• Korean Journal of Computational Design and Engineering
• /
• v.14 no.1
• /
• pp.60-68
• /
• 2009

Because of the reduced product life-cycle, industries are making an effort to bring down the process planning time. In the traditional approach, we have to analyze established process planning, then design the time chart based on process information and drawing the formal time chart such as SOP(sequence of operation). Thereafter, it will be converted to PLC code that is a time consuming and redundant job. Similarly, Industrial automated process uses PLC Code to control the factory; however, control information and control code(PLC code) are difficult to understand. Hence, industries prefer writing new control code instead of using the existing one. It shows the lack of information reusability in the existing process planning. As a result, to reduce this redundancy and lack of reusability, we propose SOS-Net modeling method. Unlike past stabilized process planning that is rigid to any change; our proposed SOS-Net modeling method is more adaptable to the new changes. The SOS-Net model is easy to understand and easy to convert into PLC Code accordingly. Therefore, we can easily modify the control information and reuse it for new process planning. The proposed model plays an intermediary role between process planning and PLC code generation. It can reduce the process planning and implementation time as well as cost.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.105-108
• /
• 2001

In this paper, "The PLC Controlling on Web Browser" is designed and implemented to remote control and to monitor FA system. Protocol bidirectional communication with PLC is written and sotted. Then Administration system sets Web server and JAVA Sevelet Program. The client system located at the monitoring Web browser are a JAVA Sevelet base system, and sends some commands to the server system which guards and controls the PLC system. The commands are delivered to the server system and the driver software exists in the server controls the PLC system directly.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.4 s.304
• /
• pp.1-10
• /
• 2005

Recently, most of PLC has been using widely in automation equipment that is needed for field of industry automation. HMI is essential system for effective Control of many numbers of PLC. Even though early HMI system was consists of simple analog devices, however, HMI system could control or supervise PLC through display screen since it embeds various digital parts by development of technology in these days. HMI system consists of three parts as HMI hardware, an operating program for HMI equipment and a HMI screen editor. Among these elements, a Program for editing screen of HMI should provide various screen elements that helps users to edit each screens displayed on HMI. In this study, we design and implement screen edit program by object-oriented method for small HMI equipment and propose Prototype of embedded HMI system.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3067-3069
• /
• 1999

In this paper, A bit processor for controlling sequence logic was implemented, using a FPGA. This processor consists of program memory interface. I/O interface, parts for instruction fetch and decode, registers, ALU, program counter and etc. This FPGA is able to execute sequence instruction during program fetch cycle, because of divided bus system, program bus and data bus. Also this bit processor has instructions set that 16bit or 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package. Finally, the benchmark was performed to prove that Our FPGA has better performance than DSP(TMS320C32-40MHz) for the sequence logic control of PLC.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1110-1115
• /
• 1991

Tne mathematical modeling and analysis results of a dataflow logic solving processor(DFLSP) for programmable logic controller(PLC) are proposed in this paper. The logic program language is formalized using a dataflow graph model. From this dataflow graph, the instruction precedence relationship, and deadlock problems, which are major properties of a logic program, are described.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2750-2752
• /
• 2000

In this paper, Intelligent PLC for automatic warehousing system is presented. Intelligent PLC is that general PLC is incorporate the knowledge and experience of Expert and control method. This system is consist of sensor part, inference part and automatic warehousing robot part. this system recognize the Work by itself and move it to the appointed place according to the inference rule. The PLC program is constructed by LD(ladder diagram). Real test system was constructed and was driven to apply this program.

• IE interfaces
• /
• v.21 no.3
• /
• pp.294-301
• /
• 2008

Agile and flexible manufacturing systems make it mandatory that a control program should have features such as agility, flexibility, and reusability in order to run manufacturing unit smoothly. PLCs are the most frequently used control program in manufacturing systems. PLC programs are mostly programmed by subcontraction, which makes correction of code very difficult. As a result, it may cause delay during down time and ramp up time which leads to big loss of revenue and goodwill. To prevent delay during the times, this paper proposes systematic process analysis and application method for programmable logic controller like LLD (Ladder Logic Diagram). The proposed method uses modified human-error investing techniques for documentation and transforming technique to program LLD from the documentation. Furthermore, this paper demonstrates an example of piston mechanism to explain the proposed method.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.1-11
• /
• 2009

This paper illustrates a case study of PLC logic simulation in a car manufacturing system. It was developed to simulate and verify PLC control program for automobile panel AS/RS. Because car models become varied, the complexity of supply problem is increasing in the car manufacturing system. To cope with this problem, companies use the AS (automated storage) and RS (retrieval system) but it has logical complexity. Industrial automated process uses PLC code to control the AS/RS, however control information and control codes (PLC code) are difficult to understand. This paper suggests a PLC simulation environment, using 3D models and PLC code with realistic data. Data used in this simulation is based on realistic 3D model and I/O model, using actual size and PLC signals, respectively. The environment is similar to a real factory; users can verify and test the PLC code using this simulation before the implementation of AS/RS. Proposed simulation environment can be used for test run of AS/RS to reduce implementation time and cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.107-112
• /
• 2010

When we design the control system used Programmable Logic controller(PLC), if we program a Sequential Function Chart(SFC), It is easy to understand the sequential flow of control, to maintenance the controller and to describe a program. SFC language is programmed by a single sequence, a select sequence and a parallel sequence. In a select sequence, when the select step is error, the whole process is stopped. If the error step has no connection the whole process, the loss is down when we debugging the program without stopping the whole process. Therefore, this thesis shows the efficient method of remote control for select sequence and we confirmed its feasibility through actual example.