• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.87-95
• /
• 1996

We have studied the effects of La concentration on the optical and electrical properties of lead lanthanum titanate (PLT) thin films by using sol-gel method. Both the optical and electrical properties are greatly affected by the La concentration. The refreactiv eindices of the films varied from 2.23 to 1.93 with varying La concentration in the range from 15 to 33 mol%. The dielectric constants of the films vary form 340 to 870 with varying La concentration in the range form 15 to 33 mol%. Hysteresis loop becomes slimmer with the increase of La concentration form 15 to 28mol% and little fatter again with the increase of La concentration form 28 to 33 mol%. Among the films investigated in this research, PLT(28) thin film shows the best dielectric properties for the application to the dielectrics of ULSI DRAM's. At the frequency of 100Hz, the dielectric constant and the loss tangent of PLT(28) thin films are 940 and 0.08 respectively. Its leakage current density at 1.5${\times}10^{5}$V/cm is 1${\times}10^{-6}A/cm^{2}$. The comparision between the simulated and the experimental curves for the switching transient characteristics shows that PLT (28) thin films behaves like normal dielectrics.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.603-608
• /
• 2006

In this paper, principal concepts on bi-directional pile load test(BD PLT) specification were explained. These main concepts are kinds of BD PLT, loading capacity, reporting the test results to relevant association etc.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.1046-1049
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.377-384
• /
• 2008

In the bi-directional pile load test (BD PLT) for pile load test of Mega foundation, loading capacity specification were not specified exactly. Therefore there are so many confusions and variations of maximum 2 times in loading capacity are come out. In this study, specifications of bi-directional pile load test (BD PLT) were considered. Based on cases of the bi-directional pile load test performed in domestic areas, maximum equivalent test load, test load increasing ratio and sufficiency ratio of design load were analyzed. It can be known that the loading capacity specification of bi-directional pile load test must be defined as 1-directional test load that is established as more than 2 times of design load.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1309-1311
• /
• 1998

$Pb_{1-x}La_xTi_{1-x/4}O_3$ (PLT(x)) thin film has been regarded as one of the most promising materials for applications of sensor, optic devices, and memory devices, because it exhibits various properties as changing the amount of Lanthanum component. So we have prepared PLT thin films on platinized silicon (actually Pt/Ti/$SiO_2$/Si) substrates in oxygen ambient by laser ablation. Energy dispersive X-ray (EDX) revealed that the stoichiometric thin films were fabricated.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.59-64
• /
• 1998

Pt/SiO2/Si 기판구조위에 스크린인쇄법과 졸-겔법에 의해 (Pb, La)TiO3(PLT) 후막 과 박막을 도포시켜 $650^{\circ}C$후속열처리 온도에서 결정화한후 결정특성과 전기적 특성을 조사 하였다. $650^{\circ}C$ 온도에서 후속열처리된 PLT 시료의 경우 전형적인 perovskite 결정구조를 보 여주었다. SEM 단면형상으로부터 Pt 전극과 PLT막 사이에는 비교적 평활한 계면형상을 보여주었다. PLT 후막과 박막시료의 잔류분극(2Pr) 값은 약 1$\mu$C/cm2 으로각각 나타났으며 이와같이 후막 PLT시료에 비해 박막시료의 잔류분극값이 큰이유는 박막시료가 보다 양호 한 결정성을 지니기 때문이었다. 상온부근에서 후막과 박막시료의 초전계수값은 약 1.5nC/cm2.$^{\circ}C$와 4.0nC/cm2.$^{\circ}C$의 값을 각각 나타내었으며 누설전류의 크기는 약 0.3~0.8$\mu$ A/cm2의 비교적 양호한 누설전류 특성을 얻었다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.518-525
• /
• 2009

The bi-directional high pressure pile load test(BDH PLT) which is a kind of pile load tests was conducted to find out a reasonable design procedure of large-diameter drilled shafts of large-size building structures. The behaviors of bearing capacity and settlement of the large-diameter drilled shafts were analyzed and the results obtained from BDH PLT were also compared with those obtained from the equations suggested in the specification. In case of the reasonable design procedure adopted, the construction cost could be saved at least 15 ~ 28%. It could be concluded that BDH PLT should be needed for the foundation construction cost reduction of the high-rise building structures.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.698-701
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.48-51
• /
• 1997

(Pb. La)TiO$_3$ thin films were fabricated by sol-gel Processing and spin-coated on the Pt substrate. The spin-coated PLT films were sintered at 75$0^{\circ}C$ for 5min by rapid thermal ann La content dependence of the electrical properties of the PLT thin films are discussed. Wit La mole% from 20 to 36mo1e%. the dielectric constant of the PLT thin films decreased f 570. P-E hysteresis loops changed from ferroelectric to paraelectric. and the charge storage charging time decreased. The Curie Point decreased with increasing La content. The leak density also decreased and La 36mo1% species shows mood characteristics less than 10- electric field 500 (KV/cm) Because of the broad range of composition-controlled ferroelectric PLT thin films are suitable for memory application.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.378-381
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.