• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.3
• /
• pp.246-254
• /
• 2002

In this paper auto-tuning scheme of PID controller based on the reference model has been studied for a Process control system by immune algorithm. Up to this time, many sophisticated tuning algorithms have been tried in order to improve the PID controller performance under such difficult conditions. Also, a number of approaches have been proposed to implement mixed control structures that combine a PID controller with fuzzy logic. However, in the actual plant, they are manually tuned through a trial and error procedure, and the derivative action is switched off. Therefore, it is difficult to tune. Since the immune system possesses a self organizing and distributed memory, it is thus adaptive to its external environment and allows a PDP (Parallel Distributed Processing) network to complete patterns against the environmental situation. Simulation results reveal that reference model basd tuning by immune network suggested in this paper is an effective approach to search for optimal or near optimal process control.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.325-330
• /
• 2006

Integrating processes are frequently encountered in process industries. Generally they are most commonly associated with level control problems. In this paper, tuning formulae of PID controllers for set-point tracking and load disturbance rejection are presented on integrating processes with time delay. In particular, the controller parameters are determined such that performance criteria(IAE, ISE and ITSE) are minimized. Optimal PID parameter sets are obtained by means of a real-coded genetic algorithm(RCGA) and then tuning rules are addressed using obtained PID parameter sets and another RCGA. The performances of the proposed tuning rules are tested on two processes.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1242-1244
• /
• 1992

This Paper deals with a Auto-Tuning Fuzzy PID Controller used in real time and its application for induction motor. The control strategy of the controller is able to develop and improve automatically. The new Auto-Tuning Fuzzy PID Control algorithm which modifies the fuzzy control decision table is presented in this paper. It can automatically refine an initial approximate set of fuzzy rules. The possibility of applying fuzzy algorithms in faster response, and more accurate was compared with other industrial processes, such as AC Motor driver. The performance of Proportional_Integral Derivative(PID) control and this fuzzy controllers is compared in terms of steady_state error, settling time, and response time. And then, Limitations of fuzzy control algorithms are also described.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.288-291
• /
• 1999

The PID (Proportional-Integral-Derivative) controller is widely used in the industries for more than fifty years with the well known Ziegler-Nichols tuning method and others varieties. However, most of the PID controller being used in the real practice still require trial and error adjustment for each process after the tuning method is done, which is consuming of time and needs the operator experiences to obtain the best results for the controller parameter. In order to reduce the inconvenience in the controller tuning, this paper presents a design of an automatic PID controller parameter analyzer being used as a support instrument in the industrial process control. This analyzer is designed based on the tuning formula of Dahlin to synthesize the PID controller parameter. Using this analyzer, the time to be spent in the trial and error procedures and its complexity can be neglected. Experimental results using PID controller parameter synthesized from this analyzer to the liquid level control plant model and the fluid flow control plant model show that the responses of the controlled systems can be efficiently controlled without any difficulty in mathemathical computation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.4 s.316
• /
• pp.61-66
• /
• 2007

PID control is windely used to control stable processes, however, its application to integrating processes is less common. In this paper we proposed a simple PID controller tuning method for integrating processes with time delay to meet a stable specification. With the proposed PID tuning method, we can obtain stable integrating processes using PD controller in inner feedback loop and a loop transfer function with desired stable specification. This guarantees bout robustness and performance. Simulation examples are given to show the good performance of the proposed tuning method to other methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1840-1846
• /
• 2005

In this paper, does by purpose DC servo motor speed controller design about PID coefficient tuning techniques that use genetic algerian. DC servo motor is used in application field of a peat many control machine or robot etc. and in this field, selection of controller parameters requires user's expert knowledge. Therefore, general amount of work engineers must continuously iteration tuning in controller parameters by trial and error. With this, when must tuning parameter coefficient about change of dynamic system or disturbance, can improve the efficiency according to following that is more precised and parameter coefficient value that is optimized by using genetic algorithm. In this paper, from dynamic character modeling get in analyze dynamic character of DC motor desist controller drive control possible that is fast response character md improved speed precision using a Genetic Algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.885-890
• /
• 2004

Strictly maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature, the change of the dynamic characteristics in the reheater. Up to the present time, PID Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on tuning of the Controller with disturbance rejection for thermal power plant using immune based multiobjective approach. An ITSE(Integral of time weighted squared error) is used to decide performance of tuning results.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.345-348
• /
• 1991

This paper describes a new auto tuning method for the intelligent PID control system. This new method is hosed on the settling time of the process and has been introduced into auto-tuning PID controller using fuzzy logic. The performance of the controller is measured by computer simulation. Simulation shows good results that controller searches well the optimal values of PID parameters in any conditions and the response characteristic of the control system is improved.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.95-97
• /
• 2004

This paper proposed new IMC-PID controller design method that use loop shaping method. It could consider such design specifications as gain margin, phase margin, sensitivity function etc by appling the loop shaping method for tuning IMC-PID controller whose structure has only one design parameter and guarantees internal stability. To shape desirable loop gain, the relation between these design specification and parameter is derived by mathematical basis. And the availability of proposed in this paper tuning method that can regard design specifications is checked through example comparison and analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.724-728
• /
• 1987

Recently, two degrees of freedom PID control systems have attracted attention, because of their better process control quality for both set point variable tracking and disturbance resistivity than that of conventional PID control systems. This paper describes a new auto-tuning method for the two degrees of freedom PID control system based on a newly developed model matching method in the frequency domain. This new method has been introduced into a two degrees of freedom PID auto-tuning controller, named AdTune TOSDIC-21D8. The superior features of the controller and the results of field tests Are presented.