• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.41-43
• /
• 1999

Among the feffoelectric thin films that have been widely investigated for ferroelectric random access memory (FRAM) applications, SrBi$_2$Ta$_2$$O_{9}$ thin film is appropriate to memory capacitor materials for its excellent fatigue endurance. However, very few studies on etch properties of SBT thin film have been reported although dry etching is an area that demands a great deal of attention in the very large scale integrations. In this study, the a SrBi$_2$Ta$_2$$O_{9}$ thin films were etched by using magnetically enhanced inductively coupled Ar/CHF$_3$ plasma. Etch properties, such as etch rate, selectivity, and etched profile, were measured according to gas mixing ratio of CHF$_3$(Ar$_{7}$+CHF$_3$) and the other process conditions were fixed at RF power of 600 W, dc bias voltage of 150 V, chamber pressure of 10 mTorr. Maximum etch rate of SBT thin films was 1750 A77in, under CHF$_3$(Ar+CHF$_3$) of 0.1. The selectivities of SBT to Pt and PR were 1.35 and 0.94 respectively. The chemical reaction of etched surface were investigated by X-ray photoelectron spectroscopy (XPS) analysis. The Sr and Ta atoms of SBT film react with fluorine and then Sr-F and Ta-F were removed by the physical sputtering of Ar ion. The surface of etched SBT film with CHF$_3$(Ar+CHF$_3$) of 0.1 was analyzed by secondary ion mass spectrometer (SIMS). Scanning electron microscopy (SEM) was used for examination of etched profile of SBT film under CHF$_3$(Ar+CHF$_3$) of 0.1 was about 85˚.85˚.˚.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.373-378
• /
• 2015

The structure of the human ear is divided into the outer ear, the middle ear, and the inner ear. The inner ear includes the cochlea that plays a very important role in hearing. Recently, the development of an artificial cochlear device for the hearing impaired with cochlear damage has been actively researched. Research has been carried out on the biomimetic piezoelectric thin film ABM (Artificial Basilar Membrane) in particular. In an effort to improve the frequency separation performance of the existing piezoelectric thin film ABM, this paper presents the design, fabrication, and characterization of the production and performance of a partially etched-type ABM material. $O_2$ plasma etching equipment was used to partially etch a piezoelectric thin film ABM to make it more flexible. The mechanical-behavior characterization of the manufactured partially etched-type ABM showed that the overall separation frequency range shifted to a lower frequency range more suitable for audible frequency bandwidths and it displayed an improved frequency separation performance. In addition, the maximum magnitude of the vibration displacement at the first local resonant frequency was enhanced by three times from 38 nm to 112 nm. It is expected that the newly designed, partially etched-type ABM will improve the issue of cross-talk between nearby electrodes and that the manufactured partially etched-type ABM will be utilized for next-generation ABM research.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.161-168
• /
• 1998

Reactive ion etching process for InGaAs/InP using the CH4/H2 high density inductively coupled plasma was investigated. The experimental design method proposed by Taguchi was utilized to cover the whole parameter range while maintaining reasonable number of actual experiments. Results showed that the ICP power mainly affects surface roughness and verticality of the sidewall, bias power does etch rate and verticality, CH4 gas concentraion does the verticality and etch rate, and the distance between the induction coil and specimen mostly affects the surface roughness. It was also observed that the chamber pressure is the dominant parameter for the etch rate and verticality of the sidewall. The optimum condition was ICP power 700W, bias power 150 W, 15% $CH_4$, 7.5 mTorr, and 14 cm distance, resulting in about 3 $\mu\textrm{m}$/hr etch rate with smooth surfaces and vertical mesa sidewalls.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.458-458
• /
• 2010

The process window for the etch selectivity of silicon nitride ($Si_3N_4$) layers to extreme ultra-violet (EUV) resist and variation of line edge roughness (LER) of EUV resist were investigated durin getching of $Si_3N_4$/EUV resist structure in a dual-frequency superimposed capacitive coupled plasma (DFS-CCP) etcher by varying the process parameters, such as the $CH_2F_2$ and $N_2$ gas flow rate in $CH_2F_2/N_2$/Ar plasma. The $CH_2F_2$ and $N_2$ flow rate was found to play a critical role in determining the process window for infinite etch selectivity of $Si_3N_4$/EUV resist, due to disproportionate changes in the degree of polymerization on $Si_3N_4$ and EUV resist surfaces. The preferential chemical reaction between hydrogen and carbon in the hydrofluorocarbon ($CH_xF_y$) polymer layer and the nitrogen and oxygen on the $Si_3N_4$, presumably leading to the formation of HCN, CO, and $CO_2$ etch by-products, results in a smaller steady-state hydrofluorocarbon thickness on $Si_3N_4$ and, in turn, in continuous $Si_3N_4$ etching due to enhanced $SiF_4$ formation, while the $CH_xF_y$ layer is deposited on the EUV resist surface. Also critical dimension (and line edge roughness) tend to decrease with increasing $N_2$ flow rate due to decreased degree of polymerization.

• Journal of Surface Science and Engineering
• /
• v.36 no.4
• /
• pp.334-338
• /
• 2003

$BCl_3$고밀도 평판형 유도결합 플라즈마(High Density Planar Inductively Coupled Plasma)를 이용하여 AlGaAs와 InGaP의 건식식각에 대하여 연구하였다. 본 실험에서는 ICP 소스파워(0∼500 W), RIE 척 파워(0-150 W), 공정압력(5∼15 mTorr)의 변화에 따른 AlGaAs와 InGaP의 식각률, 식각단면 그리고 표면 거칠기 등을 분석 하였다. 또, 공정 중 OES(Optical Emission Spectroscopy)를 이용하여 in-situ로 플라즈마를 관찰하였다. $BCl_3$ 유도결합 플라즈마를 이용한 AlGaAs의 식각결과는 우수한 수직측벽도와(>87$^{\circ}$) 깨끗하고 평탄한 표면(RMS roughness = 0.57 nm)을 얻을 수 있었다. 반면, InGaP의 경우에는 식각 후 표면이 다소 거칠어진 것을 확인할 수 있었다. 모든 공정조건에서 AlGaAs의 식각률이 InGaP보다 더 높았다. 이는 $BCl_3$ 유도결합 플라즈마를 이용하여 InGaP을 식각하는 동안 $InCl_{x}$ 라는 휘발성이 낮은 식각부산물이 형성되어 나타난 결과이다. ICP 소스파워와 RIE 척파워가 증가하면 AlGaAs와 InGaP모두 식각률이 증가하였지만, 공정압력의 증가는 식각률의 감소를 가져왔다. 그리고 OES peak세기는 공정압력과 ICP 소스파워의 변화에 따라서는 크게 변화하였지만 RIE 척파워에 따라서는 거의 영향을 받지 않았다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2008

We studied plasma etching of polycarbonate in $O_2/SF_6$, $O_2/N_2$ and $O_2/CH_4$. A capacitively coupled plasma system was employed for the research. For patterning, we used a photolithography method with UV exposure after coating a photoresist on the polycarbonate. Main variables in the experiment were the mixing ratio of $O_2$ and other gases, and RF chuck power. Especially, we used only a mechanical pump for in order to operate the system. The chamber pressure was fixed at 100 mTorr. All of surface profilometry, atomic force microscopy and scanning electron microscopy were used for characterization of the etched polycarbonate samples. According to the results, $O_2/SF_6$ plasmas gave the higher etch rate of the polycarbonate than pure $O_2$ and $SF_6$ plasmas. For example, with maintaining 100W RF chuck power and 100 mTorr chamber pressure, 20 sccm $O_2$ plasma provided about $0.4{\mu}m$/min of polycarbonate etch rate and 20 sccm $SF_6$ produced only $0.2{\mu}m$/min. However, the mixed plasma of 60 % $O_2$ and 40 % $SF_6$ gas flow rate generated about $0.56{\mu}m$ with even low -DC bias induced compared to that of $O_2$. More addition of $SF_6$ to the mixture reduced etch of polycarbonate. The surface roughness of etched polycarbonate was roughed about 3 times worse measured by atomic force microscopy. However examination with scanning electron microscopy indicated that the surface was comparable to that of photoresist. Increase of RF chuck power raised -DC bias on the chuck and etch rate of polycarbonate almost linearly. The etch selectivity of polycarbonate to photoresist was about 1:1. The meaning of these results was that the simple capacitively coupled plasma system can be used to make a microstructure on polymer with $O_2/SF_6$ plasmas. This result can be applied to plasma processing of other polymers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.297-305
• /
• 2000

It is observed that the initial properties and degradation characteristics on plasma of n/p-MOSFET with polycide and poly-Si as different gate materials under F-N stress and hot electron stress are affected by metal AR(Antenna Ratio) during plasma process. Compared to that of MOS devices with poly-Si gate material, reliability properties on plasma of MOS devices with polycide gate material are improved. This can be explained by that fluorine of tungsten polycide process diffuses through poly-Si into gate oxide and results in additional oxide thickness. The fact that MOS devices with polycide gate material can reduce damages of plasma process shows possibility that polycide gate material can be used as gate material for next generation MOS devices.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.496-502
• /
• 1999

In this study, n-GaN samples were etched using planar inductively coupled $Cl_2$/$H_2$plasmas and the effects of plasma conditions on the etch properties, surface composition, and ohmic contact formation were investigated as a function of gas combination. As the addition of hydrogen to the $Cl_2$plasma increased to 100%, GaN etch rates decreased due to the reduction of chlorine radical density. Even though the variation of the surface composition is limited under $50\AA$, the surface composition was also changed from Ga-rich to N-rich with the increased addition of hydrogen to $Cl_2$. Etch products by the reaction between Ga in GaN and Cl in $Cl_2$ plasma were investigated using OES analysis during the GaN etching. The value of specific resistivity of the contact formed on the n-GaN etched using 100% $Cl_2$plasma was 3.1$\times$10\ulcorner$\Omega$$\textrm{cm}^2$, and which was lower than that formed on the non-etched n-GaN. However, the resistively was increased with the increased hydrogen percent in $Cl_2$/$H_2$.

• Journal of the Korean Vacuum Society
• /
• v.6 no.1
• /
• pp.91-96
• /
• 1997

The electrical characteristics and the plasma parameters of planar inductively coupled plasmas (ICP) have been measured. The resistance of the total load including the coil and the plasma varied from 1 to 4 W and the inductance from 1.5 m to 2 mH when the power was changed from 100 to 1000 W and the pressure from 1 to 10 mTorr. The density of electron measured by Langmuir probe was over $10^{11}/\textrm{cm}^3$ and the temperature varied between 3 and 5 eV as the process conditions were changed. Bias modulation was adopted as a new method to improve the selectivity of $SiO_2$on Si in $C_4F_8$ (octafluorocyclobutane) plasma. The selectivity was improved as the duty ratio decreased, but the etch rate of $SiO_2$decreased below 400$\AA$/min. $H_2$addition to $C_4F_8$ plasma showed that the etch selectivity could be higher than 50 and the etch rate of $SiO_2$over 2000$\AA$/min when 60% $H_2$was added.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.285-285
• /
• 2012

본 논문에서는 HBr, O2 gas를 사용하여 나노급 반도체 디바이스에 응용되는 실리콘 트렌치 패턴의 건식 식각시 중요한 인자중의 하나인 RIE (Reactive Ion Etching) Lag현상에 관하여 연구하였다. 실험에서 사용된 식각 장치는 유도 결합 플라즈마(Inductively Coupled Plasma) 식각 장치로써, Source Power및 기판에 인가되는 Bias power 모두 13.56 MHz로 구동되는 장치이며, Source Power와 Bias Power 각각에 펄스 플라즈마를 인가할 수 있도록 제작 되어있다. HBr과 O2 gas를 사용한 트렌치 식각 중 발생하는 식각 부산물인 SiO는 프로파일 제어에 중요한 역할을 함과 동시에, 표면 산화로 인해 Trench 폭을 작게 만들어 RIE lag를 심화시킨다. Br은 실리콘을 식각하는 중요한 라디칼이며, SiO는 실리콘과 O 라디칼의 반응으로부터 형성되는 식각 부산물이다. SiO가 많으면, 실리콘 표면의 산화가 많이 진행될 것을 예측할 수 있으며, 이에 따라 RIE lag도 나빠지게 된다. 본 실험에서는 Continuous Plasma와 Bias Power의 펄스, Source Power의 펄스를 각각 적용하고, 각각의 경우 Br과 SiO 라디칼의 농도를 Actinometrical OES (Optical Emission Spectroscopy) tool을 사용하여 비교하였다. 두 라디칼 모두 Continuous Plasma와 Bias Power 펄스에 의해서는 변화가 없는 반면, Source Power 펄스에 의해서만 변화를 보였다. Source Power 값이 증가함에 따라 Br/SiO 라디칼 비가 증가함을 알 수 있었고, 표면 산화가 적게 형성됨을 예측할 수 있다. 이 조건의 경우, Continuous Plasma대비 Source Power 펄스에 의하여 RIE lag가 30.9 %에서 12.8 %로 현격히 개선된 결과를 얻을 수 있었다. 또한, 식각된 실리콘의 XPS 분석 결과, Continuous Plasma대비 Source Power 펄스의 경우 표면 산화층이 적게 형성되었음을 확인할 수 있었다. 따라서, 본 논문에서는 식각 중 발생한 Br과 SiO 라디칼을 Source Power펄스에 의한 제어로 RIE lag를 개선할 수 있으며, 이러한 라디칼의 변화는 Actinometrical OES tool을 사용하여 검증할 수 있음을 보여준다.