1 |
Portela, G. and Godoy, L.A. (2005b), "Wind pressures and buckling of cylindrical steel tanks with a conical roof", J. Constr. Steel Res., 61(6), 808-824.
DOI
ScienceOn
|
2 |
MacDonald, P.A., Kwok, K.C.S. and Holmes, J.D. (1988), "Wind loads on circular storage bins, silos and tanks: I. Point pressure measurements on isolated structures", J. Wind Eng. Ind. Aerod., 31, 165-187.
DOI
|
3 |
Godoy, L.A. and Jaca, R.C. (2010), "Wind buckling of metal tanks during their construction", Thin Wall. Struct., 48(6), 453-459.
DOI
|
4 |
Holroyd, R.J. (1983), "On the behaviour of open-topped oil storage tanks in high winds. Part I. Aerodynamic aspects", J. Wind Eng. Ind. Aerod., 12(3), 329-352.
DOI
|
5 |
Koo, C., Uematsu, Y., Kondo, K. and Okubo, K. (2010), "Wind Loads for designing open-topped oil storage tanks", Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium: Spatial Structures - Permanent and Temporary, Shanghai, China, November.
|
6 |
Maher, F.J. (1966), "Wind loads on dome-cylinders and dome-cone shapes", J. Struct. Div. - ASCE, 91(3), 79-96.
|
7 |
Myers, P. (1997), Aboveground storage tanks, McGraw-Hill, New York, American.
|
8 |
Portela, G. and Godoy, L.A. (2005a), "Wind pressures and buckling of cylindrical steel tanks with a dome roof", J. Constr. Steel Res., 61(6), 786-807.
DOI
|
9 |
National Standard of P. R. China (2012), Load code for the design of building structures, Beijing, China.
|
10 |
Purdy, D.M, Maher, P.E, Frederick, D. (1967), "Model studies of wind loads on flat-top cylinders", J. Struct. Div. - ASCE, 93, 379-395.
|
11 |
Rotter, J.M. (2009), "Silos and tanks in research and practice: state of the art and current challenges", Proceedings of Symposium on Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, IASS. Valencia, Spain, September.
|
12 |
Sosa, E.M. (2005), Computational buckling analysis of cylindrical thin-walled aboveground tanks, Ph.D. Dissertation, University Of Puerto Rico, Mayaguez Campus, Mayaguez.
|
13 |
Sabransky, I.J. and Melbourne, W.H. (1987), "Design pressure distribution on circular silos with conical roofs", J. Wind Eng. Ind. Aerod., 26(1), 65-84.
DOI
|
14 |
Sun, Y., Wu, Y. and Lin, Z. et al. (2007), "Non-Gaussian features of fluctuating wind pressures on long span roofs", China Civil Eng. J., 40(4), 1-5. (In Chinese)
|
15 |
Uematsu, Y., Koo, C. and Kondo, K. (2008),"Wind loads on open-topped oil-storage tanks", Proceedings of the 6th International Colloquium on Bluff Body Aerodynamics and Application, Milan, Italy, July.
|
16 |
Chatterjee, A. (2000), "An introduction to the proper orthogonal decomposition", Current Science, 78(7), 808-817
|
17 |
Godoy, L.A (2007), "Performance of storage tanks in oil facilities following hurricanes katrina and rita", J. Perform. Constr. Fac., 21(6), 441-449.
DOI
|