• Communications of the Korean Mathematical Society
• /
• v.22 no.2
• /
• pp.289-295
• /
• 2007

We describe some conditions under which the product of two groups with certain property is a group with the same property, and we describe some conditions under which the product of hopfian manifolds is another hopfian manifold. As applications, we find some PL fibrators among the product of fibrators.

• Korean Journal of Materials Research
• /
• v.15 no.7
• /
• pp.448-452
• /
• 2005

This study was based on organic electroluminescence display. Especially, TPD and $\alpha-NPD$ for the hole transport materials were synthesized by Ullmann reaction. This reaction was conducted between 3­methylphenylamine, 1-naphthylamine and 4,4'-diiodobiphenyl in toluene containing CuCl catalyst and KOH base. The structural property of reaction products were analyzed by FT-IR, $^1H-NMR$ spectroscopy, and thermal stability, reactivity and PL property were analyzed by melting point, yield and emission spectrum, respectively. The photoluminescence spectra of a pure TPD and $\alpha-NPD$ were observed at approximately 416nm and 438nm respectively. In this study, it was known that the melting point, yield, PL properties of TPD and $\alpha-NPD$ were changed by substituent group of amines.

• Communications of the Korean Mathematical Society
• /
• v.11 no.4
• /
• pp.1077-1085
• /
• 1996

This paper provides examples which can not be approximate fibrations and shows that if $N^n$ is a closed aspherical manifold, $\pi_1(N)$ is hyperhophian, normally cohophian, and $\pi_1(N)$ has no nontrivial Abelian normal subgroup, then the product of $N^n$ and a sphre $S^m$ satisfies the property that all PL maps from an orientable manifold M to a polyhedron B for which each point preimage is homotopy equivalent to $N^n \times S^m$ necessarily are approximate fibrations.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.179-179
• /
• 2006

PLGA/HA composite scaffold fabricated by GF/PL method showed enhanced mechanical property, hydrophilicity and osteoconductivity compared with the SC/PL scaffolds, and this enhancement was most likely due to a higher extent of exposure of HA particles to the scaffold surface. The biodegradable polymer/bioceramic composite scaffolds fabricated by the GF/PL method could enhance bone regeneration efficacy for the treatment of bone defects compared with conventional composite scaffolds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.988-993
• /
• 2004

Luminescence characteristics of Ag-doped ZnO as the quantum dot materials to increasing the efficiency on dye-sensitized solar cells (DSC) have been studied. Ag doped ZnO powder was produced by the self-sustaining combustion process using ultrasonic spraying heating method. Luminescence wavelength region of the ZnO by Ag doping was shifted to longer wavelength. Tn the case of the Ag doped ZnO powder, broad luminescence spectrum centered on 600nm was observed. On the other hand, we compared PL data of RTA treated ZnO:Ag film at various temperatures because the front electrode of solar cell was in need of the sintering process. In XRD and PL data for RTA treated film at the 500$^{\circ}C$ showed good property. And, it was found that the grain size wasn't growing but only optical property was changed. According to the result of XRD, PL, absorption, emission spectrum and DV-X${\alpha}$ used in theoretical calculation, it is considered to be possible to use Ag doped ZnO as quantum dot material for improving DSC efficiency.

• IE interfaces
• /
• v.15 no.2
• /
• pp.107-113
• /
• 2002

Recent reports studied that injuries or deaths frequently occurred in consumer product accidents by product defects. Broadly speaking, product liability is liability which is imposed upon a manufacturer or other seller for personal injury, death, property damage and/or commercial loss arising with respect to a product or service provided by it. In this study, we want to search a method of prevention against appling PL laws. The way was researching on the level of appreciation of PL law, warning messages's means and design criteria for seller or consumer of child toys. As a result, most people didn't understand PL laws. Although they read them before purchasing child toy, many consumers didn't differentiate means of "Notice", "Warning", and "Danger" in warning messages. In addition, they considered important factors in warning messages as notice warning, safety mark(UL, etc), age recommendation and color in order. This study will be effective to search a method of prevention against PL laws.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.119-122
• /
• 2001

ZnO thin films on (001) sapphire substrates have been deposited by pulsed laser deposition(PLD) technique at the oxygen pressure of 350 mTorr. In order to investigate the effect of post-annealing treatment with oxygenn pressure of 350 mTorr on the optical property of ZnO thin films, films have been annealed at various substrate temperatures after deposition. After post-annealing treatment in the oxygen ambient, the optical properties of the ZnO thin films were characterized by PL(Photoluminescence) and structural properties of the ZnO were characterized by XRD, and have investigated structural property and optical property for application of light emission device.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.11-18
• /
• 2016

Product liability (PL), which began enforcement in 2002, refers to the legal responsibility of the manufacturers or sellers (wholesales or retailers) for the property damage or bodily harm caused by their product. With a strong enforcement of the Product Liability (PL) Act, companies are required to structure and operate a response system to defend or prevent product accidents efficiently, but small and medium enterprises (SMEs) are unable to respond more aggressively due to limitation of management resources. In this manner, it is important to develop response strategies for SMEs to efficiently cope with the PL Act. In this paper, the PEST (Political, Economic, Social, and Technological) analysis is performed to reveal the impact of the PL Act on SMEs in macro-economic point of view. To formulate SME's PL response strategy, SWOT analysis is performed to categorize each factors from PEST analysis and AHP is applied to identify the intensities of SWOT factors. The prioritized SWOT factor, results of PEST-SWOT-AHP analysis, are used to formulate SME's PL response strategies. The study results are briefly summarized as follows. To reduce product defects, it is necessary for SMEs to formulate PL response strategies for each phase of the product life cycle by continuously collecting and analyzing PL cases in the same industry or for similar products. In addition, SMEs should invest more technological effort to ensure product safety. Further, SMEs should spread PL awareness to all staff members by training internal PL experts. Moreover, a SME should enroll in PL insurance and spread this information to its customers so that they become aware that the company is proactively conforming to the PL law.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.22-30
• /
• 2017

PL (Product Liability) refers to the legal responsibility of a manufacturer or seller for bodily injuries or property losses caused by product defects. Therefore, it is important for companies to construct a product liability response system that strategically manage and effectively adapt to product liability. A PL response system refers to companywide operations of PL prevention (PLP) measures, product safety (PS) measures, and PL defense (PLD) measures appropriate for a company's scale and environment. To establish an enterprise product liability response system, each essential component of corporations should be systematically operated and maintained considering the scale and characteristics of the corporations. Essential components of PL response system is Strategy, Organization, Training, Technology, Investment, and Awareness. Role of essential components is that companies need specific strategies to secure product safety and protect customers from product defects, and appropriate organizations must be composed for effective operation of such strategies. The objective of this paper seeks to examine the relationships among the essential components of the product liability response system and PL performance. PL performance consists of positive performance and negative performance. In particular, positive performance include increased efforts in product or process innovation such as strengthening research and development (R&D) to produce safer products without defects. In order to carry out this research we obtained 98 questionnaire of manufacturing company. A summary of the analyses is as follows: First, the awareness and technology among essential components affect significantly to the positive performance. Second, the awareness and strategy among essential components negative affect to the negative performance.

• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.19-36
• /
• 2003

The manager of manufacturing industry just not to have known what to do related to the law of product liability(PL) that was put into operation in July 1, 2002. The law of PL is a public law about defective product, which was established in order to compensate consumer's damages of property and body caused by product, to make sound society by the safety products and to take international competitiveness. But the existing civil law has been having clause that compensation to be taken is limited. The law of PL is resolving this limitations and is characterized by the easy relief from damages of defective product. The decision in the case of Green-man has been a precedent since the court sentenced the manufacturer to liability. The law of PL has been in force in 27 countries, including all of the EU countries, Japan, Philippines and China. It has been shown that the corporations which meet the Global Standard, could survive in global competition. The economic effects by the law of PL are the increase of consumers relief production cost by the lawsuits. This paper will recommend more biref method that is able to cover PSMS by use of QMS. It will make domestic corporation improve in the plan, manufacture and sale of products to meet the Global Standard.