• 한국수자원학회논문집
• /
• 제48권7호
• /
• pp.581-593
• /
• 2015

본 연구에서는 ESP (Ensemble Streamflow Prediction)기법을 활용한 가뭄전망 체계를 구축하고 가뭄예보에 있어 활용성을 평가하였다. 과거 관측 수문기상 및 지형정보를 이용하여 우리나라 전역에 지면모델(Land Surface Model, LSM)을 구축하고 유출량(Historical Runoff, HR)을 생산하였다. 또한, 모의기간 동안 과거 30개 기상자료와 초기 토양수분량을 이용하여 선행시간별(1, 2, 3개월) 전망된 유출량(Predicted Runoff, PR)을 생산하였다. 평가결과 여름 및 가을철 보다 봄철 및 겨울철에 정확도가 높았으며, 1개월 전망 이후로는 정확도가 낮게 나타났다. 가뭄지수는 국내 가뭄해석에 있어 검증된 표준유출지수(Standardized Runoff Index, SRI)를 활용하였으며, PR_SRI을 산정 및 평가하였다. 1, 2개월 전망에서는 과거 HR이 고려되어 ESP HR에 비해 정확도가 크게 개선됨을 알 수 있었다. 선행시간별 상관계수는 평균 0.71, 0.48, 0.00, 평균제곱근오차는 0.46, 0.76, 1.01로 나타났으며, 건조기에 정확도가 높게 나타나 1, 2개월 전망까지는 ESP를 활용한 국내 가뭄예보의 활용성이 높다고 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.624-627
• /
• 2003

The BLT thin-films were one of the promising ferroelectric materials with a good leakage current and degradation behavior on Pt electrode. The BLT target was sintered at $1100^{\circ}C$ for 4 hours at the air ambient. $Bi_{3.25}La_{0.75}Ti_3O_{12}$ (BLT) thin-film deposited on $Pt/Ti/SIO_2/Si$ wafer by rf magnetron sputtering method. At annealed $700^{\circ}C$, (117) and (006) peaks appeared the high intensity. The hysteresis loop of the BLT thin films showed that the remanent polarization ($2Pr=Pr^+-Pr^-$) was $16uC/cm^2$ and leakage current density was $1.8{\times}10^{-9}A/cm^2$ at 50 kV/cm with coersive electric field when BLT thin-films were annealed at $700^{\circ}C$. Also, the thin film showed fatigue property at least up to $10^{10}$ switching bipolar pulse cycles under 7 V. Therefore, we induce access to optimum fabrication condition of memory device application by rf-magnetron sputtering method in this report.

• 한국태양에너지학회 논문집
• /
• 제29권1호
• /
• pp.18-23
• /
• 2009

We intend to describe a 12kW building-integrated photovoltaic system which was applied into the south wall of a new building. This study showed the results that were appeared from describing the PV module manufacture and installation process, and performing generation performance analysis of BIPV system. From the result we confirmed that the generation performance of the BIPV system was changed by season. The performance ratio(PR) was about 83.6% in winter and it means that performance of this BIPV system was so good in that season. On the other hand, the PR in summer was about 75.0% dropped about 8%. It was believed that the change was influenced by the reduction of solar radiation irradiated into the PV modules by installation position and rainy spell in summer. And we also confirmed that low irradiation condition is cause of the additional loss in the total PV system. In this case, the efficiency ratio of PCS drops significantly at low input loads and the average conversion efficiency of PCS in summer was 76.4% decreased about 10% from 86% in winter.

• Journal of Power Electronics
• /
• 제13권5호
• /
• pp.861-876
• /
• 2013

Instead of extracting every selected harmonic component, the current reference of selective active power filter (APF) can be also obtained by filtering out the fundamental component from distorted load current for computation efficiency. This type of mixed current reference contains kinds of harmonic components and easily involves noises. In this condition, selective harmonic compensation must be realized by the current controller. With regard that selectivity is the most significant feature of controller, this paper presents specific comparison analysis between two types of resonant controllers: proportional-resonant (PR) controller and vector-resonant (VR) controller. The comparison analysis covers the relations, performances, and stability of both controllers. Analysis results conclude that the poorer selectivity of the PR controller could be relatively improved, but limitations from system stability make the improvement hardly realized. By contrast, the VR controller exhibits excellent selectivity and is more suitable for selective APF with mixed current reference. Experimental results from laboratory prototype validate the reasonability of analysis. And the features of each resonant controller are concluded.

• 상하수도학회지
• /
• 제31권4호
• /
• pp.339-346
• /
• 2017

In this study, thermal performance test of VMD module was performed, prior to the construction of the demonstration plant using the vacuum membrane distillation (VMD) module of the capacity of $400m^3/day$ and to the commercialization of the VMD module. For the thermal performance test, the experimental equipment of capacity of $2m^3/day$ was constructed. The permeate flux test and thermal performance test according to feed water conditions such as temperature and flow rate were conducted. The VMD module used in the study was manufactured by ECONITY Co., LTD with PVDF hollow fiber membrane. As a result, the Performance Ratio (PR) of the VMD module showed the maximum value of 0.904 under the condition of feed water temperature of $75^{\circ}C$ and flow rate of $8m^3/h$. PR value of the VMD module using PVDF hollow fiber membrane showed linearly increasing relationship with feed water temperature and flow rate. Also, The permeate flux of the VMD module was analyzed to have maximum value of 18.25 LMH and the salt rejection was 99.99%.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.496-501
• /
• 2007

In order to enhance sintering characteristics on the $ZnO-Pr_6O_{11}$ based multilayer chip varistors (MLVs), a response surface analysis using central composite design method were carried out. As a result, varistor voltage($V_{1mA}$), nonlinear coefficient ($\alpha$), leakage current ($I_L$) and capacitance (C) were considered to be mainly affected by sintered temperature and holding time. MLVs sintered at $1200^{\circ}C$ and above $1200^{\circ}C$ revealed poor electrical characteristics, possibly due to the reaction between electrode materials(Pd) and $ZnO-Pr_6O_{11}$ based ceramics. On the sintering temperature range $1150{\sim}1175^{\circ}C$, nonlinear coefficient ($\alpha$) and leakage current ($I_L$) were shown to be $60{\sim}69$ and below $0.3{\mu}A$, respectively. In particular, MLVs sintered at $1175^{\circ}C$, 1.5 hr and $2^{\circ}C/hr$ (cooling speed) showed stable ESD(Electrical Static Discharge) characteristics under the condition of 10 times at 8 Kv with deviation varistor voltage, and deviation nonlinear coefficient were 0.3% and 0.33% (at positive), 0.55% (at negative), respectively.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.325-331
• /
• 2007

In this study, the inter-metal dielectric material of FSG was changed by low-k material in $0.13{\mu}m$ foundry-compatible technology (FCT) device process based on fluorinated silicate glass (FSG). Black diamond (BD) was used as a low-k material with a dielectric constant of 2.95 for optimization and yield-improvement of the low-k based device process. For yield-improvement in low-k based device process, some problems such as photoresist (PR) poisoning, damage of low-k in etch/ash/cleaning process, and chemical mechanical planarization (CMP) delamination must be solved. The PR poisoning was not observed in BD based device. The pressure in CMP process decreased to 2.8 psi to remove the CMP delamination for Cu-CMP and USG-CMP. $H_2O$ ashing process was selected instead of $O_2$ ashing process due to the lowest condition of low-k damage. NE14 cleaning after ashing process lot the removal of organic residues in vias and trenches was employed for wet process instead of dilute HF (DHF) process. The similar-state of SRAM yield was obtained in Cu/low-k process compared with the conventional $0.13{\mu}m$ FCT device by the optimization of these process conditions.

• 한국콘텐츠학회논문지
• /
• 제21권9호
• /
• pp.209-220
• /
• 2021

본 연구의 목적은 다수 비영리 기관들이 기금모금을 위해 홍보대사를 활용하는 모금 캠페인에서 실제 홍보 대사의 효과를 실증적으로 검증하는 것이다. 연구가설을 분석하기 위해 홍보대사 유형(인지도 고-전문가, 인지도 고-연예인, 인지도 저-전문가, 인지도 저-연예인)과 홍보대사의 공신력, 메시지 신뢰도, 조직에 대한 태도, 후원 행동의도를 종속변수로 하는 2×2 요인설계를 사용하여 분석결과 홍보대사의 공신력에 대한 홍보대사 유형에는 통계적으로 유의미하였고, 메시지신뢰도에 대한 홍보대사 유형에는 통계적으로 유의미하였다. 하지만 홍보대사 유형에 따른 조직에 태도에는 유의미하지 않았다. 마지막으로 홍보대사의 유형에 따른 공중의 후원 행동의도에는 통계적으로 유의미함을 확인하였다.

• 대한화학회지
• /
• 제28권1호
• /
• pp.47-53
• /
• 1984

DTPA 용리액의 pH와 농도를 변화시키면서 음이온 교환수지관을 이용해서 희토류 원소들을 분리하는 연구를 하였다. 희토류 원소들의 가장 좋은 분리조건은 0.025M DTPA, pH 8.35이 있었으며 희토류 원소들의 용리순서는 Sm을 제외하고 희토류 원소들의 원자번호 순서와 일치하였다. 0.025M DTPA, pH 8.35에서 분리한 인접 희토류 원소들의 분리값은 3.03~1.25이었으며 그중 Ce/Pr이 3.03으로 최대값을,Eu/Gd은 최소값을 각각 갖는다. 0.025M DTPA 희토류 원소들을 용리하였을 때, pH 8.0~8.6의 넓은 범위에서 비교적 좋은 분리현상을 보였다.

• 보건행정학회지
• /
• 제27권2호
• /
• pp.149-156
• /
• 2017

Background: This study was conducted to evaluate the performance of the Hierarchical Condition Category (HCC) model, identify potentially high-cost patients, and examine the effects of adding prior utilization to the risk model using Korean claims data. Methods: We incorporated 2 years of data from the National Health Insurance Services-National Sample Cohort. Five risk models were used to predict health expenditures: model 1 (age/sex groups), model 2 (the Center for Medicare and Medicaid Services-HCC with age/sex groups), model 3 (selected 54 HCCs with age/sex groups), model 4 (bed-days of care plus model 3), and model 5 (medication-days plus model 3). We evaluated model performance using $R^2$ at individual level, predictive positive value (PPV) of the top 5% of high-cost patients, and predictive ratio (PR) within subgroups. Results: The suitability of the model, including prior use, bed-days, and medication-days, was better than other models. $R^2$ values were 8%, 39%, 37%, 43%, and 57% with model 1, 2, 3, 4, and 5, respectively. After being removed the extreme values, the corresponding $R^2$ values were slightly improved in all models. PPVs were 16.4%, 25.2%, 25.1%, 33.8%, and 53.8%. Total expenditure was underpredicted for the highest expenditure group and overpredicted for the four other groups. PR had a tendency to decrease from younger group to older group in both female and male. Conclusion: The risk adjustment models are important in plan payment, reimbursement, profiling, and research. Combined prior use and diagnostic data are more powerful to predict health costs and to identify high-cost patients.