• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.181-189
• /
• 2017

The three-phase four-leg voltage-source inverter topology is an interesting option for the three-phase four-wire system. With an additional leg, this topology can achieve superior performance under unbalanced and nonlinear load conditions. However, because of the low bandwidth of conventional controllers in high-power inverter applications, the system cannot guarantee a balanced output voltage under the unbalanced load condition. Most of the methods proposed to solve this problem mainly use the multiple synchronous frame method, which requires several controllers and a large amount of computation because of frame transformation. This study proposes a simple hybrid controller that combines proportional-integral (PI) and resonant controllers in the synchronous frame synchronized with the positive-sequence component of the output voltage of the three-phase four-leg inverter. The design procedure for the controller and the theoretical analysis are presented. The performance of the proposed method is verified by the experimental results and compared with that of the conventional PI controller.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1500-1511
• /
• 2017

The purpose of this paper is to study a high-performance control scheme for neutral-point-clamping three-level (NPC-3L) inverter fed dual three-phase permanent magnet synchronous motor (PMSM) drives by considering some asymmetric factors such as the non-identical parameters in phase windings. To implement this, the system model is analyzed for dual three-phase PMSM drives with asymmetric factors based on the vector space decomposition (VSD) principle. Based on the equivalent circuits, PI controllers with feedforward compensation are used in the d-q subspace for regulating torque, where the cut-off frequency of the PI controllers are set at the twice the fundamental frequency for compensating both the additional DC component and the second order component caused by asymmetry. Meanwhile, proportional resonant (PR) controllers are proposed in the x-y subspace for suppressing the possible unbalanced currents in the phase windings. A dual three-phase space vector modulation (DT-SVM) is designed for the drive, and the balancing factor is designed based on the numerical fitting surface for balancing the DC link capacitor voltages. Experimental results are given to demonstrate the validity of the theoretical analysis and the proposed control scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.473-479
• /
• 2016

This paper describes an accurate and stable current control method of switched reluctance motors(SRMs), which have recently attracted considerable wide attention owing to their favorable features, such as high performance, high durability, structural simplicity, low cost, etc. In most cases, the PI controllers(PICC) have been used mostly for the current control of electric motors because their algorithm and selection of controller gain are relatively simpler compared to other controllers. On the other hand, the PI controller requires an adjustment of the controller gains for each operating point when nonlinear system parameters change rapidly. This paper presents a stable current control method of an SRM using self-tuning fuzzy current controller(STFCC) under nonlinear parameter variation. The performance of the considered method is validated via a dynamic simulation of the current controlled SRM drive using Matlab/Simulink program.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.259-269
• /
• 2003

This paper considers the problem of determining a set of PI, PD and PID controller gains, for a given linear time invariant plant, that meets or exceeds the closed loop step response specifications. The proposed method utilizes two recent results: for a given system, (1) finding a set of stabilizing PI, PD and PID gains and (2) the relationship between time response (overshoot and speed) and the coefficients of the characteristic polynomial. The method allows us to extract a subset of PI, PD and PID gains that meets stability as well as time domain performance requirements. The intersections of two dimensional sets described by linear and quadratic inequalities in the controller design space are need to be Identified through numerical computation. The procedure is illustrated by examples.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.12
• /
• pp.87-97
• /
• 1993

To improve the limitation of fuzzy PI controller when is applied to systems of order higher than one, a fuzzy PI controller that fuzzily resets or amplifies the accumulated control input according to fuzzy rules defined on (error, change of error) space is proposed. The proposed controller structure was motivated by the characteristics of fuzzy PI controller that it generally gives unevitable large overshoot in trial of reducing rise time of response especially when a system of order higher than one is considered. Based on the observation that the undesirable characteristics of the fuzzy PI controller is caused by integrating control input excessively, even though the integrator is introduced to overcome steady state error, we propose a controller that clear out or doubles integrated control input in a fuzzy manner according to the situation to reduce rise time as well as overshoot. To show the usefulness of the proposed controller, it is applied to the systems that are difficult to stabilize or difficult to get satisfactory response by conventional fuzzy PI controllers.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.3
• /
• pp.48-54
• /
• 2018

This paper deals with a development of a quad-rotor for a hovering attitude control. First, a rotational dynamics are derived to design an attitude controller. The attitude controller is based on PI (Proportional-Integral) controller. For a stable attitude control, an anti-windup method applies to the PI attitude controller. Additionally, a complementary filter is used to obtain more reliable attitude. Gain values of the attitude controllers based on the anti-windup method are obtained through tests. Finally, the quad-rotor with the anti-windup based PI attitude controller is developed and a hovering attitude control flight tests are performed. As a result, the developed quad-rotor is capable of stable hovering.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.1
• /
• pp.135-142
• /
• 2008

This paper deals with the design of a robust PI controller for a vehicle suspension system. A method, which is related to computation of all stabilizing PI controllers, is applied to the vehicle suspension system in order to obtain optimum control between passenger comfort and driving performance. The PI controller parameters are calculated by plotting the stability boundary locus in the $(k_p,\;k_i)$-plane and illustrative results are presented. In reality, like all physical systems, the vehicle suspension system parameters contain uncertainty. Thus, the proposed method is also used to compute all the parameters of a PI controller that stabilize a vehicle suspension system with uncertain parameters.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.74-81
• /
• 2014

In this study, a brain emotional learning-based intelligent controller (BELBIC) is developed for the speed control of an interior permanent magnet synchronous motor (IPMSM). A novel and simple model of the IPMSM drive structure is established with the intelligent control system, which controls motor speed accurately without the use of any conventional PI controllers and is independent of motor parameters. This study is conducted in both real time and simulation with a new control plant for a laboratory 3 ph, 3.8 Nm IPMSM digital signal processor (DSP)-based drive system. This DSP-based drive system is then compared with conventional BELBIC and an optimized conventional PI controller. Results show that the proposed method performs better than the other controllers and exhibits excellent control characteristics, such as fast response, simple implementation, and robustness with respect to disturbances and manufacturing imperfections.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.256-261
• /
• 2004

This paper presents a simple two-degree of freedom PID tuning table based on the CDM design method. The structure of the control system will be composed of plant, P or PI or PID controller and a pre-filter. The finalized formula can be used based on the experimental test of the plant in the same manner as the Ziegler-Nichols' second method. That is; users just need to find the critical gain and critical period experimentally and the parameters of the P, PI or PID controller with the pre-filter can be obtained by substituting the values of critical gain and critical period in the tuning table. The simulation results of the control systems utilizing the proposed controllers compared with those using the Ziegler-Nichols' second method will also be demonstrated.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.425-434
• /
• 2001

In this paper, a series of processes to configure a feedback control system by using a PID controller in a programmable logic controller (PLC). The PLC (SIMATIC S7-400) with a PID module (FM455C) is connected by online to an IBM PC with the Windows environment, which serves as a PLC programmer. PID controllers including P/PD/PI controllers have been designed in order to show design procedures, and finally, a PID controller for the plant of cart system. Performances of the control system have been investigated by the MATLAB simulation, the simulation in the PLC programmer. Physical performances have been recorded and examined for the real cart system.