• Title/Summary/Keyword: POD analysis

Search Result 213, Processing Time 0.034 seconds

Genetic Analysis of Pod Dehiscence in Soybean

  • Kang Sung Taeg;Kim Hyeun Kyeung;Baek In Youl;Chung Moung Gun;Han Won Young;Shin Doo Chull;Lee Suk-Ha
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.50 no.4
    • /
    • pp.281-285
    • /
    • 2005
  • Pod dehiscence (PD), defined as the opening of pods along both the dorsal and ventral sutures, causes the seed to shatter in the field before harvesting and results in loss of seed yields. However, breeding for resistance to PD is difficult due to the complicated genetic behavior and environmental interaction. The objective of the present research was to analyze the genetic behavior of PD for improving the breeding efficiency of resistance to PD in soybean. PD after oven-drying the sampled pod at $40^{\circ}C$ for 24 hours was the most reliable to predict the degree of PD tested in the field. Keunolkong, a dehiscent parent, was crossed with non-dehiscent parents, Sinpaldalkong and Iksan 10. Using their $F_1\;and\;F_2$ seeds, PD was measured after oven drying the pod at $40^{\circ}C$ for 24 hours. The gene conferring PD behaved in different manners depending on the genetic populations. In the Keunolkong$\times$Sinpaldalkong population, PD seemed to be governed by single major recessive gene and minor genes, while several genes were probably involved in the resistance to pod dehiscence in the Keunolkong$\times$Iksan 10 population. Heritability for PD estimated in F2 population showed over $90\%$ in the two populations. High heritability of PD indicated that selection for resistance to PD should be effective in a breeding program. In addition, genetic mapping of quantitative locus (QTL) for PD in both populations may reveal that genes conferring PD are population-specific.

Dynamic Characteristics Analysis of the Cryogenic Nitrogen Injection of Swirl Injector using POD and DMD (POD와 DMD를 이용한 와류형 분사기의 극저온 질소 분무 동적 특성 분석)

  • Kang, Jeongseok;Sung, Hong-Gye;Sohn, Chae Hoon
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.21 no.5
    • /
    • pp.1-9
    • /
    • 2017
  • The cryogenic nitrogen spray of a swirl injector has been numerically investigated using three dimensional LES turbulence model to analyze the dynamic characteristics under supercritical condition. To predict the precise nitrogen properties under supercritical condition, SRK equation of state, Chung's method for viscosity and thermal conductivity and Takahashi's correlation based on Fuller's theory for diffusion coefficient are implemented. The complex flow structures due to interaction between flow field and acoustic field are observed inside and outside the injector under supercritical condition. FFT, POD, and DMD techniques are employed to understand the coherent structures. By implementing the FFT, the dominant frequencies are identified inside and outside the injector. The coherent flow structures related to the dominant frequencies are visualized using the POD and DMD techniques. In addition, the DMD provides the damping coefficient which is related with the instability prediction.

Efficient Analysis of the Aerodynamic Characteristics of Rotor Blade Using a Reduced Order Model Based on Proper Orthogonal Decomposition Method (적합직교분해를 이용한 로터 블레이드의 차수축소모델 구축 및 공력특성 분석)

  • Jung, Sung-Ki;Duc, NgoCong;Yang, Young-Rok;Cho, Tae-Hwan;Myong, Rho-Shin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.11
    • /
    • pp.1073-1079
    • /
    • 2009
  • The proper orthogonal decomposition (POD) method can identify principal modes that optimally capture the energy content from large multi-dimensional data set. In this study unsteady pressure fields on the rotor blade surface of a helicopter in forward flight are expressed by a reduced order model based on the POD method. Special modes containing high energy are analyzed to investigate the aerodynamic characteristics in more efficient way. The CFD simulation of flowfields around helicopter rotor blade in hovering motion is also conducted to validate its prediction with experimental result. In the process 7 modes containing energy ratio 99% from 240 snapshots information are identified and utilized to construct a reduced order model.

Risk Assessment on Anastomotic Leakage after Rectal Cancer Surgery: An Analysis of 753 Patients

  • Yang, Liu;Huang, Xin-En;Zhou, Jian-Nong
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.14 no.7
    • /
    • pp.4447-4453
    • /
    • 2013
  • Purpose: To investigate the risk factors for anastomotic leakage (AL) after anterior resection for rectal cancer with a double stapling technique. Patients and Methods: Between January 2004 and December 2011, 753 consecutive patients in Jiangsu Cancer Hospital and Research Institute diagnosed with rectal cancer and undergoing anterior resection with a double stapling technique were recruited. All patients experienced a total mesorectal excision (TME) operation. Additionally, decrease of postoperative tumor supplied group of factors (TSGF), which have not been reported before, was proposed as a new indicator for AL. Univariate and multivariate analysis were performed to determine risk factors for AL. Results: AL was detected in 57 (7.6%) of 753 patients with rectal cancer. The diagnosis of anastomotic leakage was confirmed between the 6th and 12th postoperative day (POD; mean 8th POD). After univariate analysis and multivariate analysis, age (p<0.001), gender (p=0.002), level of anastomosis (p<0.001), preoperative body mass index (BMI) (p=0.001) and reduction of TSGF in 5th POD was less than 10 ${\mu}/ml$ (p<0.001) were selected as 5 independent risk factors for AL. It was also indicated that a temporary defunctioning transverse ileostomy (p=0.04) would decrease the occurrence of AL. Conclusion: AL after anterior resection for rectal carcinoma is related to elderly status, low level site of the tumor (below the peritoneal reflection), being male, preoperative BMI and the decrease of TSGF in $5^{th}$ POD is less than 10 ${\mu}/ml$. Preventive ileostomy is advisable after TME for low rectal tumors to prevent AL.

Wind loads on fixed-roof cylindrical tanks with very low aspect ratio

  • Lin, Yin;Zhao, Yang
    • Wind and Structures
    • /
    • v.18 no.6
    • /
    • pp.651-668
    • /
    • 2014
  • Wind tunnel tests are conducted to investigate the wind loads on vertical fixed-roof cylindrical tanks with a very low aspect ratio of 0.275, which is a typical ratio for practical tanks with a volume of $100,000m^3$. Both the flat-roof tank and the dome-roof tank are investigated in present study. The first four moments of the measured wind pressure, including the mean and normalized deviation pressure, kurtosis and skewness of the pressure signal, are obtained to study the feature of the wind loads. It is shown that the wind loads are closely related to the behavior of flow around the structure. For either tank, the mean wind pressures on the cylinder are positive on the windward area and negative on the sides and the wake area, and the mean wind pressures on the whole roof are negative. The roof configurations have no considerable influence on the mean pressure distributions of cylindrical wall in general. Highly non-Gaussian feature is found in either tank. Conditional sampling technique, envelope method, and the proper orthogonal decomposition (POD) analysis are employed to investigate the characteristics of wind loads on the cylinder in more detail. It is shown that the patterns of wind pressure obtained from conditional sampling are similar to the mean pressure patterns.An instantaneous pressure coefficient can present a wide range from the maximum value to the minimum value. The quasi-steady assumption is not valid for structures considered in this paper according to the POD analysis.

A Study for Assessing Pain Intensity and Investigating Factors of Satisfaction with Postoperative Pain Management (복부 수술 환자의 통증 정도 및 통증관리 만족도 영향 요인 - 통증 자가조절기 사용 환자를 중심으로 -)

  • Lee, Jong Kyung
    • Korean Journal of Adult Nursing
    • /
    • v.18 no.1
    • /
    • pp.125-135
    • /
    • 2006
  • Purpose: The purpose of this study was to identify pain intensity according to activities over postoperative days and to identify factors of patient satisfaction with pain management after abdominal surgery. Methods: The subjects were 123 patients who were admitted at a general surgical ward and had abdominal surgery from Mar. 2005 to June 2005. The collected data were analyzed using the SPSS 12.0 program. Results: The average postoperative pain scores were 6.13 at POD 1, 5.46 at POD 2, and 4.22 at POD 3. In stepwise multiple regression analysis a total of 40% of variance in satisfaction with pain management was accounted for by pain intensity on POD 3 at rest (29.4%) and attitude toward using pain medicine (6.6%), and side effects of pain medicine (4.0%). Conclusion: According to the findings of this study, patients had inadequate pain management after abdominal surgery. Therefore, nurses need to provide educational programs focused on changing attitudes toward using pain medicine, to reduce side effects of pain medicine, and to develop nursing intervention for relieving pain.

  • PDF

Performance Test of Pod-type Waterjet Propulsion System (Pod형 물분사 추진장치 성능시험 연구)

  • Kim, K.S.;Song, I.H.;Ahn, J.W.;Moon, I.S.
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.34 no.4
    • /
    • pp.21-30
    • /
    • 1997
  • This paper describes the experimental method of a pod-type waterjet propulsion system in a towing tank and shows the experimental analysis and test results of a designed waterjet propulsion system to be used for a hybrid high speed craft. The cruising performance of this craft is estimated from the results of the hull resistance test and waterjet test under the assumption that the interaction between the hull and the inlet pod is very small. A pod-type waterjet system with an axial pump was designed and a stand-alone waterjet experimental system was developed. Useful data such as the pump performance, the jet efficiency, the losses of inlet duct and nozzle were obtained. Test results show a good agreement with the design requirement.

  • PDF

Simulation of large wind pressures by gusts on a bluff structure

  • Jeong, Seung-Hwan
    • Wind and Structures
    • /
    • v.7 no.5
    • /
    • pp.333-344
    • /
    • 2004
  • This paper illustrates application of the proper orthogonal decomposition (POD) and the autoregressive (AR) model to simulate large wind pressures due to gusts on a low-rise building. In the POD analysis, the covariance of the ensemble of large wind pressures is employed to calculate the principal modes and coordinates. The POD principal coordinates are modeled using the AR process, and the fitted AR models are employed to generate the principal coordinates. The generated principal coordinates are then used to simulate large wind pressures. The results show that the structure characterizing large wind pressures is well represented by the dominant eigenmodes (up to the first fifteen eigenmodes). Also, wind pressures with large peak values are simulated very well using the dominant eigenmodes along with the principal coordinates generated by the AR models.

Post-harvest Green Pea Pod Rot Caused by Sclerotinia sclerotiorum in Korea

  • Aktaruzzaman, Md.;Afroz, Tania;Kim, Byung-Sup
    • Research in Plant Disease
    • /
    • v.28 no.1
    • /
    • pp.46-50
    • /
    • 2022
  • In June 2017, in Gangneung, Gangwon Province, South Korea, green pea pods exhibited post-harvest rot symptoms. The fungus was isolated from infected pea pods and cultured on potato dextrose agar for identification. The morphological characteristics were examined, sequences of the internal transcribed spacer region and the β-tubulin (βtub) gene were analyzed, and the pathogenicity was confirmed according to Koch's postulates. The morphology, phylogenetic analysis, and pathogenicity tests confirmed that Sclerotinia sclerotiorum was the causal agent. This study reports the first case of post-harvest green pea pod rot caused by S. sclerotiorum in Korea.

Linearized Modeling Technique for Complex Dynamic Responses Using Proper Orthogonal Decomposition (적합직교분해법을 이용한 복잡한 동적응답의 선형화 모델링 기법)

  • Lee, Soo-Il;Hong, Sang-Hyuk
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2008.04a
    • /
    • pp.156-159
    • /
    • 2008
  • Proper orthogonal decomposition is a statistical pattern analysis technique for finding the dominant components, called the proper orthogonal modes, in ensembles of spatially distributed data. We present recent ideas based on proper orthogonal decomposition (POD) and detailed experiments that yield new perspectives into the microscale structures. The linearized modeling technique based on POD is very useful to show the principal characteristics of the complex dynamic responses.

  • PDF