• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.328-331
• /
• 2006

유비쿼터스 시대에 무선센서노드를 이용한 데이터 수집은 필요성이 증대하고 있다. 본 논문에서는 PIC16F877과 Bluetooth를 이용하여 데이터를 수집하고, PC에서 데이터베이스를 구축한다. PIC16F877은 무선센서노드를 제어하고, PC는 DB의 수집되는 데이터를 비교하여 제어 데이터와 테이블을 갱신하고, 노드의 센싱 주기를 지능형으로 변환시키는 알고리즘을 제안한다. 연구의 결과는 저렴하고, 실용적이며, 간단하게 시스템을 구축하여 산업현장에 적용할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.299-303
• /
• 2003

Position decision system embody to interpret for observation target position. Observation target is observed at observation post of 3 places. CCD cameras of observation post is achieved turning control by stepping motor. Controller interpret observation target's position to use direction and angle information of observation post. Controller and observation post used PIC16F877. PIC16F877 achieves rotation control of stepping motor and distance arithmetic of observation target. Result that measure this system 50 times was achieved correct position interpretation of 47 times. Position interpretation failure of 3 times was construed for cause in used controller special quality.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.833-834
• /
• 2006

In this paper, It is proposed collecting, processing, and learning of data with PIC16F877 and Acode 300[3], constructing database in PC. The PIC16F877 microcontroller nodes are the radio sensor and the DC motor controller. The PC of flexible factory level construct the data-table for object-oriented optimal environment control. The DC Motor control command is decision with back-propagation.

• 한국컴퓨터산업학회논문지
• /
• 제8권4호
• /
• pp.221-228
• /
• 2007

Many kinds of microcontrollers such as 8051, PIC16 and Atmega series are used for the automatic control system, home appliances and communication equipments manufacturing. It is very important to understand the basic operational principles of microcontrollers and their design concepts. There are many kinds of educational microcontroller trainers and also they are designed and assembled very complicatedly. For the students or developers, it is very difficult to catch the basic operation schemes and apply the techniques to the control system. And also it requires much cost and time for the various kinds of trainers purchasing. In this paper, standardization of pins layout and peripheral modules for the general microcontroller usage was introduced and tested with 89C2051, 89C51, PIC16F84, PIC16F877, Atmega8535 and Atmega128, etc. As a result of test, it was found that saving the cost and time using this suggested device was possible. And also it was very effective way to understand microcontroller design and programming techniques.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.94-101
• /
• 2004

This paper presents the development of a keypad test system for the improvement of working environment and productivity using PTC 16F877 microprocessor. In order to detect the fault of keypad products, hardware and software design is performed in this system. Keypad fault detection system is controlled by the 8 bit one chip PIC microcontroller for the exactness and speed. Developed panel of the keypad test system is comprised of the sub-panel for selecting in the inspected keypad types and the main panel f3r displaying the working order and fault position. Furthermore, all data from keypad inspection are stored in main memory of personal computer for the database. All these functions lead to the improvement of working speed and environment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.459-462
• /
• 2002

This paper presents the development or a keypad test system for the improvement or the working environment and productivity improvement using the microprocessor PIC16F877 Chip. In order to detect the fault of keypad products, the design of hardware and software is performed in this system. All controls of the system is implemented by the 8 bit one chip micro-controller PIC. This keypad test system can also recognizes the work process, the work result and the fault position of the keypad which is made by the method of a flexible printed circuit (FPC) and construct the database about test results using personal computer. The experimental results show the effective performance of the keypad test system.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.1068-1076
• /
• 2019

오늘날 우리가 사용하고 있는 대부분의 전자제품에는 마이크로 컨트롤러가 내장되어 있으며, 이를 내장한 미니컴퓨터를 임베디드 시스템이라고 한다. 이러한 소규모 환경에서는 마이크로 컨트롤러에 응답성이 매우 중요한데 본 논문에서는 마이크로 컨트롤러에 기본적인 입출력 제어, 타이머/카운터 인터럽트 동작원리 및 이해에 대한 내용과 더불어 마이크로 컨트롤러 내의 플래시메모리에 각 프로그램 실행 루틴인 메인 루틴 및 인터럽트 서비스루틴에 대한 특징 및 프로그램 실행 순서를 컨트롤하여 처리율과 레이턴시를 개선하는 프로그램 로직을 제안하고 있다. 본 논문에서의 하드웨어 시뮬레이션은 아트멜사와 마이크로칩사에서 출시한 ATmega128과 PIC16F877A 마이크로 컨트롤러를 이용하여 검증이 실시되었다.

• 융합신호처리학회논문지
• /
• 제11권2호
• /
• pp.163-168
• /
• 2010

본 논문에서는 전력용 반도체 소자를 위한 과열보호시스템의 설계 및 구현에 관한 내용을 다룬다. 제안된 시스템은 전력용 반도체 소자의 온도를 검출하기 위해서 별도의 온도센서나 트랜지스터를 사용하는 기존의 방법과 달리 파워 MOSFET의 $R_{ds(on)}$ 특성만을 이용한다. 과열보호를 위한 제안된 방법은 IRF840 파워 MOSFET를 이용하여 성공적으로 시험되었다. 제안된 과열보호 알고리즘을 구현하기 위해 PIC 마이크로컨트롤러인 PIC16F877A 소자를 사용하였다. 내장된 10-bit A/D 변환기는 IRF840의 소스와 드레인 전압변화를 검출하기 위해 이용된다. 측정된 소스-드레인 간 전압으로부터 도출된 온도-저항 간의 관계식은 파워 MOSFET의 게이트 트리거 신호를 제어한다. 만약 검출된 온도 전압의 임계값이 설정된 임의의 보호온도 전압 값을 초과할 때 마이크로컨트롤러는 파워 MOSFET으로부터 트리거 신호를 제거시켜 파워 MOSFET이 과열되는 것을 방지한다. 실험결과는 제안된 시스템이 정확도 측면에서 1.5%의 오차 이내로 정확함을 보여주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.313-314
• /
• 2006

Indicating product quantity by real time can be benefit both worker and management. Worker can compare real product quantity with its target and can adjust working speed to match with goal. Therefore, so called JPH equipment developed to indicate target quantity of product. As a main processor PIC16F877 was used and FND display were used to indicate current time, elapsed time, JPH value and target amount of product. Values like JPH and starting time, etc. are can easily be set by $4{\times}4$ numeric keypad and display datum likes target amount of product, current time and elapsed time, etc are displayed on FND by RS232 serial transmit. The operation of JPH equipment are tested and verified through long term test and are proved acting properly on working conditions.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1886-1900
• /
• 2018

This paper proposes a confronting feedback control structure and controllers for positive output elementary super lift Luo converters (POESLLCs) working in discontinuous conduction mode (DCM). The POESLLC offers the merits like high voltage transfer gain, good efficiency, and minimized coil current and capacitor voltage ripples. The POESLLC working in DCM holds the value of not having right half pole zero (RHPZ) in their control to output transfer function unlike continuous conduction mode (CCM). Also the DCM bestows superlative dynamic response, eliminates the reverse recovery troubles of diode and retains the stability. The proposed control structure involves two controllers respectively to control the voltage (outer) loop and the current (inner) loop to confront the time-varying ON/OFF characteristics of variable structured systems (VSSs) like POESLLC. This study involves two different combination of feedback controllers viz. the proportional integral controller (PIC) plus sliding mode controller (SMC) and the fuzzy logic controller (FLC) plus SMC. The state space averaging modeling of POESLLC in DCM is reviewed first, then design of PIC, FLC and SMC are detailed. The performance of developed controller combinations is studied at different working states of the POESLLC system by MATLAB-Simulink implementation. Further the experimental corroboration is done through implementation of the developed controllers in PIC 16F877A processor. The prototype uses IRF250 MOSFET, IR2110 driver and UF5408 diodes. The results reassured the proficiency of designed FLC plus SMC combination over its counterpart PIC plus SMC.