• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.279-289
• /
• 2015

Genetic diversity and genetic differentiation of thirteen Pinus densiflora populations in South Korea were estimated using nine ESTP (Expressed Sequence Tag Polymorphism) markers. The numbers of allele and the effective allele were 2.2 and 1.8, respectively. The percentage of polymorphic loci (P) was 98.8%. The observed and the expected heterozygosity were 0.391 and 0.402, respectively, and the eleven populations except for Ahngang and Gangneung population were under Hardy-Weinberg equilibrium state. The level of genetic differentiation (Wright’s F_ST = 0.057) was higher than those of isozyme or nSSR markers. We could not find out any relationship between the genetic distance and geographic distribution among populations from cluster analysis. Also, the genetic differentiation between populations was not correlated with the geographic distance (r = 0.017 and P = 0.344 from Mantel test). From the result of F_ST-outlier analysis to identify a locus under selection, six loci were detected at confidence interval of 99% by the frequentist’s method. However, only three loci (sams2+AluⅠ, sams2+RsaⅠ, PtNCS_p14A9+HaeⅢ) were presumed as outliers by Bayesian method. The sams2+AluⅠ and sams2+RsaⅠlocus were originated from the sams2 gene and seemed to be the loci under balancing selection.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.231-238
• /
• 2023

The position of a light buoy is always flexible due to the influence of external forces such as tides and wind. The position can be checked through AIS (Automatic Identification System) or RTU (Remote Terminal Unit) for AtoN. As a result of analyzing the position data for the last five years (2017-2021) of a light buoy, the average position error was 15.4%. It is necessary to detect position error data and obtain refined position data to prevent navigation safety accidents and management. This study aimed to detect position error data and obtain refined position data by DBSCAN Clustering position data obtained through AIS or RTU for AtoN. For this purpose, 21 position data of Gunsan Port No. 1 light buoy where RTU was installed among western waters with the most position errors were DBSCAN clustered using Python library. The minPts required for DBSCAN Clustering applied the value commonly used for two-dimensional data. Epsilon was calculated and its value was applied using the k-NN (nearest neighbor) algorithm. As a result of DBSCAN Clustering, position error data that did not satisfy minPts and epsilon were detected and refined position data were acquired. This study can be used as asic data for obtaining reliable position data of a light buoy installed with AIS or RTU for AtoN. It is expected to be of great help in preventing navigation safety accidents.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.586-593
• /
• 2005

It is very important to reduce the PAPR(Peak to Average Power Ratio) in the OFDM(Orthogonal Frequency Division Multiplexing) communication system. We propose an ACE(Active Constellation Extension) method that does not require the side information unlike the conventional PTS and SLM method. This ACE method is to clip the OFDM signal for the PAPR reduction. Then, the basic constellation actively moves into the higher level of M-QAM for the constellation extension due to the clipping. The already existing M-QAM system can be available so that it can be easily realized. So, we can get the target PAPR by the extension of the constellation level. In this paper, we can find the PAPR reduction of 4 dB by the 16-QAM extension, and can achieve the target PAPR by the 64-QAM ACE(Active Constellation Extension).

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.163-163
• /
• 1999

MOSFET, MESFET 그리고 MODFET는 Logic ULSIs, high speed ICs, RF MMICs 등에서 중요한 역할을 하고 있으며, 그것의 gate electrode, contact, interconnect 등의 물질로는 refractory metal을 이용한 CoSi2, MoSi2, TaSi2, PtSi2, TiSi2 등의 효과를 얻어내고 있다. 그중 TiSi2는 비저항이 가장 낮고, 열적 안정도가 좋으며 SAG process가 가능하므로 simpler alignment process, higher transconductance, lower source resistance 등의 장점을 동시에 만족시키고 있다. 최근 소자차원이 scale down 됨에 따라 TiSi2의 silicidation 과정에서 C49 TiSi2 phase(high resistivity, thermally unstable phase, larger grain size, base centered orthorhombic structure)의 출현과 그것을 제거하기 위한 노력이 큰 issue로 떠오르고 있다. 여러 연구 결과에 따르면 PAI(Pre-amorphization zimplantation), HTS(High Temperature Sputtering) process, Mo(Molybedenum) implasntation 등이 C49를 bypass시키고 C54 TiSi2 phase(lowest resistivity, thermally stable phase, smaller grain size, face centered orthorhombic structure)로의 transformation temperature를 줄일 수 있는 가장 효과적인 방법으로 제안되고 있지만, 아직 그 문제가 완전히 해결되지 않은 상태이며 C54 nucleation에 대한 physical mechanism을 밝히진 못하고 있다. 본 연구에서는 증착 시 기판온도의 변화(400~75$0^{\circ}C$)에 따라 silicon 위에 DC/RF magnetron sputtering 방식으로 Ti/Si film을 각각 제작하였다. 제작된 시료는 N2 분위기에서 30~120초 동안 500~85$0^{\circ}C$의 온도변화에 따라 RTA법으로 각각 one step annealing 하였다. 또한 Al을 cosputtering함으로써 Al impurity의 존재에 따른 영향을 동시에 고려해 보았다. 제작된 시료의 분석을 위해 phase transformation을 XRD로, microstructure를 TEM으로, surface topography는 SEM으로, surface microroughness는 AFM으로 측정하였으며 sheet resistance는 4-point probe로 측정하였다. 분석된 결과를 보면, 고온에서 제작된 박막에서의 C54 phase transformation temperature가 감소하는 것이 관측되었으며, Al impuritydmlwhswork 낮은온도에서의 C54 TiSi2 형성을 돕는다는 것을 알 수 있었다. 본 연구에서는 결론적으로, 고온에서 증착된 박막으로부터 열적으로 안정된 phase의 낮은 resistivity를 갖는 C54 TiSi2 형성을 보다 낮은 온도에서 one-step RTA를 통해 얻을 수 있다는 결과와 Al impurity가 존재함으로써 얻어지는 thermal budget의 효과, 그리고 그로부터 기대할 수 있는 여러 장점들을 보고하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.414-420
• /
• 2004

Partial transmit sequence(PTS) scheme has been widely studied to reduce the peak-to-average power ratio(PAPR) of Orthogonal frequency-division multiplexing(OFDM) signal since it is flexible ad any spectral regrowth is not made. A necessity of the PTS scheme is to transmit the side information about the phase rotation factors for correct OFDM symbol recovery. In this paper, a new side information embedded PTS scheme using the reference symbols is proposed fur the PAPR reduction and the BER(bit error rate) performance is analyzed when the erroneous side information is received. In this proposed method, the information about the rotation factors is expressed by the phase of reference symbols. The proposed method maintains the same PAPR reduction performance as the conventional PTS scheme and OFDM symbols are correctly recovered by the side information to meet the required BER level, which is verified via the computer simulation. Also, it is shown that the proposed method can be easily realized and can be used for all kinds of digital modulation formats in the OFDM communication system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.3
• /
• pp.134-141
• /
• 2005

Cultivation of winter cover crops and its soil utilization for summer main crops in slope upland is very important at the respects of diminution of soil erosion and non-point pollution source. The effects of cover crop, hairy vetch as no-tillage or conventional tillage on prevention of soil erosion and reduction of chemical nitrogen fertilization were investigated in the slope upland with whiter clover living mulch (partial tillage) in Suwon for three years and with rye (conventional tillage) in Hongcheon for two years, respectively. In Suwon, amounts of soil lost by rainfall runoff decreased as much as 90% by hairy vetch-no tillage (HV-NT), white clover-partial tillage (WF-PT) together with the decrease of rainfall runoff compared to winter fallow with conventional tillage (WF-CT). In addition, amounts of weed also decreased as much as 80-90% by HV-NT and WF-PT. Corn yield decreased much at the plot of WF-PT mainly due to competition for soil water and nutrients between clover and corn at the early corn growth stage. On the contrary, corn yield increased by HV-NT compared to WF-CT regardless of weed control. In Hongcheon, amounts of soil eroded during winter season before corn seeding were reduced as much as 95% by cultivation of hairy vetch and rye compared to winter fallow. Amount of soil eroded during waxy corn growing season was reduced as much as 98% by HV-NT compared to WF-CT. Also, soil incorporation of hairy vetch and rye as green manure with conventional tillage at corn seeding time could reduce soil erosion as much as 70% compared to no soil cover with conventional tillage. Ear yields of waxy corn were increased 10% higher at hairy vetch green manure (HV-CT) without nitrogen fertilizer, 20% higher at HV-NT with standard nitrogen fertilizer, respectively than WF-CT. But ear yields of waxy corn were decreased by rye green manure (R-CT) and HV-NT at the condition of no nitrogen fertilizer. It was concluded that hairy vetch was better as winter cover crop to reduce both soil erosion and chemical nitrogen fertilizer simultaneously in slope upland than other cover crops.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.308-322
• /
• 2002

The main objective of this paper is to examine the working conditions of physical therapists and to investigate the level of job satisfaction and organizational commitment under different working conditions. A survey was conducted through structured questionnaire for the physical therapists working in Busan area, and data from 175 therapists were utilized in the final analysis. Survey items included general characteristics of the therapists(sex, age, education, marital status, religion, income, career years, etc.), their working conditions(kinds of organizations they work in, location of PT room, weekly working hours, average number of patients, number of co-workers, equipments/facilities, etc.), and organizational effectiveness measured in terms of job satisfaction and organizational commitment. Major results are as follows: 1) As for the general characteristics of the surveyed physical therapists, male(51.4$\%$) slightly exceeded female(48.6$\%$) and majority(more than 90$\%$) was 20-39 in age. Also, there were more single(57.7$\%$) than married(42.3$\%$), and 54.9$\%$ of the respondents had religion while 45.1$\%$ did not. In terms of the ranks in their organizations, only a few of them(6.9$\%$) were managers, and monthly salary mostly ranged from $\￦$1,000,000 to $\￦$2,500,000. More than half of them worked in various kinds of hospitals, with the remaining in health centers or social welfare institutions. 2) In regard to the working conditions of the respondents, 19.4$\%$ of PT rooms were located in basement areas while the remaining 80.6$\%$ in first to third floors. 34.3$\%$ of them treated 15 patients or less per day, whereas 25.1$\%$ treated 31 patients or more. Also, 52$\%$ recorded physical therapy charts periodically. As for the equipments and facilities, 25.1$\%$ felt 'sufficient' and 40$\%$'insufficient.' 3) The respondents provided various kinds of suggestions for the improvement of their working conditions, where the most important were 'salary raise' and 'reduction of working hours.' In addition, their requests to the PT Association included 'permission of opening of independent practice,' 'permission of legal specialty,' and 'vitalization of the Association.' 4) The comparative analysis of job satisfaction and organizational commitment among different characteristics of the respondents revealed that there was no significant difference between male and female, but in terms of age, the group of 40 or older was highest in both aspects. Besides, therapists who had 15 or more years of hospital career reported higher job satisfaction and organizational commitment than the others. It was also found that the level of organizational commitment increased as the rank of the respondents got higher. There were no significant differences in terms of marital status and religion. 5) Comparison with regard to working conditions showed that therapists employed in university hospitals, health centers and social welfare institutions felt higher job satisfaction and organizational commitment than those in community hospitals and clinics. Also, respondents who worked in basement areas had significantly lower job satisfaction than otherwise. The length of weekly working hours did not really affect the level of job satisfaction, but it was important to maintain 'regular working hours' for the hospitals to improve the employees' organizational commitment. As for the number of patients per day, 'medium level' (21-25 patients) had highest scores in both aspects. And, finally, sufficiency of equipments and facilities was found to be important for the improvement of organizational commitment.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.15-25
• /
• 2012

The aim of this study is to evaluate plan quality and dose accuracy for Volumetric Modulated Arc Therapy (VMAT) on the TG-119 and is to investigate the effects on variation of the selectable optimization parameters of VMAT. VMAT treatment planning was implemented on a Varian iX linear accelerator with ARIA record and verify system (Varian Mecical System Palo Alto, CA) and Oncentra MasterPlan treatment planning system (Nucletron BV, Veenendaal, Netherlands). Plan quality and dosimetric accuracy were evaluated by effect of varying a number of arc, gantry spacing and delivery time for the test geometries provided in TG-119. Plan quality for the target and OAR was evaluated by the mean value and the standard deviation of the Dose Volume Histograms (DVHs). The ionization chamber and $Delta^{4PT}$ bi-planar diode array were used for the dose evaluation. For treatment planning evaluation, all structure sets closed to the goals in the case of single arc, except for the C-shape (hard), and all structure sets achieved the goals in the case of dual arc, except for C-shape (hard). For the variation of a number of arc, the simple structure such as a prostate did not have the difference between single arc and dual arc, whereas the complex structure such as a head and neck showed a superior result in the case of dual arc. The dose distribution with gantry spacing of $4^{\circ}$ was shown better plan quality than the gantry spacing of $6^{\circ}$, but was similar results compared with gantry spacing of $2^{\circ}$. For the verification of dose accuracy with single arc and dual arc, the mean value of a relative error between measured and calculated value were within 3% and 4% for point dose and confidence limit values, respectively. For the verification on dose accuracy with the gantry intervals of $2^{\circ}$, $4^{\circ}$ and $6^{\circ}$, the mean values of relative error were within 3% and 5% for point dose and confidence limit values, respectively. In the verification of dose distribution with $Delta^{4PT}$ bi-planar diode array, gamma passing rate was $98.72{\pm}1.52%$ and $98.3{\pm}1.5%$ for single arc and dual arc, respectively. The confidence limit values were within 4%. The smaller the gantry spacing, the more accuracy results were shown. In this study, we performed the VMAT QA based on TG-119 procedure, and demonstrated that all structure sets were satisfied with acceptance criteria. And also, the results for the selective optimization variables informed the importance of selection for the suitable variables according to the clinical cases.

• Korean Journal of Materials Research
• /
• v.7 no.3
• /
• pp.196-202
• /
• 1997

Perovskite lanthanum doped lead titanate ($(Pb,La)TiO_{3}$ or PLT) thin films were successfully fabricated on Pt/TijSiO.iSi substrates at the temperatures as low as $440~500^{\circ}C$ by eleclron cyclotron resonance plasma-enhanced chemical vapor deposition (ECR PECVII). Since the volatilities of the MC sources arid oxide molecules (especially Ph oxide) increased with increasing deposition temperature, the film deposition rate and the (I'b + La)/'Ti ratio decreased Stoichiometric perovskite PL'T films with good dielectric and leakeage current properties were obtained at the temperatures of $460~480^{\circ}C$. The lanthanum content of the film was nearly directly propotional to $La(DPM)_{3}$ flow rate. As the La/Ti ratio increased from 3.0 to 9.5%, the dielectric constant increased from 360 to 650 and the leakeage current density at 100kV/cm electric field decreased from $4{\times}10^{-5}$ to $4{\times}10_{-8}A/cm^2$.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.32 no.4
• /
• pp.5-24
• /
• 2021

The purpose of this study was to investigate and analyze the operating conditions of lecture contents in contactless online classes for University students. First, as a result of analyzing the responses of 93 respondents, 93.3% of the respondents took real-time online lectures (47.7%) or recorded video lectures (45.6%). Second, as a result of analyzing the contents used as textbooks, it was found that e-books (materials) and paper books (materials) were used together (36.6%), or e-books or electronic materials (36.6% and 37.6% respectively) were used in both liberal arts (47.3%) and major subjects (39.8%). In addition to textbooks, both major subjects and liberal arts highly used web materials (47.6% and 40.5% respectively) and YouTube materials (33.3% and 48.0% respectively) as external materials. Third, both liberal arts and major subjects used 'electronic files in the form of PPT or text organized and written by instructors' (62.9% and 58.1% respectively), 'internet materials' (16.7% and 19% respectively) and 'paper book or materials' (10.4% and 12.3% respectively) to share lecture contents. For the screen displayed lecture contents, 93.5% of the respondents satisfied in major subjects, and 90.2% of the respondents satisfied in liberal arts. These results suggest developing multimedia-based lecture contents and an evaluation solution capable of real-time exam supervision, developing a task management system capable of AI-based plagiarism search, task guidance, and task evaluation, and institutionalizing a solution to copyright problems for electronicizing lecture materials so that lectures can be given in the ubiquitous environment.