• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.221-229
• /
• 2003

Interior permanent magnet synchronous motor (IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. The paper is proposed maximum torque control of IPMSM for electric vehicle drive. The control method is applicable over the entire speed range and considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current ${^i}_d$ for maximum torque operation is derived. The proposed control algorithm is applied to IPMSM drive system for electric vehicle drive, the operating characteristics controlled by maximum torque control are examined in detail by simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.635-641
• /
• 2016

In many industrial applications that use the electric motors robust controllers are needed. The method using a neural network in order to design a robust controller when a disturbance occurs is studied. Backpropagation algorithm, which is used in a conventional neural network controller is used in many areas, but when the number of neurons in the input layer, hidden layer and output layer of the neural network increases the processing speed of the learning process is slow. In this paper an adaptive PI(Proportional and Integral) controller based on CTRNN(Continuous Time Recurrent Neural Network) for permanent magnet synchronous motors is presented. By varying the load and the speed the validity of the proposed method is verified through simulation and experiments.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.126-128
• /
• 2004

This paper investigates an improved sliding mode observer for the speed sensorless control of a permanent magnet synchronous motor. The proposed control strategy is the sliding mode observer with a variable boundary layer for a low-chattering and fast-response control. The proposed algorithm is verified through the simulation and experimentation.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.123-124
• /
• 2015

본 논문에서는 동기전동기(PMSM: Permanent Magnet Synchronous Motor)의 고정자 형상 변화를 통한 코깅토크(Cogging Torque)와 토크리플(Torque Ripple)저감에 대해 다루고자 한다. 고정자의 치의 두께와 길이에 변화를 주면서 FEM(Finite Elements Method)기반의 성능분석을 실시하여 각 형태에 대한 평균토크, 토크리플, 코깅토크를 분석, 비교해보았다.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.332-335
• /
• 1990

A digital phase-locked loop speed control system of a self-controlled permanent magnet synchronous mortar fed by a voltage source inverter is presented. This paper discribes the hardware and software design of the system. Variable speed control system for self-controlled permanent magnet synchronous motor is proposed. Simulation results demonstrate the validity of proposed methods. This proposed control technique is implemented by using a microprocessor-based system.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.410-411
• /
• 2018

매입형 영구자석 동기전동기(Interior Permanent Magnet Synchronous Motor, IPMSM)는 효율이 높고 출력밀도가 크며 고속에서의 동특성이 뛰어나 순시 토크 제어가 요구되는 고성능 제어분야에 유리하다. 최근 IPMSM은 전기자동차 등의 다양한 산업분야에 응용되어 많은 연구와 관심이 집중되고 있다. 하지만 IPMSM은 구조적인 특징 때문에 리액션 토크(Reaction Torque)와 별도로 릴럭턴스 토크(Reluctance Torque)가 추가적으로 형성되어 제어 시 별도의 계산이 필요하다. 따라서 본 논문에서는 IPMSM 순시 토크 제어를 위해 릴럭턴스 토크와 리액션 토크를 제어하였고, 그 결과를 시뮬레이션을 통해 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.251-253
• /
• 2005

This paper presents a study on a current control of a PM synchronous motor which is fed by two-level voltage source inverter in the high modulation index area. In order to increase dynamic response and extend speed limit caused by voltage limit, overmodulation method is generally used. The current control in overmodulation have voltage limit. So larger voltage command than voltage limit should be diminished. In this paper, the problem conventional normalization method is analyzed and New normalization method in overmodulation region is proposed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1741-1749
• /
• 2009

It is very important to maintain the balanced output voltage waveforms under the unbalanced DC-link voltages in the four-switch three-phase inverter(FSTPI). In this paper, the improvement of output voltage waveforms is proposed with the aid of DC-link voltage ripple estimation. The proposed method can be implemented without the additional voltage sensor. The proposed method applied to the permanent magnet synchronous motor (PMSM) is simulated and experimented in order to verify its feasibility.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.394-396
• /
• 2007

In this paper proposed to neural network PI self-tuning direct controller using Error back propagation algorithm. Proposed controller applies to speed controller and current controller. Also, this built up the interface environment to drive it simply and exactly in any kind of reference, environment fluent and parameter transaction of PMSM. Neural network PI self-tuning simulator using Visual C++ and Matlab Simulation is organized to construct this environment, Built up interface has it's own purpose that even the user who don't have the accurate knowledge of Neural network can embody operation characteristic rapidly and easily.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.431-442
• /
• 2015

Dead-time element must be set into space vector pulsed width modulation signals to avoid short circuits of the inverter. However, the dead-time element distorts the output voltage vector, which deteriorates the performance of electrical machine drive system. In this paper, dead-time effect and its compensation control strategy are analyzed. Based on the analysis, the voltage distortion caused by dead-time is regarded as two disturbances imposed on dq axes in the rotor reference frame, which degenerates the current tracking performance. To inhibit the adverse effect caused by the dead-time, a control scheme using two linear extended state observers is proposed. This method provides a strong ability to suppress dead-time effects. Simulations and experiments are conducted on a permanent magnet synchronous motor drive system to demonstrate the effectiveness of the proposed method.