• 한국통신학회논문지
• /
• 제31권8A호
• /
• pp.798-803
• /
• 2006

다중사용자 다중입출력 시스템에서 채널 적응 기술을 사용하면 시스템의 통신용량을 증가시킬 수 있다. 하지만 이를 위해서는 많은 양의 사용자 채널품질 정보가 송신 단에 되돌림 되어야 한다. 다중사용자 다중입출력 시스템으로 기존에 제안된 per user unitary and rate control(PU2RC)는 사전코딩(preceding) 정보와 그때의 채널품질정보가 요구되며, 스케줄링의 효율이 떨어지는 단점이 있었다. 이러한 단점을 극복하기 위하여 본 논문에서는 되돌림 정보량 줄이는 새로운 방법을 제안한다. 제안된 기법은 미리 알려진 사전코딩행렬을 사용하고 사용자의 채널상황에 따라 선택적 되돌림(opportunistic feedback) 방법을 사용한다. 모의실험을 통하여 제안된 기법이 기존의 PU2RC 대비 훨씬 적은양의 되돌림 정보량으로 비슷한 통신용량 성능을 보장함을 보인다.

• Journal of electromagnetic engineering and science
• /
• 제11권1호
• /
• pp.34-41
• /
• 2011

This paper proposes a systematic design for a precoding codebook for a transmit-ing space-division multiple access (TN-SDMA) sharing spectrum with existing fixed wireless service (FWS). Based on an estimated direction angle of a victim FWS system, an interfering transmitter adaptively constructs a codebook, forming a transmit in the direction angle, while satisfying orthogonal beamforming constraints. Sum throughput results indicate that the throughput loss of TN-SDMA relative to a practical SDMA, called per user unitary and rate control ($PU^2RC$), is lower at larger number of transmission antennas, lower signal-to-noise ratio, or a smaller number of users. In particular, a small loss (12% throughput loss) is provided for practical system parameters. Spectrum sharing results confirm that TNSDMA efficiently shares spectrum with FWS systems by reducing protection distance to more than 66 %. Although a TN-SDMA system always has lower throughput compared to $PU^2RC$ in non-coexistence scenarios; it offers an intriguing opportunity to re-use a spectrum already allocated to an FWS.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2003

Tactel(Nylon66) union fabrics were woven with the specification of 70d/34f nylon as warp for sport wear jacket. Weft yarn has three types; 100% cotton yarn, nylon core-spun yarn and nylon-polyurethane covering yarn as weft. Fabric structers were plain, twill and satin weave structure with the air jet loom. The mechanical properties of 8 fabrics were measured with KES-F and primary Hand Values and Total Hand Values were calculated. The results of the study were as follows: 1) There was little difference among LTs of N/CM fabric groups. RT of the fabrics with CM100's was bigger than that of fabrics with CM80's, resulting that the fabrics with CM100's have better formability. In terms of weaving structure, twill fabrics have shape deformation. 2) In comparison of RTs with weft yarn type, RT of N-PU covering yarn was the highest, followed by Nylon core-spun yarn and cotton yarn. Thus, the fabric with N-PU covering yarn has better stability of shape deformation. 3) Stretch yarn could express an excellent silhouette formation and twill and satin structures were better structure to make curvature on human form. 4) 2HG/G value of nylon core-spun fabrics was larger than that of N/C fabrics, but the silhouette formation of N/C fabrics was excellent. 5) The RC of N/PU was the highest, followed by N/P, and N/CM. 6) Koski of N/PU fabrics was the highest, Numeri of N/PU and N/Co-I were relatively higher than the others. THVs of N/CM-IV and N/CO-II were lower than the others, resulting that, twill structure was better than plain structure for a sport wear uses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권3호
• /
• pp.1-8
• /
• 2017

전 세계적으로 지진발생이 빈번하고 많은 인명피해와 사회기반시설물의 피해가 발생하고 있다. 지진에 대한 보수, 보강기법에 대한 연구가 많이 있었지만 대부분은 강성보강형태로 반복적인 하중이 구조물에 작용하면 2차적 피해가 발생할 수 있다. 따라서 강성보강이 아닌 연성보강형태의 보수, 보강기법이 필요하다. 본 연구에서는 철근 콘크리트 기둥 부재에 적용할 수 있는 보강 공법으로써 폴리머계의 고인성과 고연성 효과를 나타내는 경질형 폴리우레아를 내진보강용 재료로 선택하였고 재료의 열화 및 내화학적 특성에 대한 내구 성능을 평가하였다. 내구 성능 평가는 폴리우레아의 산 환경 및 자외선 노출 시험을 실시하였고, 폴리우레아를 도포한 콘크리트의 탄산화 노출 및 동결융해 시험을 실시하였다. 내진보강용 폴리우레아는 모든 시험을 통하여 내구성능과 저항능력이 우수한 것으로 판단되며 추후 내진 보강 재료로써 유용하게 사용될 것으로 사료된다.

• 대한한방내과학회지
• /
• 제33권4호
• /
• pp.533-542
• /
• 2012

Objectives : We try to compared the efficacy of six herbal medicines, Rhizoma Alismatis (RA), Fructus Crataegi (FC), Fructus Lycii (FL), Radix Curcumae (RC), Radix Salviae Miltiorrhizae (RSM), and Herba Artemisiae Scopariae (HAS), constituting KHchunggan-tang which was previously proven to be hepatoprotective on non-alcoholic fatty liver disease with combined properties of cellular steatosis, ROS production, and cytoprotection. Methods : HepG2 cells were pretreated with aqueous extracts of the six herb medicines at concentrations of 1, 10, 50 and 100 ${\mu}g/ml$ each, and treated with 0.5 mM palmitate consecutively. After 21 hrs, cell viability was assessed using MTT assay, and the percentage of cells with sub-G1 DNA content was measured using fluorescence-activated cell sorting after propidium iodide staining. Results : The first three extracts, RA, FC, and FL restored cell viability reduced by palmitate in MTT assay, and RA, FC, FL and RC inhibited palmitate-induced apoptosis in sub-G1 analysis. FL showed relatively weak potential only at tested maximal dose, and RA showed the greatest higher efficacy on this experimental cellular model of nonalcoholic fatty liver disease. Conclusions : According to this comparative experiment, Rhizoma Alismatis seems to have the most powerful potential among the six herbs constituting KHchunggan-tang, and consecutive further study seems to be required for more standardized and effective clinical application of KHchunggan-tang for treatment of non-alcoholic fatty liver disease.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권4호
• /
• pp.282-291
• /
• 2010

This paper presents a full-CMOS transmitter and receiver for VDSL2 systems. The transmitter part consists of the low-pass filter, programmable gain amplifier (PGA) and 14-bit DAC. The receiver part consists of the low-pass filter, variable gain amplifier (VGA), and 13-bit ADC. The low pass filter and PGA are designed to support the variable data rate. The RC bank sharing architecture for the low pass filter has reduced the chip size significantly. And, the 80 Msps, high resolution DAC and ADC are integrated to guarantee the SNR. Also, the transmitter and receiver are designed to have a wide dynamic range and gain control range because the signal from the VDSL2 line is variable depending on the distance. The chip is implemented in 0.25 ${\mu}m$ CMOS technology and the die area is 5 mm $\times$ 5 mm. The spurious free dynamic range (SFDR) and SNR of the transmitter and receiver are 67.5 dB and 41 dB, respectively. The power consumption of the transmitter and receiver are 160 mW and 250 mW from the supply voltage of 2.5 V, respectively.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.175-181
• /
• 2015

In this study, a lithium polymer battery (LiPB) is simply expressed by a primary RC equivalent model. The PI state observer is designed in Matlab/Simulink. The non-linear relationship with the OCV-SOC is represented to be linearized with 0.1 pu intervals by using battery parameters obtained by constant-current pulse discharge. A state equation is configured based on battery parameters. The state equation, which applied Peukert's law, can estimate SOC more accurately. SOC estimation capability was analyzed by utilizing reduced Federal Test Procedure (FTP-72) current profile and using a bi-directional DC-DC converter at temperature ($25^{\circ}C$). The PI state observer, which is designed in this study, indicated a SOC estimation error rate of ${\pm}2%$ in any of the initial SOC states. The PI state observer confirms a strong SOC estimation performance despite disturbances, such as modeling errors and noise.

• 콘크리트학회논문집
• /
• 제29권2호
• /
• pp.131-139
• /
• 2017

현재 우리나라 주변에서 지진 발생이 빈번하며 철근콘크리트 구조물에 적용할 수 있는 내진보강 방법에 대한 연구가 필요한 실정이다. 최근 보수 보강 재료로 각광받고 있는 폴리우레아는 철근콘크리트 구조물 뿐 아니라 폭발 및 충격에도 우수한 성능을 검증된 바 있다. 폴리우레아를 이용하여 보강성능을 향상시킨 연질형 폴리우레아는 보수 보강의 한계점이 있기 때문에 연질형 폴리우레아의 주제와 경화제 함유량을 단계별로 달리하여 내진보강용 경질형 폴리우레아를 개발하였다. 개발된 재료의 성능을 검토하기 위하여 지속시간, 인장강도, 신장률, 부착성능, 경도 시험을 수행하였다. 내진보강용 폴리우레아의 경우 기존의 연질형 폴리우레아보다 높은 인장강도와 낮은 신장률의 성능을 나타냈다. 신장률이 높아지게 되면 보강된 구조물의 강성 효과가 저하되기 때문에 단계별 재료개발에서 낮은 신장률을 유도하였다. 따라서 내진보강용 폴리우레아 피막제의 제조는 피복에 의한 반영구적 제품을 제조할 수 있을 뿐 아니라 FRP, 강재, 부직포 등으로 보강된 기둥에 피복한다면 내진성 및 내구성을 최대로 할 수 있을 것이다.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.958-968
• /
• 2003

The purpose of this study was to clarify the different mechanical properties of fabrics among the theme groups classified by fashion fabric trend. This study can be useful for fabric marketers and planners to design new products. In order to carry out this study, the fabric samples of representative theme for‘2002/03 F/W fashion fabric trend were collected from a fashion company and were measured to analyze the mechanical properties, hand value(H.V) and total hand value(T.H.V) by KES-FB System. The results were as follows. 1. The theme-A of‘Luxury, Elegance’was consisted of wool, rayon and PET and had a lower B, 2HB of bending properties and a lower G and 2HG5 of shear properties. The theme-B of‘Technical, Functional’was consisted of synthetic fibers such as PET, PA, PU and elastic fiber and had a higher MIU and a lower MMD, SMD of surface properties. The theme-C of‘Vintage, Aged’was consisted of mostly cotton and had the highest B and 2HB. The theme-D of‘Fancy, Airy’was consisted of mostly woolen wool, polyacryl and polyamide and had a high MMD and SMD of surface properties and a high LC and RC of compression properties. 2. As the results of analyzing H.V and T.H.V through KES-FB system, the theme-A showed a higher Smoothness and lower Stiffness. The theme-B had a lower Smoothness, Fullness, Soft feeling and T.H.V and the theme-C had the highest Stiffness. The theme-D showed the highest Fullness and Soft Feeling but the lowest Stiffness.