022

The study provided a perspective on which readers can see Newton's proof heuristically in order to overcome the difficulty of proof showing 'QT²/QR converges to the latus rectum of ellipse' in the proof of the inverse square law of Newton's Principia. The heuristic perspective is as follows: The starting point of the proof is the belief that if we transform the denominators and numerators of QT²/QR into expression with respect to segments related to diameter and conjugate diameter, we may obtain some constant, the desired value, by their relationship PV × VG/QV² = PC²/CD² in Apollonius' Conic sections. The heuristic perspective proposed in this study is meaningful because it can help readers understand Newton's proof more easily by presenting the direction of transformation of QT²/QR.

• Research in Plant Disease
• /
• v.13 no.1
• /
• pp.61-65
• /
• 2007

English ivy (Hedera helix) in Araliaceae family is an evergreen climbing vine. A severe bacterial disease of English ivy was observed and investigated in January 2005. Initial symptoms on the leaves appeared as small water-soaked lesions on the lower surface. As the spots enlarged, the center became brown to brownish black and greenish-brown water-soaked, irregular margins surrounded the center, The spots developed into large irregular blotches, sometimes 5$\sim$10 mm in diameter, then coalesced. Finally, the water-soaked margins raised, dried out, became corky and broke in the center. A bacterial organism, isolated from the advancing margins of the lesions, was tested for its pathogenicity according to the Koch's postulates and biochemical and physiological tests identified the isolated bacterium as a Xanthomonas. The representative Xanthomonas strains (SL4821 and SL4822) isolated from English ivy were compared with a reference strain X. hortorum pv. hederae for fatty acid profiles, metabolic fingerprints and 16s rDNA sequences, showing that all outcomes were indistinguishable between the representative and reference strains. This is the first report of bacterial leaf spot of English ivy in Korea.