• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.95-105
• /
• 2010

IEEE 802.15.4 is the one of the protocols for radio communication in a personal area network. Since it aims to provide low cost and low power communication for ubiquitous communication, it requires high level of optimization in implementation. Recently, there have been many studies on the performance evaluation of IEEE 802.15.4 MAC protocol. According to the results of the studies, it is tendency that the transceiver is implemented to SoC type. On the implementation, the specific functions of MAC like CSMA-CA and MAC frame handling is designed to hardwired functions. In this paper, we implemented the protocol with hardwired low MAC (HL-MAC) and its state machine for the optimization from the physical layer and MAC layer. it has the characteristics of the small code size and the enhanced power consumption.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.411-422
• /
• 2021

The autonomous driving system mounted on the unmanned vehicle recognizes the external environment through several sensors and derives the optimum control value through it. Recently, studies on physical level attacks that maliciously manipulate sensor data by performing signal-injection attacks have been published. signal-injection attacks are performed at the physical level and are difficult to detect at the software level because the sensor measures erroneous data by applying physical manipulations to the surrounding environment. In order to detect a signal-injection attack, it is necessary to verify the dependability of the data measured by the sensor. As so far, various methods have been proposed to attempt physical level attacks against sensors mounted on autonomous driving systems. However, it is still insufficient that methods for defending and detecting the physical level attacks. In this paper, we demonstrate signal-injection attacks targeting MEMS sensors that are widely used in unmanned vehicles, and propose a method to detect the attack. We present a signal-injection detection model to analyze the accuracy of the proposed method, and verify its effectiveness in a laboratory environment.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.4
• /
• pp.346-356
• /
• 2021

Purpose: Campylobacter species are currently the most common cause of bacterial gastroenteritis. In Lebanon, Campylobacter infection occurrence is underdiagnosed owing to the lack of specific culture and rapid test kits, particularly among children. This study aimed to evaluate the prevalence, laboratory findings, and clinical characteristics of Campylobacter infection in hospitalized children with acute gastroenteritis in South Lebanon. Methods: We conducted a 6-month retrospective cohort study between January and June 2018, including 291 children aged between 1 month and 12 years, who were admitted to a tertiary healthcare center in South Lebanon. The medical files of the patients were reviewed to retrieve the required clinical information, including clinical and laboratory data. Results: The prevalence of campylobacteriosis agents in pediatric patients with acute gastroenteritis is 12.02%. Patients infected with Campylobacter had more severe acute gastroenteritis than Campylobacter-negative patients and often presented with high-grade fever, diarrhea episodes more than six times per day, diarrhea lasting for more than five days, and dehydration. Indeed, children with high-grade fever (≥38.5℃) were five times more likely to test positive for Campylobacter than those with low-grade fever. In addition, the results showed a higher Vesikari score for the majority of Campylobacter-positive patients with severe acute gastroenteritis compared to a moderate profile for Campylobacter-negative patients. Conclusion: The present study findings highlight that Campylobacter infection is frequent among children with acute gastroenteritis. Therefore, the detection of Campylobacter should be carried out for the diagnosis of human gastroenteritis in Lebanon, along with the detection of routine enteropathogens.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2016

In this paper, we propose a hybrid multi.system-on-chip (H-MSoC) architecture that provides a high-flexibility system in a rapid development time. The H-MSoC approach provides a flexible system-on-chip (SoC) architecture that is easy to configure for physical- and application-layer development. The physical- and application-layer aspects are dynamically designed and modified; hence, it is important to consider a design methodology that supports rapid SoC development. Physical layer development refers to intellectual property cores or other modular hardware (HW) development, while application layer development refers to user interface or application software (SW) development. H-MSoC is built from multi-SoC architectures in which each SoC is localized and specified based on its development focus, either physical or application (hybrid). Physical HW development SoC is referred to as physical-SoC (Phy-SoC) and application SW development SoC is referred to as application-SoC (App-SoC). Phy-SoC and App-SoC are connected to each other via Ethernet. Ethernet was chosen because of its flexibility, high speed, and easy configuration. For prototyping, we used a LEON3 SoC as the Phy-SoC and a ZYNQ-7000 SoC as the App-SoC. The proposed design was proven in real-time tests and achieved good performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1373-1392
• /
• 2017

WiFi Direct (WD) is a state of the art technology for a Device-to-Device (D2D) communication in 802.11 networks. The performance of the WD system can be significantly affected by some key factors such as the type of application, specifications of MAC and PHY layer parameters, and surrounding environment etc. It is, therefore, important to develop a system model that takes these factors into account. In this paper, we focus on investigating the design parameters of the PHY layer that could maximize the efficiency of the WD 802.11 system. For this purpose, a basic theoretical model is formulated for a WD network under a 2x2 Multiple In Multiple Out (MIMO) TGn channel B model. The design level parameters such as input symbol rate and antenna spacing, as well as the effects of the environment, are thoroughly examined in terms of path gain, spectral density, outage probability and Packet Error Rate (PER). Thereafter, a novel adaptive algorithm is proposed to choose optimal parameters in accordance with the Quality of Experience (QoE) for a targeted application. The simulation results show that the proposed method outperforms the standard method thereby achieving an optimal performance in an adaptive manner.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.53-65
• /
• 2012

Recently wireless intra-vehicle communication has received a great interest from the automotive industry and ultra wideband (UWB) technology is considered as one of the potential candidate for this system. Many research works have been done on the measurement and modeling of intra-vehicle communication channel. However, very little work has been reported for the performance analysis of various PHY layer methods under the intra-vehicle communication environment. This paper is to study IEEE 802.15.4a standard in intra-vehicle channel and to evaluate its performance. Channel model in chassis and engine compartment is considered for evaluation. Through simulation BER performance of system with different receiver structures is analyzed.

• Proceedings of the Korean Society of Potoscience Conference
• /
• spring
• /
• pp.97-103
• /
• 2003

Phytochrome controls diverse aspects of plant development in response to the ambient light conditions. HFRl, a basic helix-loop-helix protein, is required for a subset of phytochrome A (phy A)-mediated photo-responses in Arabidopsis. Here, we show that overexpression of HFR1-N105, but not the one of the full-length HFR1, confers exaggerated photo-responses. The transgenic plants overexpressing HFR1- N105 exhibited light-independence in a subset of photo-responses, including germination, de-etiolation, gravitropic hypocotyl growth, and blocking of greening. Overexpression of HFR1-N105 also caused constitutive light-responses in the expression of some light-regulated genes. In addition, the HFR1-N105 overexpressor showed hypersensitive responses under R and FR light, dependently on phyB and phyA, respectively. End-of-day far-red light response and petiole elongation were suppressed in the HFR1-N105 overexpressor plants. Together these results imply that overexpression of HFR1-N105 activated a branch of light signaling, supporting the hypothesis that transcriptional regulation in the nucleus would be the primary mechanism of light signaling in Arabidopsis. We discuss the biotechnological potential of the mutant bHLH protein, HFR1-N105 in regard to suppressed shade avoidance syndrome.

• Journal of Integrative Natural Science
• /
• v.1 no.1
• /
• pp.24-31
• /
• 2008

Brassinosteroids (BRs) are a special class of plant steroid hormones that are essential for normal growth and development. Part of confusion is whether BRs are unique to plants, because they have overlapping physiological roles with other better-studied hormones and with physiological responses caused by light. In systems designed to assay for cytokinins, the effects of BRs vary. We measured hypocotyl length for testing the ability of brassinolide (BL) to rescue double mutant between det2 and the photoreceptor null mutant phytochrome B (phyB). PHYB involved in controlling hypocotyl elongation in increased concentration of BL whereas phyBdet2 double mutant just partially rescue to phyB in white and red light indicated the involvement of BRs in PHYB regulated cell elongation. BRs regulated hypocotyl growth was delayed by BAP, a cytokinin treatment but inhibitory effects of BAPs on hypocotyl growth was slightly recovered by BL. The result indicated that the mode of action of BR and cytokinin is independent or sequential in the downstream light-regulated response control on hypocotyl elongation and also light modulated the action of BR and cytokinin in some extent.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.463-470
• /
• 2014

A Verilog model is proposed for transmission lines to perform the all-Verilog simulation of high-speed chip-to-chip interface system, which reduces the simulation time by around 770 times compared to the mixed-mode simulation. The single-pulse response of transmission line in SPICE model is converted into that in Verilog model by converting the full-scale analog signal into an 11-bit digital code after uniform time sampling. The receiver waveform of transmission line is calculated by adding or subtracting the single-pulse response in Verilog model depending on the transmitting digital code values with appropriate time delay. The application of this work to a USB 2.0 high-speed PHY interface reduces the simulation time to less than three minutes with error less than 5% while the mixed-mode simulation takes more than two days for the same circuit.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.394-406
• /
• 2023

In this study, a real-time surveillance system using Internet of Things technology is proposed for vaccine cold chains. This system fully visualizes vaccine transport and storage. It comprises a 4G gateway module, lowpower and low-cost wireless temperature and humidity collection module (WTHCM), cloud service software platform, and phone app. The WTHCM is installed in freezers or truck-mounted cold chain cabinets to collect the temperature and humidity information of the vaccine storage environment. It then transmits the collected data to a gateway module in the radiofrequency_physical layer (RF_PHY). The RF_PHY is an interface for calling the bottom 2.4-GHz transceiver, which can realize a more flexible communication mode. The gateway module can simultaneously receive data from multiple acquisition terminals, process the received data depending on the protocol, and transmit the collated data to the cloud server platform via 4G or Wi-Fi. The cloud server platform primarily provides data storage, chart views, short-message warnings, and other functions. The phone app is designed to help users view and print temperature and humidity data concerning the transportation and storage of vaccines anytime and anywhere. Thus, this system provides a new vaccine management model for ensuring the safety and reliability of vaccines to a greater extent.