• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1294-1296
• /
• 1998

Platinum thin films which hardly form volatile compounds with any reactive gas at normal process temperature was etched in Inductively Coupled Plasma (ICP) using Ar/HBr/$Cl_2$ gases. It is observed that the etch rate of platinum is reduced as increasing of HBr/$Cl_2$ gas mixing ratio when Ar gas ratio is fixed. However, we obtain good etching profile of platinum films without unwanted residues in 90% Ar/5% HBr/5% $Cl_2$ gas mixing ratio.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.330-333
• /
• 1999

A Schottky characteristic is one of the important properties to determine the performance of GaN electronic devices. In this paper, we have studied how to improve the property after n$^{+}$ layer etching by ICP(Induced Coupled Plasma)-RIE(Reactive ion Etching). We have tried $N_2$radiation, annealing after $N_2$radiation, and annealing in $N_2$environment. We have found that a simple annealing method in $N_2$environment is enough to improve the Schottky characteristic for electronic device-Quality application.n.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.67-67
• /
• 2009

본 연구는 강유전체 박막의 buffer 층으로 사용되는 Yttrium oxide($Y_2O_3$) 박막에 대한 $BCl_3$/Ar 혼합가스 식각 특성에 대해 연구하였다. 식각 메카니즘을 해석하기 위해 QMS(Quadrupole Mass Spectrometer), OES(Optical Emission Spectroscopy)를 사용하여 플라즈마 특성을 추출하였다. 공정 조건(source power, bias power, pressure, total gas flow)을 동일하게 유지하고 $BCl_3$/Ar 혼합가스 비율을 변화시키며 실험을 진행 하였다. 혼합가스의 비율이 $BCl_3$(80%)/Ar(20%)일때 가장 높은 식각 속도을 나타냈고, 이후 점차 감소하였다. 이때의 식각 속도는 8.8 nm/min 였다. 이에 $Y_2O_3$는 이온 보조 화학식각 특성을 가짐을 확인하였다.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1727-1732
• /
• 2008

We present a facile, yet versatile carbon nanofabrication method using electron beam lithography and resist pyrolysis. Various resist nanopatterns were fabricated using a negative electron beam resist, SAL-601, and were then subjected to heat treatment in an inert atmosphere to obtain carbon nanopatterns. Suspended carbon nanostructures were fabricated by wet-etching of an underlying sacrificial oxide layer. Free-standing carbon nanostructures, which contain 122 nm-wide, 15 nm-thick, and 2 ${\mu}m$-long nanobridges, were fabricated by resist pyrolysis and nanomachining processes. Electron beam exposure dose effects on resist thickness and pattern widening were studied. The thickness of the carbon nanostructures was thinned down by etching with oxygen plasma. An electrical biosensor utilizing carbon nanostructures as a conducting channel was studied. Conductance modulations of the carbon device due to streptavidin-biotin binding and pH variations were observed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.424-429
• /
• 2008

Surface wettability in terms of the size of the micro nano structures has been examined. To evaluate the influence of the nano structures on the contact angles, we fabricated two different kinds of structures: squarepillar-type microstructure with nano-protrusions and without nano-protrusions. Microstructure and nanostructure arrays were fabricated by deep reactive ion etching (DRIE) and reactive ion etching (RIE) processes, respectively. And plasma polymerized fluorocarbon (PPFC) was finally deposited onto the fabricated structures. Average value of the measured contact angles from microstructures with nanoprotrusions was $6.37^{\circ}$ higher than that from microstructures without nano-protrusions. This result indicates that the nano-protrusions give a crucial effect to increase the contact angle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.249-249
• /
• 2014

대면적 사각형 기판의 플라즈마 표면처리를 위한 유도 결합 플라즈마 발생 시스템의 수치 계산을 유체 모델을 이용하여 진행하였다. 연산 자원이 많이 요구되는 3차원 모델임을 감안하여 준중성 조건을 이용한 간략화 알고리즘을 사용하였다. Poisson 방정식을 풀지 않고 준중성 조건에 의한 양극성 전기장을 계산하여 이용한다. 쉬스는 모델을 이용하여 처리하였다. 1차적으로 사각 spiral 형태의 안테나를 가정하여 LCD 3세대 급의 기판을 대상으로 작성하였다. 다중 분할을 하지 않고 4개의 가지를 갖는 single spiral을 적용하였고 1.125 turn의 low impedance 구조에 대해서 계산하였다. Ar을 이용한 sputter etching 공정을 타겟으로 하여 기판에서의 Ar 이온 밀도 분포의 균일도가 어떤 설계 변수에 의해서 영향을 받는지를 중점적으로 계산하였다.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.163-167
• /
• 2013

We fabricated prototype cantilevers for mechanically detected high-frequency ESR measurement. Cantilevers are fabricated from silicon-on-insulator (SOI) wafers using standard MEMS techniques such as lithography, wet etching, and plasma etching. Using commercial SOI wafers, fabrication cost and the number of processes can be substantially reduced. In this study, three types of cantilevers, designed for capacitive and optical detection, are shown. Capacitive type with lateral dimensions of $3.5{\times}1.6mm^2$ is aimed for low spin concentration sample. On the other hand, optical detection type with lateral dimensions of $50{\times}200{\mu}m^2$ is developed for high-sensitive detection of tiny samples such as newly synthesized microcrystals.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.824-828
• /
• 2016

In this study, effects of ICP (inductively coupled plasma) treatment on PAR thin film have been investigated. A maximum etch rate of the PAR thin films and the selectivity of PAR to PR were obtained as 110 nm/minand 1.1 in the $CF_4/O_2$ (5:15 sccm) gas mixture. We present the surface properties of PAR thin film with various treatment conditions. The surface morphology and cross section of the PAR thin film was observed by AFM (atomic force microscopy) and FE-SEM (filed emission scanning electron microscopy).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.751-756
• /
• 2001

Carbon nanotubes(CNTs) was successfully grown on Ni coated silicon wafer substrate by PECVD technique(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni thin film of thickness ranging from 15∼30nm was prepared by electron beam evaporator system. In order to find the find the optimum growth condition, initially two different types of gas mixtures such as C$_2$H$_2$-NH$_3$ and C$_2$H$_2$-NH$_3$-Ar were systematically investigated by adjusting the gas mixing ratio in temperature of 600$^{\circ}C$ under 0.4 torr. The diameter of the grown CNTs was 40∼200nm. The diameter of the CNTs increases with increasing the Ni particles size. TEM images clearly demonstrated synthesized nanotubes to be multiwalled.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.276-279
• /
• 2008

We report on the enhancement of cathode-luminescence in an $In_xGa_{1-x}N/In_yGa_{1-y}$ green light emitting diode structure using two-dimensional photonic crystals. The square lattice arrays of photonic crystals with diameter/periodicity of 200/500 nm were fabricated by electron beam lithography. Inductively coupled plasma dry etching was used to etch and define photonic crystals. Three samples with different etch depths, i.e., 170, 95, and 65 nm, were constructed. Field emission scanning electron microscope analysis shows that air holes of photonic crystal structure with inverted-cone shapes were fabricated after dry etching. Cathode-luminescence measurement indicated that up to 30-fold enhancement of cathode-luminescence intensity has been achieved.