• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.80-80
• /
• 2010

전자제품의 소형화, 경량화, 고집적화가 심화됨에 따라 전자제품을 구성하는 회로의 미세화 또한 요구되고 있다. 이러한 요구는 경성회로기판 (rigid printed circuit board, RPCB) 뿐만 아니라 연성회로기판 (flexible printed circuit board, FPCB) 에도 적용되고 있으며 이에 대한 많은 연구 또한 이루어지고 있다. 연성회로기판은 일반적으로 절연층을 이루는 폴리이미드 (polyimide, PI)와 전도층을 이루는 구리로 이루어져 있다. 폴리이미드는 뛰어난 열적 화학적 안정성, 우수한 기계적 특성, 연속공정이 가능한 장점을 가지고 있으나, 고온다습한 환경하에서 높은 흡습성으로 인해 전도층을 이루는 구리와의 접합특성이 저하되는 단점 또한 가지고 있다. 또한 전도층을 이루는 구리는 고온다습한 환경하에서 산화 발생이 용이하기 때문에 접합특성의 감소를 야기할 수 있다. 따라서 본 연구에서는 고온다습한 조건하에서 sputtering and plating 공정을 통해 순수 Cr seed layer를 가지는 연성회로기판의 seed layer의 두께와 시효시간의 변화로 인해 발생하는 접합특성의 변화를 관찰하고 분석하였다. 본 연구에서는 두께 $25{\mu}m$의 일본 Kadena사(社)에서 제작된 폴리이미드 상에 sputtering 공정을 통해 순수 Cr으로 이루어진 각각 두께 100, 200, $300{\AA}$의 seed layer를 형성한 후 전해도금법을 이용, 두께 $8{\mu}m$의 구리 전도층을 형성한 시료를 사용하였다. 제작된 시료는 고온다습한 환경하에서의 접합 특성의 변화를 관찰하기 위하여 $85^{\circ}C$/85%RH 항온항습 조건하에서 각각 24, 72, 120, 168시간 동안 시효처리 한 후, Interconnections Packaging Circuitry (IPC) 규격에 의거하여 접합강도를 측정하였다. 시료의 전도층은 폭 3.2mm 길이 230mm의 패턴을 가지도록, 절연층은 폭 10mm, 길이 230mm으로 구성되었으며 이를 50.8mm/min의 박리 속도로 각 시편당 8회의 $90^{\circ}$ peel test를 실시하였다. 파면의 형상과 화학적 조성을 분석하기 위해 SEM (Scanning electron microscope)과 EDS (Energy-dispersive X-ray spectroscopy)를 사용하였으며, 파면의 조도 측정을 위해 AFM (Atomic force microscope)을 사용하였다. 또한 계면의 화학적 결합상태를 분석하기 위해 XPS (X-ray photoelectron spectroscopy)를 통해 파면을 관찰 분석하였다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).

• Journal of Life Science
• /
• v.21 no.1
• /
• pp.89-95
• /
• 2011

p53 is tumor suppressor gene that regulates apoptosis such as caspase-dependent and p21-mediated signaling pathways. PI3K/Akt is known to be over-activated in cancer cells. Akt activates many survival-related signals such as mTOR and COX-2. Inactivation of Akt would result in non-inhibition of p53 as well as induced apoptosis. In this study, we showed that curcumin and EGCG activate p53 via inhibition of the Akt signaling pathway. Treatments using curcumin and EGCG in different concentrations for 24 hr and 48 hr inhibited proliferation of HCT116 colon cancer cells and increased apoptotic cell death. Also, our data showed that curcumin and EGCG increased the p53 expression and decreased the p-Akt. Treatment of LY294002 (Akt inhibitor) resulted in decreased cell proliferation of cancer cells, while LY294002 treated with curcumin or EGCG showed a greater decrease of cell proliferation. In addition, inhibition of Akt induced p53 activation in HCT116 colon cancer cells. These results suggest that curcumin and EGCG induce apoptosis by inhibiting Akt and increase p53 in HCT116 colon cancer cells.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.5
• /
• pp.473-479
• /
• 2005

Background : Gefitinib targets the epidermal growth factor receptor r(EGFR), and Gefitinib has antitumor activity in patient with non-small cell lung cancer (NSCLC). However, only 10 to 20 percent of patients show a clinical response to this drug, and the molecular mechanisms underlying patient sensitivity to gefitinib are unknown. PTEN (Phosphatase and tensin homolog deleted on chromosome Ten) plays a role for the modulation of the phosphatidylinositol 3-kinase pathway (PI3K), which is involved in cell proliferation and survival, so that it can inhibit cell cycle progression and induce G1 arrest. Therefore, we analyzed the relationship between PTEN expression and gefitinib's responsiveness in patients having advanced non small cell lung cancer that had progressed after previous chemotherapy. Methods : The expression of PTEN was studied by immunohistochemistry in paraffin-embedded tumor blocks that were obtained from 22 patients who had been treated with gefitinib from JAN, 2001 to AUG. 2004. For the evaluation of the relationships between the PTEN expression, the clinical stage and the basal characteristics, those cases that showed the respective antigen expression in >50% of the tumor cells were considered positive. Results : The positive rate of PTEN staining was 55% of the total of 22 patients. There was a significant relationship between the increased expression of PTEN and the response group (p=0.039). However, there was no significant relationship between the expression of PTEN and other clinicopathologic characteristics. Conclusion: The expression of PTEN in patients with advanced non small cell lung cancer that has progressed after previous chemotherapy may play a role in gefitinib's responsiveness.

• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.361-374
• /
• 1999

Intraoral filled type of orthodontic appliance can cause reversible or irreversible damages such as gingivitis, periodontitis, enamel decalcification, dental caries, root resorption, and pulpal changes. Such adverse effects are brought by increase in dental plaque as well as oral flora. Such an increase causes gingival inflammation and enamel decalcification. The purpose of this study is to get klowledge on initial changes in dental plaque, gingivitis, and enamel decalcification after bonding fixed orthodontic appliances according to time flow, gender, and sides(right/left) of premolar region. For control group, 48 students of dental college, Yonsei university(26 males, 22 females) were chosen; for experimental group, 73 orthodontic patients(36 males, 37 females) who will be treated with fixed appliances were chosen. All the subjects had no systemic disease, juvenile periodontitis and all the females had passed their ,menarche. Tooth brushing instruction was given to all the subjects prior to the experiment. For control group, plaque index, gingival index, and decalcification index were measured twice at 3 weeks interval ; for experimental group, the same was done prior to, 3, 6, 9 weeks after bonding fixed appliances. The following results were obtained: 1. In plaque index 3 weeks after placement of appliances, and it showed gradual increase afterwards. 2. In gingival index3 weeks after placement of appliances, and afterwards it showed increase at a faster rate than plaque index. 3. Enamel decalcification began to show between 3 and 6 weeks after bonding fixed appliances. Decalcification index began to increase 6 weeks after appliance placement, but there was no statistical significance. 4. When the comparison was made between two sides of premolar region, the right side showed greater index in plaque and gingival index of experimental group.

• Korean Journal of Remote Sensing
• /
• v.28 no.5
• /
• pp.501-508
• /
• 2012

Albedo is known as a factor that directly impacts on the surface energy balance one of the elements of earth radiation balance. The change of albedo includes the change of soil moisture, vegetation, solar zenith angle, snow, and so on. In addition, it operates as a crucial path to understanding feedback mechanisms between radiation balance and its influence on climate and vegetation dynamics and therefore, observing the variation of albedo is a one of the essential procedures for anticipating climate change. In this study, we used MODIS 16-Day composited Albedo data from 2001 to 2011 years with the purpose of observing the change of albedo over Northeast Asia. According to the tendency of albedo for 11 years, albedo in the area of an active vegetation has increased in near-infrared (NIR) domain and decreased in visible (VIS) domain. On the basis of local changes in vegetation in 2002, the both area of the Gobi Desert and the Manchuria was enormously changed and chosen the research area and furthermore, the vegetation of both regions had deteriorated due to the change of the minimum value since 2010.

• Journal of Life Science
• /
• v.18 no.12
• /
• pp.1651-1656
• /
• 2008

Redox factor-1 (Ref-1) is essential for repair of oxidatively damaged DNA and also govern the reductive activation of many transcription factors. In this study, we examined the effect of overexpressed Ref-1 on AKT activation for nitric oxide (NO) production in mouse aortic endothelial (MAE) cells. Adenoviral-mediated overexpression of Ref-1 enhanced NO production in unstimulated- as well as bradykinin-stimulated MAE cells. Importantly, forced overexpression of Ref-1 induced direct phosphorylation of AKT in cells. And, a PI3K inhibitor wortmannin completely abolished the increase in AKT phosphorylation by stimulation of bradykinin and/or overexpressed Ref-1. In addition, inhibition of AKT activity with HA-tagged activation-deficient AKT suppressed Ref-1-induced endothelial NO synthase (eNOS) phosphorylation and resulted in a corresponding inhibition of unstimulated- and bradykinin-stimulated NO production. These results suggest that Ref-1 stimulates direct phosphorylation of AKT for eNOS enzyme activity in murine endothelial cells.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.68.1-68.1
• /
• 2014

We present the results of far-ultraviolet (FUV) observations of comet C/2001 Q4 (NEAT) obtained with Far-ultraviolet Imaging Spectrograph (FIMS) on board the Korean microsatellite STSAT-1, which operated at an altitude of 700 km in a sun-synchronous orbit. FIMS is a dual channel imaging spectrograph (S-channel 900-1150 ${\AA}$, L-channel 1350-1710 ${\AA}$, and ${\lambda}/{\Delta}{\lambda}$ ~ 550 for both channels) with large image fields of view (S-channel $4.0^{\circ}{\times}4.6^{\prime}$, L-channel $7.5^{\circ}{\times}4.3^{\prime}$, and angular resolution ~ $5-10^{\prime}$) optimized for the observation of diffuse emission of astrophysical radiation. Comet C/2001 Q4 (NEAT) were made in two campaigns during its perihelion approach between May 8 and 15, 2004. Based on the scanning mode observations in the wavelength band of 1400-1700 ${\AA}$, we have constructed an image of the comet with an angular size of $5^{\circ}{\times}5^{\circ}$, which corresponds to the central coma region. Several important fluorescence emission lines were detected including S I multiplets at 1429 and 1479 ${\AA}$, C I multiplets at 1561 and 1657 ${\AA}$, and the CO $A^1{\Pi}-X^1{\Sigma}^+$ Fourth Positive system; we have estimated the production rates of the corresponding species from the fluxes of these emission lines. The estimated production rate of CO was $Q_{CO}=(2.65{\pm}0.63){\times}10^{28}s^{-1}$, which is 6.2-7.4% of the water production rate and is consistent with earlier predictions. The average carbon production rate was estimated to be $Q_C={\sim}1.59{\times}10^{28}s^{-1}$, which is ~60% of the CO production rate. However, the observed carbon profile was steeper than that predicted using the two-component Haser model in the inner coma region, while it was consistent with the model in the outer region. The average sulfur production rate was $Q_S=(4.03{\pm}1.03){\times}10^{27}s^{-1}$, which corresponds to ~1% of the water production rate.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.305-312
• /
• 2005

Poly(urethane-imide)s were prepared by reaction between crosslinkable endgroup containing soluble polyimide (PI) by chemical imidization and acrylate end-capped polyurethane (PU). Poly (amic acid) was prepared from 2,2'-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 4,4'-oxydianiline (ODA) and then end-capped with maleic anhydride (MA). The PU prepolymers were prepared by the reaction of polycaprolactone diol, tolylene 2,4-diisocyanate and end-capped with hydroxyl ethyl acrylate. The effect of PU content on the residual stress behavior, morphology and thermal property was studied. The poly(urethane-imide)s were characterized by thin film stress analyzer (TFSA), XRD, TGA and DMTA. Low residual stress and slope in cooling curve were achieved by higher PU content. Compared to typical polyurethane, these polymers exhibited better thermal stability due to the presence of the imide groups. Finally the residual stress of poly(urethane-imide)s was strongly affected by the morphological structure.

• Steel and Composite Structures
• /
• v.34 no.1
• /
• pp.1-15
• /
• 2020

This paper presents experimental and numerical studies on effects of local damages on the in-plane elastic-plastic buckling and strength of a fixed parabolic steel tubular arch under a vertical load distributed uniformly over its span, which have not been reported in the literature hitherto. The in-plane structural behaviour and strength of ten specimens with different local damages are investigated experimentally. A finite element (FE) model for damaged steel tubular arches is established and is validated by the test results. The FE model is then used to conduct parametric studies on effects of the damage location, depth and length on the strength of steel arches. The experimental results and FE parametric studies show that effects of damages at the arch end on the strength of the arch are more significant than those of damages at other locations of the arch, and that effects of the damage depth on the strength of arches are most significant among those of the damage length. It is also found that the failure modes of a damaged steel tubular arch are much related to its initial geometric imperfections. The experimental results and extensive FE results show that when the effective cross-section considering local damages is used in calculating the modified slenderness of arches, the column bucking curve b in GB50017 or Eurocode3 can be used for assessing the remaining in-plane strength of locally damaged parabolic steel tubular arches under uniform compression. Furthermore, a useful interaction equation for assessing the remaining in-plane strength of damaged steel tubular arches that are subjected to the combined bending and axial compression is also proposed based on the validated FE models. It is shown that the proposed interaction equation can provide lower bound assessments for the remaining strength of damaged arches under in-plane general loading.