• 제목/요약/키워드: PL

검색결과 2,980건 처리시간 0.029초

흰쥐 간조직의 활성산소 및 제거효소에 미치는 목초액의 영향 (Effect of Pyroligneous Liquor on Oxygen Radicals and Their Scavenger Enzymes in Liver of CD Rats)

  • 최진호;조원기
    • Journal of Nutrition and Health
    • /
    • 제40권2호
    • /
    • pp.111-117
    • /
    • 2007
  • 시판 목초액 A (원액 35%)을 사용하여 음용수에 0%, 1.0%, 25.0%, 50.0%, 75.0%가 되도록 조제한 다음, CD계 수컷 흰쥐 (150 ${\pm}$ 10 g)에 2개월 동안 조제사료와 함께 자유 음용케 하여 간조직 중의 활성산소로서 수퍼옥시드 라디칼(O$_{2}\;^-$), 히디록시 라디칼, 과산화수소 및 제거효소로서 수퍼옥시드 디스무타아제 (SOD), 글루타치온 퍼옥시다아제 (GPx) 및 카탈라아제 (CAT)에 미치는 영향을 평가하였다. 목초액 PL-25 및 PL-50 투여군의 간조직의 미토콘드리아 획분에서는 O$_{2}\;^-$의 생성량은 대조군 대비 12${\sim}$14%의 O$_{2}\;^-$의 생성량 억제효과가 나타났고, 간조직의 마이크로솜획분에서는 대조군 대비 각각 11.0${\sim}$15.0의 O$_{2}\;^-$의 생성량 억제효과가 나타났다. 간조직 미토콘드리아획분에서 ${\cdot}$OH 생성량이 목초액 PL-25 및 PL-50 투여군에서 대조군 대비 12${\sim}$20%의 ${\cdot}$OH 생성 억제효과가 나타났고, 간조직의 마이크로솜획분에서는 대조군 대비 17${\sim}$20%의 ${\cdot}$OH 생성 억제효과가 나타났다. 목초액 PL-25 및 PL-50 투여군의 간조직의 미토콘드리아획분에서는 대조군 대비 12${\sim}$15%의 유의적인 H$_{2}$O$_{2}$의 생성 억제효과가 나타났고, 간조직의 마이크로솜획분에서는 대조군 대비 20${\sim}$22%의 상당히 유의적인 H$_{2}$O$_{2}$의 생성 억제효과가 나타났다. 목초액 PL-25 및 PL-50 투여군의 간조직의 Mn-SOD 활성은 대조군 대비 15${\sim}$25%나 유의적인 활성 증가효과가 인정되었고, 간조직의 Cu/Zn-SOD 활성은 대조군 대비 11${\sim}$16%의 유의적인 SOD활성 증가효과가 인정되었다. 목초액 PL-25 및 PL-50 투여군의 간조직의 미토콘드리아획분의 GPx 활성은 대조군 대비 10${\sim}$17%의 GPx 활성 증가효과가 인정되었고, 간조직의 마이크로솜획분의 GPx 활성 증가효과가 인정되었다. 목초액 PL-25 및 PL-50 투여군의 간조직의 미트콘드리아획분의 CAT 활성은 대조군 대비 12${\sim}$14%의 유의적인 CAT 활성 증가효과가 나타났고, 간조직의 시토졸 1획분에서는 대조군 대비 15${\sim}$27%의 CAT 활성 증가효과가 인정되었다. 이상의 결과에서 목초액의 장기간 투여는 간조직 중의 활성산소의 억제효과뿐만 아니라 방어시스템으로서 활성산소 제거효소의 역할도 충실히 수행하여 노화를 효과적으로 예방하고 억제할 수 있을 것으로 기대된다.

RFID 기반 u-4PL 시스템 개발에 관한 연구 (Study on Development of u-4PL System based RFID)

  • 이종석;나형석;이창호
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2007년도 추계학술대회
    • /
    • pp.181-191
    • /
    • 2007
  • Logistics creates a boom in accordance with the recent new technique's development along with the recent RFID/USN of ubiquitous computing technique. The wave of 4PL(Fourth Party Logistics) that added the strategic consulting based on new IT techniques to logistics outsourcing through existing 3PL service with is a great issue. Moreover, the customer enterprises which contained manufacturers and distributors need the one stop service, therefore a method for effectively dealing with global logistics' environment changes is needed. Above all, a development of the 4PL system with RFID is very urgent. We developed the RFID u-4PL system progressed more than the present system, in which we applied many international standards. Finally, we constructed the web service based on Web 2.0 because of important condition of 4PL.

  • PDF

RFID를 적용한 u-4PL 시스템 개발에 관한 연구 (Feasibility and Validity of u-4PL(Fourth Party Logistics) System with RFID)

  • 나형석;이종석;이창호
    • 대한안전경영과학회지
    • /
    • 제9권5호
    • /
    • pp.87-95
    • /
    • 2007
  • Logistics creates a boom in accordance with the recent new technique's development along with the recent RFID/USN of ubiquitous computing technique. The wave of 4PL(Fourth Party Logistics) that added the strategic consulting based on new IT techniques to logistics outsourcing through existing 3PL service with is a great issue. Moreover, the customer enterprises which contained manufacturers and distributors need the one stop service, therefore a method for effectively dealing with global logistics' environment changes is needed. Above all, a development of the 4PL system with RFID is very urgent. We developed the RFID u-4PL system progressed more than the present system, in which we applied many international standards. Finally, we constructed the web service based on Web 2.0 because of important condition of 4PL.

Probeless Estimation of Electroluminescence Intensities Based on Photoluminescence Measurements of GaN-Based Light-Emitting Diodes

  • Kim, Jongseok;Jeong, Hoon;Choi, Won-Jin;Jung, Hyundon
    • Current Optics and Photonics
    • /
    • 제5권2호
    • /
    • pp.173-179
    • /
    • 2021
  • The electroluminescence (EL) intensities of GaN-based light-emitting diodes (LEDs) are estimated based on their photoluminescence (PL) properties. The PL intensity obtained under open-circuit conditions is divided into two parts: the PL intensity under a forward bias lower than the optical turn-on voltage, and the difference between the PL intensities under open-circuit conditions and under forward bias. The luminescence induced by photoexcitation under a constant forward bias lower than the optical turn-on voltage is primarily the PL from the excited area of the LED. In contrast the intensity difference, obtained by subtracting the PL intensity under the forward bias from that under open-circuit conditions, contains the EL induced by the photocarriers generated during photoexcitation. In addition, a reverse photocurrent is generated during photoexcitation under constant forward bias across the LED, and can be correlated with the PL-intensity difference. The relationship between the photocurrent and PL-intensity difference matches well the relationship between the injection current and EL intensity of LEDs. The ratio between the photocurrent generated under a bias and the short-circuit current is related to the ratio between the PL-intensity difference and the PL intensity under open-circuit conditions. A relational expression consisting of the ratios, short-circuit current, and PL under open-circuit conditions is proposed to estimate the EL intensity.

시엽(枾葉)의 멜라닌 생성 억제와 작용기전에 관한 연구 (Inhibitory Effect of Persimmon Leaves on Melanin Synthesis and its Action Mechanism in B16F10 cells)

  • 장두현;유동열
    • 대한한방부인과학회지
    • /
    • 제22권2호
    • /
    • pp.43-59
    • /
    • 2009
  • Purpose: This study was performed to determine the inhibitory effect of Persimmon Leaves extract (PL) on melanin synthesis in B16F10 melanoma cells B16F10. Methods: The inhibitory effects of PL on melanin synthesis were determined by in vitro assay. To elucidate inhibitory effects of PL on melanin synthesis, we determined the melanin release and melanin production in B16F10. And to investigate the action mechanism, we assessed the gene expression of tyrosinase, TRP-1, TRP-2, PKA, PKC${\beta}$, ERK-1, ERK-2, AKT-1, MITF in B16F10. Results: 1. PL inhibited melanin release, melanin production in B16F10. 2. PL inhibited tyrosinase activity in vitro and in B16F10. 3. PL suppressed the expression of tyrosinase, TRP-1, TRP-2 in B16F10. 4. PL suppressed the expression of PKA, PKC${\beta}$ in B16F10. 5. PL increased the expression of ERK-1, ERK-2, AKT-1 in B16F10. 6. PL suppressed the expression of MITF in B16F10. Conclusion: From these results, it may be concluded that PL is possesed of the antimelanogenetic effects.

PEST-SWOT-AHP 분석을 이용한 중소제조기업의 제조물책임 대응전략 수립 (Developing Product Liability Response Strategies of SMEs using PEST-SWOT-AHP analysis)

  • 서준혁;배성민
    • 산업경영시스템학회지
    • /
    • 제39권2호
    • /
    • pp.11-18
    • /
    • 2016
  • Product liability (PL), which began enforcement in 2002, refers to the legal responsibility of the manufacturers or sellers (wholesales or retailers) for the property damage or bodily harm caused by their product. With a strong enforcement of the Product Liability (PL) Act, companies are required to structure and operate a response system to defend or prevent product accidents efficiently, but small and medium enterprises (SMEs) are unable to respond more aggressively due to limitation of management resources. In this manner, it is important to develop response strategies for SMEs to efficiently cope with the PL Act. In this paper, the PEST (Political, Economic, Social, and Technological) analysis is performed to reveal the impact of the PL Act on SMEs in macro-economic point of view. To formulate SME's PL response strategy, SWOT analysis is performed to categorize each factors from PEST analysis and AHP is applied to identify the intensities of SWOT factors. The prioritized SWOT factor, results of PEST-SWOT-AHP analysis, are used to formulate SME's PL response strategies. The study results are briefly summarized as follows. To reduce product defects, it is necessary for SMEs to formulate PL response strategies for each phase of the product life cycle by continuously collecting and analyzing PL cases in the same industry or for similar products. In addition, SMEs should invest more technological effort to ensure product safety. Further, SMEs should spread PL awareness to all staff members by training internal PL experts. Moreover, a SME should enroll in PL insurance and spread this information to its customers so that they become aware that the company is proactively conforming to the PL law.

전사적 PL 대응시스템의 핵심요인이 기업 성과에 미치는 영향 (Effects of Essential Companywide Components of PL Response System on Company's PL Performance)

  • 서준혁;배성민
    • 산업경영시스템학회지
    • /
    • 제40권2호
    • /
    • pp.22-30
    • /
    • 2017
  • PL (Product Liability) refers to the legal responsibility of a manufacturer or seller for bodily injuries or property losses caused by product defects. Therefore, it is important for companies to construct a product liability response system that strategically manage and effectively adapt to product liability. A PL response system refers to companywide operations of PL prevention (PLP) measures, product safety (PS) measures, and PL defense (PLD) measures appropriate for a company's scale and environment. To establish an enterprise product liability response system, each essential component of corporations should be systematically operated and maintained considering the scale and characteristics of the corporations. Essential components of PL response system is Strategy, Organization, Training, Technology, Investment, and Awareness. Role of essential components is that companies need specific strategies to secure product safety and protect customers from product defects, and appropriate organizations must be composed for effective operation of such strategies. The objective of this paper seeks to examine the relationships among the essential components of the product liability response system and PL performance. PL performance consists of positive performance and negative performance. In particular, positive performance include increased efforts in product or process innovation such as strengthening research and development (R&D) to produce safer products without defects. In order to carry out this research we obtained 98 questionnaire of manufacturing company. A summary of the analyses is as follows: First, the awareness and technology among essential components affect significantly to the positive performance. Second, the awareness and strategy among essential components negative affect to the negative performance.

Indium Interruption Growth법으로 성장한 InAs 양자점의 광학적 특성 (Optical Properties of InAs Quantum Dots Grown by Using Indium Interruption Growth Technique)

  • 이희종;류미이;김진수
    • 한국진공학회지
    • /
    • 제18권6호
    • /
    • pp.474-480
    • /
    • 2009
  • 분자선 에피택시 (molecular beam epitaxy: MBE)를 이용하여 GaAs (100) 기판에 Indium interruption growth법으로 성장한 InAs 양자점 (quantum dots: QDs)의 광학적 특성을 photoluminescence (PL)와 time-resolved PL (TRPL) 실험을 이용하여 분석하였다. In interruption growth법은 InAs 양자점 성장 동안 As 공급은 계속 유지하면서 셔터 (shutter)를 이용해 서 In 공급을 조절하는 방법이다. 본 연구에서는 In을 1초 동안 공급하고 셔터를 0초, 9초, 19초, 29초, 또는 39초 동안 닫아 In 공급을 차단하였으며, 공급과 차단 과정을 각 30회 반복하여 양자점을 성장하였다. In interruption 시간을 0초에서 19초까지 증가하였을 때 PL 피크는 1096 nm에서 1198 nm로 적색편이 (~100 nm)하고 PL 세기는 증가하였으나, 19초에서 39초까지 증가하였을 때 PL 스펙트럼의 변화는 없고 PL 세기는 감소하였다. 모든 양자점의 PL 소멸시간 (decay time)은 약 1 ns로 바닥상태 (ground state) PL 피크에서 가장 길게 나타났다. In interruption 시간이 19초인 시료가 가장 좋은 PL 특성과 가장 짧은 운반자 소멸시간을 나타내었다. PL 특성의 향상은 In interruption 시간동안 일정한 양의 In 원자들의 분리와 이동이 증가한 것으로 설명될 수 있다. 이러한 결과로부터 In interruption 법을 이용하여 InAs 양자점의 크기, 균일도, 조밀도 등을 조절하여 원하는 파장대의 양자점을 성장할 수 있음을 알 수 있다.

디지털 합금 InGaAlAs 다중 양자 우물의 열처리 온도에 따른 발광 특성 (Effect of Annealing Temperature on the Luminescence Properties of Digital-Alloy InGaAlAs Multiple Quantum Wells)

  • 조일욱;변혜령;류미이;송진동
    • 한국진공학회지
    • /
    • 제22권6호
    • /
    • pp.321-326
    • /
    • 2013
  • 디지털 합금(digital alloy) InGaAlAs 다중 양자 우물(multiple quantum wells: MQWs) 구조의 열처리(rapid thermal annealing: RTA) 온도에 따른 발광 특성을 PL (photoluminescence)와 TRPL (time-resolved PL)를 이용하여 분석하였다. $700^{\circ}C$에서 $850^{\circ}C$까지 온도를 변화시켜 RTA한 디지털 합금 MQWs의 PL 결과는 $750^{\circ}C$에서 RTA한 시료가 가장 강한 PL 세기와 가장 좁은 반치폭을 나타내었다. 이것은 $750^{\circ}C$에서 30초 동안 RTA하였을 때 비발광 재결합 센터가 감소하고 가장 매끄러운 경계면이 형성되는 것을 나타낸다. RTA 온도를 $800^{\circ}C$$850^{\circ}C$로 증가하였을 때 PL 피크는 청색편이 하였으며 PL 세기는 감소하였다. PL 피크의 청색편이는 RTA 온도가 증가함에 따라 InGaAs/InAlAs SPS (short-period superlattice)의 경계면에서의 Ga과 Al의 혼합(intermixing)으로 Al 함량이 증가한 것으로 설명되며, PL 세기의 감소는 경계면의 거칠기의 증가와 인듐의 상분리(phase separation)로 인한 비균일 조성(compositional fluctuation)으로 설명된다. RTA 온도를 증가하였을 때 PL 소멸시간은 증가하였으며, 이것은 비발광 재결합 센터(결정 결함)가 감소한 것을 나타낸다. 디지털 합금 InGaAlAs MQWs 시료의 PL 특성은 적절한 RTA 조건에서 현저히 향상되는 것을 확인하였다.

혼합상토의 조성이 고추 플러그 묘의 생육 및 무기원소 흡수에 미치는 영향 (Effect of Root Medium Formulations on Growth and Nutrient Uptake of Hot Pepper Plug Seedlings)

  • 최종명;안주원;구자형
    • 생물환경조절학회지
    • /
    • 제15권4호
    • /
    • pp.369-376
    • /
    • 2006
  • 코이어(CO), 피트모스(PM) 또는 코이어+피트모스 (5:5, v/v, COPM)에 펄라이트(PL)를 0, 20또는 40% (v/v) 혼합하여 9종류의 상토를 조제하고, 고추 '녹광'을 플러그 육묘하면서 작물 생육 및 무기원소 흡수에 미치는 영향을 구명하기 위하여 본 연구를 수행하였다. 연구 목적을 달성하기 위하여 72공 플러그 트레이에 파종하고 플러그 육묘하면서 파종 35일 및 70일 후에 지상부를 채취하여 식물 생육 및 무기원소 함량을 조사 및 분석하였다. CO는 PL의 혼합비율이 증가할수록 생체중 및 건물중 생산량이 많았으나, PM은 PL를 20% 혼합한 처리에서, 그리고 COPM는 PL 0% 처리에서 파종 35일 후 생체중과 건물중이 가장 무거웠다. 파종 70일 후의 생육도 35일 후의 결과와 유사였다. CO와 PM은 PL의 혼합 비율이 높아질수록 파종 3일 후의 식물체내 $P_2O_5$과 K 함량이 감소하고, Ca 및 Mg 함량이 증가하였다. CO 혼합 상토가 동일한 PL 비율의 PM 또는 COPM 상토보다 Ca 및 Mg 함량은 낮았으나, K 함량은 월등히 높았다. 파종 70일 후 CO 또는 PM에 PL의 혼합비율이 증가할수록 $P_2O_5$와 K 함량이 감소하였다. 식물체의 Ca및 Mg는 CO의 경우 20% PL, PM은 40% PL, 그리고 COPM은 40% PL 처리에서 각 유기물내의 다른 PL 처리보다 함량이 많았다.