• Title/Summary/Keyword: PHR1

Search Result 190, Processing Time 0.04 seconds

Electrical Properties of XLPE Power Cable by DCP and TMPTA Content (전력 cable용 XLPE의 제조과정 중 가교제와 가교조제의 함량이 미치는 전기적 특성)

  • Kim, Gyu-Sik;Lim, Kee-Joe;Ryu, Boo-Hyung;Park, Soo-Gil
    • Proceedings of the KIEE Conference
    • /
    • 2000.07c
    • /
    • pp.2077-2080
    • /
    • 2000
  • We studied about electrical, chemical and mechanical characteristics of XLPE by dicumyl peroxide(DCP) and trimethylolpropane triacrylate(TMPTA) content ratio. DCP content was changed from 1.0 to 2.5phr increasing 0.5phr. TMPTA content was changed 0.5 to 1.5phr increasing 0.5phr. Thermal analysis (DSC) was carried out in order to observe tendency of 79 according to DCP and TMPTA content. In experimental results, content DCP 2.0phr and TMPTA 1.0phr has highest breakdown strength. Content DCP 2.0phr and TMPTA 0.5phr has lowest dielectric constant. Tendency of Tg did not affected by DCP and TMPTA content. Breakdown strength and Specific inductive capacity was measured.

  • PDF

Recognition of Personal Health Record (개인보건정보기록에 대한 인지도)

  • Bae, Se-Eun;Kim, Ha-Yeon;Son, Hyeon-S.;Rhee, Hyun-Sill
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.4
    • /
    • pp.1703-1710
    • /
    • 2011
  • Objectives: Using a PHR(Personal Health Record) is very important for the management of chronic disease and health. The young age group in this study was asked to pretend that they were members in the old age group (adult group here after) in order to investigate the recognition level differences in such conditions. Methods: We conducted face to face surveys with two age groups. 131 Adults and 398 University students, from May 11 to 22 in 2009. The questionnaires were composed of 18 items. Results & Conclusion: Adults replied more favorably than University students in using PHR willingness(University group 3.3score, Adults 3.7score) and recommendation(university 3.1score, Adults 3.8score). Adults liked paper PHR (63.2%), whereas, University students favored electronic Personal Health Record (71.1%). University students were highly concerned about disclosing the information(4.5score) of their PHR. They thought the appropriate time of education for PHR is high school or University degree. Therefore, in the future, it is vital that a PHR for young age group should be begun in early education and that an ePHR should be developed.

A $G_{4}$ Sequence within PHR1 Promoter Acts as a Gate for Cross-Talks between Damage-Signaling Pathway and Multi-Stress Response

  • Jang, Yeun-Kyu;Kim, Eun-Mi;Park, Sang-Dai
    • Animal cells and systems
    • /
    • v.6 no.3
    • /
    • pp.271-275
    • /
    • 2002
  • Rph1 and Gisl are damage-responsive repressors involved in PHR1 expression. They have two $C_{2}$H/ sub 2/ zinc finger motifs as putative DNA binding domains and N-terminal conserved domain with unknown function. They are also found in the human retinoblastoma binding protein 2 and the mouse jumonji- encoded protein. The repressors are able to bind to A $G_{4}$ sequence within a 39-bp sequence called upstream repressing sequence of PHR1 promoter (UR $S_{PHR1}$) responsible for the damage-response of PHR1. We report here that Rph1 is predominantly localized in the nucleus as examined by fluorescence microscopic analysis with GFP-Rph1 fusion protein. On the basis of the fact that the A $G_{4}$ sequence that is recognized by Rph1 and Gisl is also recognized by Msn2 and Msn4 in a process of stress response, we a1so tried to examine the in vivo function of A $G_{4}$ and the role of Msn2 and Msn4 in PHR1 expression. Our results demonstrate that Msn2 and Msn4 are actually required for the basal transcription of PHR1 expression but not for its damage induction. When A $G_{4}$ sequence was inserted into the minimal promoter of the cyc1-LacZ reporter, the increased LacZ expression was observed indicating its involvement in transcriptional activation. The data suggest that the A $G_{4}$ is primarily required for basal transcriptional activation of PHR1 or CYC1 promoter through the possible involvement of Msn2 and Msn4. However, since the A $G_{4}$ is also involved in the repression of PHR1 via Rphl and Gisl, it is proposed that A $G_{4}$ functions as either URS or upstream activating sequence (UAS) depending on the promoter context.t.

Insulation properties of XLPE by adding Cross-linking Agent and Cross-linking Agent and Cross-linking Co-agent (가교제와 가교조제 함량에 따른 XLPE의 절연특성)

  • 김규식;임기조;손원근;박수길
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.07a
    • /
    • pp.715-718
    • /
    • 2000
  • We studied about electrical, chemical and mechanical characteristics of XLPE by dicumyl peroxide(DCP) and trimethylolpropane triacrylate(TMPTA) content ratio. DCP content was changed from 1.0 to 2.Sphr increasing 0.5phr. TMPTA content was changed 0.5 to 1.5phr increasing 0.5phr. Thermal analysis (DSC) was carried out in order to observe tendency of Tg according to DCP and TMPTA content. Tensile strength was measured in order to observe mechanical strength. In experimental results, content DCP 2.0phr and TMPTA 1.0phr has highest breakdown strength. Content DCP 2.0phr and TMPTA 0.5phr has lowest dielectric constant. Tendency of Tg did not affected by DCP and TMPTA content. Breakdown strength and Specific inductive capacity was measured.

  • PDF

Planar Hall Resistance Sensor for Monitoring Current

  • Kim, KunWoo;Torati, Sri Ramulu;Reddy, Venu;Yoon, SeokSoo
    • Journal of Magnetics
    • /
    • v.19 no.2
    • /
    • pp.151-154
    • /
    • 2014
  • Recent years have seen an increasing range of planar Hall resistive (PHR) sensor applications in the field of magnetic sensing. This study describes a new application of the PHR sensor to monitor a current. Initially, thermal drift experiments of the PHR sensor are performed, to determine the accuracy of the PHR signal output. The results of the thermal drift experiments show that there is no considerable drift in the signals attained from 0.1, 0.5, 1 and 2 mA current. Consequently, the PHR sensor provides adequate accuracy of the signal output, to perform the current monitoring experiments. The performances of the PHR sensor with bilayer and trilayer structures are then tested. The minimum detectable currents of the PHR sensor using bilayer and trilayer structures are $0.51{\mu}A$ and 54 nA, respectively. Therefore, the PHR sensor having trilayer structure is the better choice to detect ultra low current of few tens nanoampere.

A Study on the Dielectric Properties of Silicone Rubber Filled with Silica (실리카 충진된 실리콘 고무의 유전 특성에 관한 연구)

  • Lee, Sung Ill
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.26 no.11
    • /
    • pp.810-815
    • /
    • 2013
  • In this study, the capacitance and dielectric loss tangent of the silicone rubber which is combined with filler (30 phr~50 phr) have been measured on the range of 100 Hz~100 kHz and $30{\sim}170^{\circ}C$. It was found that when the frequency is 0.1 kHz~100 kHz and the silicone rubber is combined with 30 phr to 50 phr of filler, the capacitance of silicone rubber has increased by about 28.6 pF to 33 pF in 30 phr of filler, about 20 pF to 46.1 pF in 40 phr of filler and about 36.4 pF to 44 pF in 50 phr of filler. It seems that the volume of dielectric loss has gradually increased due to the temperature rise and the rotating of dipole in electric field through the electric dipole generated by the Si-O group which is induced by adding of filler, or the carbonyl group which is caused by oxidation. It seems that the dielectric dispersion in 0.1 kHz is caused by molecular motion of Siloxane group in main chain, and the dielectric dispersion in 10 kHz is caused by molecular motion of Methyl group in side chain.

Synergistic effect of clay and polypropylene short fibers in epoxy based ternary composite hybrids

  • Prabhu, T. Niranjana;Demappa, T.;Harish, V.;Prashantha, K.
    • Advances in materials Research
    • /
    • v.4 no.2
    • /
    • pp.97-111
    • /
    • 2015
  • Polypropylene short fiber (PP)-clay particulate-epoxy ternary composites were prepared by reinforcing PP short fiber and clay particles in the range of 0.1 phr to 0.7 phr into epoxy resin. Prepared hybrid composites were characterized for their mechanical, thermal and flame retardant properties. The obtained results indicated an increase in impact resistance, tensile strength, flexural strength and Young's modulus to an extent (up to 0.5 phr clay and 0.5 phr PP short fiber) and then decreases as the reinforcing phases are further increased. The thermal stability of these materials are found to increase up to 0.2 phr clay and 0.2 phr PP addition, beyond which it is decreased. Addition of clay is found to have the negative effect on epoxy-PP short fiber composites, which is evident from the comparison of mechanical and thermal properties of epoxy-0.5 phr PP short fiber composite and epoxy-0.5 phr PP short fiber-0.5 phr clay composite hybrid. UL-94 tests conducted on the composite hybrids have showed a reduction in the burning rate. Morphological observations indicated a greater fiber pull with the addition of clay. The performed tests in the present study indicated that materials under investigation have promising applications in construction, agriculture and decorative purposes.

Physical and Chemical Properties of Cross Linked Polyethylene (Cross Linked Polyethylene의 물리적 및 화학적 성질)

  • 김한주;김규식;박종은;박수길;임기조
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1999.11a
    • /
    • pp.516-519
    • /
    • 1999
  • XLPE (Cross-Linked Polyethylene) which has good electric and physical characteristic is ideal material for Insulating material with force high volumetric resistance arid high dielectric constant. We study abort electric characteristics of XLPE by DCP and TMPTA content ration. DCP (Dicumylperoxide), which was used cross-linked agent contest, was changed from 1.0 to 0.5phr. TMPTA (Trimethyl-olpropane), which was used co cross-linked agent content, was changed from 0.5 to 1.5phr. Thermal analysis by DSC in order to observe tendency of Tg according to DCP and TMPTA content. Specimen 3 that content DCP 2.0phr and TMPTA 0.5phr has the highest value Breakdown strength cf specimen 3 (DCP 2.Ophr, TMPTA 1.0phr) is the highest, value and it increased in specific inductive capacity. This due to difference from cross-linked state by DCP and TMPTA content ratio.

  • PDF

Shear Behavior of $Carbon/BMI({\pm}45^{\circ})_{2s}$By Acoustic Emission (음향방출을 통한 $Carbon/BMI({\pm}45^{\circ})_{2s}$의 전단 거동)

  • Lee, Taek-Su;Lee, Jong-Mun;Lee, Jae-Rak
    • Korean Journal of Materials Research
    • /
    • v.4 no.8
    • /
    • pp.888-894
    • /
    • 1994
  • In detail of fracture and mechanical properties to carbon/BMI$(\pm 45^\circ)_{2s}$ discusses by acoustic emission and tensile testing. The bismaleimide resin from Boots Technochemie Co. was toughened by TM 120 from same Co. The weight proportions of TM 120 were fixed as 0, 5, 10, 15, 20, 25phr. The 0.2phr of 1, 4-diazobicyclo-(2, 2, 2)-octane(DABC0) was used as the accelerator. The used carbon fiber was T300 from Toray Co. The optimum additional proportion of TM120 was proved as 20phr by mechanical testing and at the same time by the results of acoustic emission. toughening agent gives significant influences on the fracture phenomena and mechanical strength.

  • PDF

Study on the Compositional Construction of Epoxy Based Powder Paint (환경친화형 에폭시계 분체도료의 조성구축 연구)

  • Lim, Hong-Joon;Chung, Kyung-Ho
    • Clean Technology
    • /
    • v.12 no.1
    • /
    • pp.27-35
    • /
    • 2006
  • Main compositions of powder paint based on thermoset type epoxy resin consist of epoxy resin for powder coating, curing agent, filler and pigment. The curing system used in this study was based on diglycidyl ether of bisphenol-A (DGEBA) and dicyan diamide (DICY). The curing behavior and rheological properties of powder coating material were investigated using DSC and rheometer, respectively. And the adhesion strength between steel and powder coating material was measured using lap shear geometry. The optimum formulation of epoxy powder paint obtained from this study was base resin of 100 phr, DICY of 6 phr, $CaCO_3$ of 20 phr, and $TiO_2$ of 10 phr.

  • PDF