• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.682-687
• /
• 2010

The IEEE 802.15.4a specification targets the low-rate (LR) Impulse-radio (IR) ultra-wideband (UWB) system which is now widely applied in the WPANs considering rather short distance communications with low complexity and power consumption. The physical (PHY) layer uses concatenated coding with mixed binary phase-shift keying and binary pulse-position modulation (BPSK-BPPM), and direct sequence spreading with time hopping in order that both coherent and non-coherent receiver architectures are supported. In this paper, the performances of multiple access schemes compliant with IEEE 802.15.4a specification are investigated with energy detection receiver, which allow avoiding the complex channel estimation needed by a coherent receiver. However, the performance of energy detection receiver is severely degraded by multi-user interference (MUI), which largely diminishes one of the most fascinating advantages of UWB, namely robustness to MUI as well as the possibility to allow parallel transmissions. So as to improve the performance of multiple access schemes, we propose to apply the novel TH sequences as well as to increase the number of TH positions. The simulation results show that our novel multiple access schemes significantly improve the performance against MUI.

• Journal of Biomedical Engineering Research
• /
• v.8 no.1
• /
• pp.57-62
• /
• 1987

A three-dimensional thoracic model was constructed using 8-node trilinear hexahedron elements. A three-dimensional steady-state finite element code was developed using FORTRAN. Its output consists of potential at each node. current In each element, and total current In each layer in the z-direction. The thoracic model was Implemented to calculate basal impedance(Zo) In Impedance CardiograPhy Generalized Laplace's equation was solved with Dirlchlet(constant potentials) and homogeneous Neumann(no flux) boundary conditions. It was found that the con structed thoracic model was reasonable since the calculated potential differences between the adjacent electrodes and basal impedance were about the same as the measured ones.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2010

In Wireless Sensor Network, transmission errors are frequently occurred due to the node failure, battery discharge, and interference by objects. Although Directed Diffusion has been considered as a prominent Data-centric routing algorithm, it revealed some weaknesses at this kind of unexpected network errors. In order to address the problem, we proposed a radio-aware routing algorithm for improving reliability of Directed Diffusion in Wireless Sensor Networks. The proposed algorithm is aware of the network status based on the radio information of MAC and PHY layers using a cross-layer approach. The link quality and the node failure information from the acquired network status were used to decide an alternative path to provide a reliable data transmission in error-prone sensor networks. The proposed algorithm showed its effectiveness of the data delivery rate and data ratio with several simulations consisting of various error rates and the number of nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1276-1285
• /
• 2015

Full-duplex communications have emerged as a key technology for next-generation wireless local area networks (WLANs). Although the key enabling technology for full-duplex communications is the self-interference cancellation (SIC) technique in the physical layer, the employment of full-duplex communications has huge potentials to substantially increase the throughput at the medium access control (MAC) layer. At the same time, full-duplex communications pose non-trivial challenges to the MAC protocol design. In this article, we first identify salient problems in supporting full-duplex communications in WLAN MAC protocols. After that, we survey the state-of-the art to address those problems and analyze their pros and cons. Finally, we present open research challenges to improve the effectiveness of full-duplex communications in WLANs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.188-194
• /
• 2007

In order to become ubiquitous world, the compatibility of wireless machines has become the significant characteristic of a communication terminal. Thus, SDR is the most necessary technology and standard. However, among the environment which has different communication protocol, it's difficult to make a terminal with only hardware using ASIC or SoC. This paper suggests the processor that can accelerate several communication protocol. It can be connected with main-processor, and it is specialized PHY layer of network The C-program that is modeled with the wireless protocol IEEE802.11a and IEEE802.11b which are based on widely used modulation way; OFDM and CDM is compiled with ARM cross compiler and done simulation and profiling with Simplescalar-Arm version. The result of profiling, most operations were Viterbi operations and complex floating point operations. According to this result we suggested a co-processor which can accelerate Viterbi operations and complex floating point operations and added instructions. These instructions are simulated with Simplescalar-Arm version. The result of this simulation, comparing with computing only one ARM core, the operations of Viterbi improved as fast as 4.5 times. And the operations of complex floating point improved as fast as twice. The operations of IEEE802.11a are 3 times faster, and the operations of IEEE802.11b are 1.5 times faster.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.101-113
• /
• 2008

The new wireless multimedia environment is coming because of the variety of an user requirement and a traffic increase which we can not accept in the IMT-2000 present systems. To offer the wireless multimedia service the world wireless communication company which included the ITU-R is developing the standard and technique of 4G systems. We analyzed the technique criteria of the 4G wireless communication system in this paper which is based on that of WiBro System. The mobile communication traffic is predicted Up/Down-link of non-symmetric in the future. And we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. And we verified this through the simulation. So we proposed the technique criteria for 4G wireless communication in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.73-81
• /
• 2011

IEEE 802.11 PHY and MAC layer provide multiple channels and data rates. To improve the performance of IEEE 802.11 multi-radio ad hoc networks, it is required to utilize available channels and data rates efficiently. However, in IEEE 802.11 multi-rate networks, the rate anomaly (RA) problem occurs that the network performance is severely degraded as low-rate links affect high-rate links. Hence, in this paper, we propose a model-based rate separation (MRS) algorithm that uses multiple channels to separate different data rate links so that the RA problem is mitigated. MRS algorithm utilizes an existing throughput model that estimates the throughput of IEEE 802.11 single-hop networks to separate low-rate links and high-rate links. Through simulations, we demonstrate that the MRS algorithm shows improved network performance compared with existing algorithms in multi-radio ad hoc networks.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.10-18
• /
• 2007

Today, third-generation(3G) of mobile communication service executing the video and TV. And low cost, high speed data rate will emerge communication of the fourth generation(4G) in future. So, in this paper we studied occupied frequency bandwidth of common technique criteria among the technique criteria for the 4G mobile communication of FDD-based on Up/Down-link. The mobile communication traffic is predicted Up/Down-link of non-symmetric in future. So we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. We also verified this through the simulation. We proposed the occupied frequency bandwidth for the 4G mobile communication in this paper.