• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.04b
• /
• pp.26-27
• /
• 2002

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.732-739
• /
• 2005

In this paper, the design and implementation of the Ka-band(20/30 GHz) waveguide diplexer with an E-plane T-junction are described. The waveguide diplexer consists of a transmit filter and a receive filter combined to the antenna port via an E-plane T-junction. The reason why the E-plane T-junction structure was selected is to reduce PIM(Passive Intermodulation) level as the split-plane is located in the low electrical current zone. The optimization was performed using the equivalent circuit so that the computation time might reduce. The structure of the diplexer was designed to handle high power and the multipaction analysis was performed. The multipaction margin was greater than 12 dB and satisfied with ESA/ESTEC recommendation. The manufactured diplexer shows minimum return loss of 22 dB, maximum insertion loss of 0.20 dB and maximum isolation of -40 dB for both transmitted receive bands. Those mean the analysis results of the waveguide diplexer were well agreed with the electrical performance test.

• Journal of Korea Game Society
• /
• v.4 no.4
• /
• pp.3-9
• /
• 2004

Expansion of internet and construction of high speed network which require multimedia services like MMORPG are exceeding the infra-structure. In this work, CBT is analyzed by focusing on the multicast routing protoco and the algorithm which is transformable to Anycast scheme from CBT scheme is suggested to adapt game traffic. Anycast routing scheme is suitable to distribute high density traffic. Simulation model was set per a number of group and group member, which enabled to reflect real environments. Performance evaluation of routing based on the characteristics of end-to-end delay of CBT and Anycast was mainly focused, The result showed that Anycast method was improved up 8.7%, 25.5%, 34.0%, 38.6% and 51.8%, 56.6% comparing with PIM-DM and CBT routing when packet site was 128, 512 and 1K byte respectively. From the simulation, CBT/Anycast routing scheme can be presented as a flexible and solid solution for the MMORPG traffic to improve the delay characteristics of game packets.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1436-1442
• /
• 2004

A shared-based tree established by the Core Based Tree multicast routing protocol (CBT), the Protocol Independent Multicast Sparse-Mode(PIM-SM), or the Core-Manager based Multicast Routing(CMMR) is rooted at a center node called core or Rendezvous Point(RP). The routes from the core (or RP) to the members of the multicast group are shortest paths. The costs of the trees constructed based on the core and the packet delays are dependent on the location of the core. The location of the core may affect the cost and performance of the shared-based tree. In this paper, we propose three methods for selecting the set of candidate cores. The three proposed methods, namely, k-minimum average cost, k-maximum degree, k-maximum weight are compared with a method which select the candidate cores randomly. Three performance measures, namely, tree cost, mean packet delay, and maximum packet delay are considered. Our simulation results show that the three proposed methods produce lower tree cost, significantly lower mean packet delay and maximum packet delay than the method which selects the candidate cores randomly.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.1
• /
• pp.75-84
• /
• 2007

In this study, I developed a teaching-learning model using project learning model which makes the most of PIM(Peer & Instructor Mentoring), Presentation contest, and unification of courses on the field ophthalmic optics. There were several conclusion as followings;. The teaching-learning model considering the unification and organic connections among subjects was efficient to the students' academic achievement. Peer & instructor mentoring system was helpful for students to accomplish their own learning projects. Project learning model with collaboration was useful for the development of students' self-controled learning ability and communicative ability. Project learning model gave its driving force to the better motivation and to the goal achievement. Project learning model was instructive for building up the related theories and concepts on the students' major. In conclusion, project learning model mixed subjects with festival, can be a alternative teaching-learning model.

• Membrane and Water Treatment
• /
• v.7 no.6
• /
• pp.521-537
• /
• 2016

Laboratory-scale experiments were carried out to investigate the adsorption equilibrium, the adsorption kinetics and facilitated transport of two cationic dyes (Methylene Blue (MB) and Rhodamine B (RB)) on Polymer Inclusion Membrane (D2EHPA-PIM). Different adsorption isotherms (Freundlich, Langmuir and Temkin models) as well as kinetics models indicated that the adsorption process is spontaneous and exothermic. Under the optimal conditions, the adsorption removal efficiencies reach about 93% and 97% for MB and RB respectively. Different extraction values by D2EHPA-PIM were obtained for the two cationic dyes: MB is weakly extracted at pH 2.0 (E% = 18.7%) whilst E% = 82.4% was observed for RB at the same pH. This difference was exploited in a mixture containg both the 2 cationic dyes for the selective extraction of RB at pH 2. Desorption of both dyes was achieved from the membrane by using acidic aqueous solutions and desorption ratio up to 90% was obtained. The formulas of the extracted complexes by the PIMs were, determined by the method of slopes. The dyes transport was elucidated using mass transfer analysis where in it found relatively high values of the initial flux ($J_0$) as 41.57 and $18.74{\mu}mol.m^2.s^{-1}$ for MB and RB respectively.

• KSBB Journal
• /
• v.23 no.2
• /
• pp.135-141
• /
• 2008

SMB (simulated moving bed) chromatography is a very useful utility for the separation of binary system. We simulated the separation of L-arabinose and L-ribose from the mixture by using lab-scale 4(1-1-1-1)-zone SMB chromatography. Preliminary experiments of PIM (pulse input method) were performed to measure adsorption isotherms of L-ribose and L-arabinose in $NH_2$ HPLC column, and experimental and simulated results from ASPEN chromatography were compared. To find the most suitable separation condition in SMB, we carried out a simulation in $m_2-m_3$ plane base on the triangle theory and calculated operating parameters (flow rate of four zone, switching time and feed concentration and so on) using ASPEN chromatography under the conditions of linear isotherms obtained from PIM.

• Journal of KIISE:Software and Applications
• /
• v.34 no.8
• /
• pp.697-707
• /
• 2007

Since embedded software is very dependent for target hardware architecture, characteristics of the platform must be considered when designing the software. Furthermore, MPSoCs consists of heterogeneous hardware components that are specified in micro level. Thus mapping of embedded software for MPSoCs should be considered the characteristics. In this paper, we provide an approach to automatic mapping PIM (Platform Independent Model) of an embedded software to PSM(Platform Specific Model) for MPSoC(Multi Processor System On Chip) and verify its effectiveness with simulation. In the proposed approach, tasks are derived from an object oriented model based on the UML (Unified Modeling Language). And then the types of the derived tasks are identified. With the identified types and inter relationship between tasks, the tasks are assigned to appropriate heterogeneous hardware components. We expect that the approach improve accuracy of the assigning and concurrency of the deployed software.

• Journal of Powder Materials
• /
• v.18 no.3
• /
• pp.262-268
• /
• 2011

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at $60^{\circ}C$, and subsequently thermal debinding which was conducted at $260^{\circ}C$ and $480^{\circ}C$ for 6 hrs in the mixed gas of $H_2/N_2$, respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at $1380^{\circ}C$, even the TRS is lower than the conventional sintering process.

• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.