• Resources Recycling
• /
• v.23 no.2
• /
• pp.3-16
• /
• 2014

Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.283-290
• /
• 2000

The present study was carried out to investigate the blood markers of Cheju horses. The blood protein types (biochemical polymorphism) were tested from 73 Cheju native horses (CNH) and 118 Cheju racehorses(CRH) by horizontal polyacrylamide gel electrophoresis (HPAGE), isoelectric focusing (IEF) and starch gel electrophoresis (SGE). At the same time, their phenotypes and gene frequencies were studied. The biochemical polymorphism phenotypes observed with high frequency were A1B-KK(97.3%), ALB-AB(49.3%), AP-SS(100%), ES-II(30.1%), GC-FF(87.7%), HB-BIBI(49.3%), TF-F2R(41.1%), TF-EF2(8.2%), PGD-FF(97.3%), PGM-SS(50.7%), GPI-II(74.0%) in CNH, While A1B-KK(99.2%), ALB-BB(50.8%), AP-SS(99.2%), ES-II(42.4%), ES-IS(14.4%), GC-FF(95.8%), HBB-IB II(39.8%), TF-F2R(21.2%), PGD-FF(77.1%), PGD-SS(4.3%), PGM-SS(72.9%), GPI-II(90.7%) in CRH. Alleles observed with high frequency were $AlB^{K}$(0.986), $ALB^{B}$(0.616), $AP^{S}$(1.000), $ES^{I}$(0.479), $ES^{F}$(0.274), $GC^{F}$(0.938), $GPI^{I}$(0.856), $HB^{BI}$(0.685), $PGD^{F}$(0.993), $PGM^{S}$(0.753), $TF^{F2}$(0.404), $TF^{R}$(0.397) in CNH and $AlB^{K}$(0.996), $ALB^{B}$(0.720), $AP^{S}$(0.996), $ES^{I}$(0.661), $ES^{F}$(0.203), $GC^{F}$(0.979), $GPI^{I}$(0.936), $HB^{BI}$(0.534), $PGD^{F}$(0.864), $PGM^{S}$(0.852), $TF^{F2}$(0.428), $TF^{R}$(0.272) in CRH. $TF^{E}$(0.041) allele and silent gene($ES^{I{^*}}$ : 0.014) were observed in CNH. The mean heterozygosity in CNH and CRH was observed 0.2974 and 0.2864, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.35-40
• /
• 2023

For the EMC test, the radiation characteristics and immunity characteristics of the EUT are measured under the condition that the EUT maintains its normal operation. For normal operation of the EUT, it is necessary to operate the EUT and monitor its status through separate equipment outside the anechoic chamber. External equipment operates and monitors the EUT through various communications such as 1553B communication, RS-485 communication, and Ethernet communication. At this time, external equipment can transmit noise through the communication line. This noise is transmitted to the LISN through the connected power cable and measured. It is also radiated through the connection terminal to the LISN. In this case, the communication line is the power line It should be designed so that noise is not transmitted through electromagnetic isolation as much as possible. In addition, noise from external equipment must be suppressed as much as possible from entering the chamber through the communication line. In this paper, external EUT test equipment applied for EMC test It explains the considerations in the design and manufacture of the design and explains the satisfaction of the design through tests including CE and RE.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.709-718
• /
• 2017

This paper proposes the guidance laws for an agile turn of air-to-air missiles during the initial boost phase. Optimal solution for the agile turn is obtained based on the optimal control theory with a simplified missile dynamic model. Angle-of-attack command generating methods for completion of agile turn are then proposed from the optimal solution. Collision triangle condition for non-maneuvering target is reviewed and implemented for update of terminal condition for the agile turn. The performance of the proposed method is compared with an existing homing guidance law and the minimum-time optimal solution through simulations under various initial engagement scenarios. Simulation results verify that transition to homing phase after boost phase with the proposed method is more effective than direct usage of the homing guidance law.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1085-1093
• /
• 2010

This paper proposes a multiple filter for reduction of received signal fluctuation and enhancement of step altitude edge detection in FMCW radar altimeter. The proposed filter was composed of alpha-trimmed mean filter, frequency variation limiter, and 1/3 order static filter. Simulations by analysis of received signal show that the proposed filter provides better performance than moving average and standard median filters with error reduction. In particular, the proposed filter was improved in the ability of reducing fluctuation for ground hovering.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.337-344
• /
• 2017

In this paper, the optical axis alignment(OAA) of an infrared sensor(IRS) using a microwave sensor(MWS) was presented as a method of an axis alignment to minimize the problems that could be caused by the misalignment of the two sensors in the missile including the dual-mode sensor. The azimuth(AZ) and elevation(EL) angles of the two targets used for each sensor test were calculated by using the transformation equation and the test results of the MWS and IRS, and then the proposed OAA was verified by comparing the angles. Furthermore, the validity of the proposed OAA was demonstrated by confirming the abnormality of the OAA through the test results of the electro optical head(EOH) of the IRS which was equipped with a tilt on the missile fuselage.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.124-134
• /
• 2019

As the types of North Korea's provocation are diverse and unexpectable in the costal area, ROK navy needs to develop countermeasures, such as costal defence guided rockets. Recently ROK navy developed the PKX-B which is equipped with the new 130 mm guided rocket. The most popular rockets are LOGIR for short range targets, 130 mm guided rocket for middle range targets and Spike-NLOS for long range targets. As various guided rockets are developed, it is required to develop a guided rocket analysis model and it's analysis methodology. In addition, these guided rockets can be installed on any platforms; ground vehicle, aircraft and warship. The paper proposes systematic methodology to estimate the operational effectiveness of costal defence guided rockets. A case study exploiting the ARENA simulation model is explained to demonstrate the implementation of the proposed methodology.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.39-44
• /
• 2024

In order to prevent accidents via defective ammunition, this paper analyzes recent research on ammunition life prediction methodology. This workanalyzes current shelf-life prediction approaches by comparing the pros and cons of physical modeling, accelerated testing, and statistical analysis-based prediction techniques. Physical modeling-based prediction demonstrates its usefulness in understanding the physical properties and interactions of ammunition. Accelerated testing-based prediction is useful in quickly verifying the reliability and safety of ammunition. Additionally, statistical analysis-based prediction is emphasized for its ability to make decisions based on data. This paper aims to contribute to the early detection of defective ammunition by analyzing ammunition life prediction methodology hereby reducing defective ammunition accidents. In order to prepare not only Korean domestic war situation but also the international affairs from Eastern Europe and Mid East countries, it is very important to enhance the stability of organizations using ammunition and reduce costs of potential accidents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.223-229
• /
• 2020

The current technological advances are changing the way people live. In the history of war in the past, nations or people with an edge in military science and technology have always been the victor. The emergence of new technologies not only alters war patterns drastically but also affects military operational concepts and organizational systems. As the paradigm of the security environment changes, developed countries are investing heavily in defense R & D for their security. Therefore, the importance of professionalism of the defense acquisition personnel who perform their tasks from the exploration and development of weapon systems to mass production, deployment, and logistics support cannot be overemphasized. In the United States, an advanced country in this field, to improve the work efficiency of acquisition personnel in the defense field, the Directive of Ministry of Defense issued a law on education and training career development for personnel in 1990. The present study refers to related materials, such as the Desk Guide for the main education requirements for the US acquisition personnel in the military field, which contributes to the improvement of the workforce of the acquired manpower after the systematic education system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.2
• /
• pp.114-120
• /
• 2001

Ginkgo biloba L. has been planted in the city as street trees because reported as resistant species to air pollutant. Especially, the trees planted on the street of 'Cheongro', Mt. 'Nam', and 'Jamsil' have been exposed to air pollutant for a long time. This study was conducted to examine chlorophyll contents and genetic variation of Ginkgo biloba in the areas. Chlorophyll contents measured in the above three areas were variable although the the diameter at breast height measured in 'Cheongro' and Mt. 'Nam' were constant. In addition, the result showed positive relation between chlorophyll contents and DBH in this study. Eight enzyme systems were analyzed in megagametophytes which were collected in the areas and separated to two groups based on chlorophyll contents. All the enzymes appeared to be polymorphic : Got-2, Pgi-2, Pgm, Acon, Mnr, Mdh, Skdh, and 6Pgd. The sensitive (S) groups varied from 1.253 to 2.571 in the genetic diversity and the tolerant (T) groups ranged from 1.416 to 2.825. The observed single locus heterozygosities (H$_{0}$) ranged from 0.056 to 0.611 in the S groups, and from 0.179 to 1.643 in the T groups. The expected heterozygosities (H$_{e}$) ranged from 0.208 to 0.629 in the S groups and from 0.321 to 0.658 in the T groups. In addition, the H$_{0}$ values averaged over all loci were 0.326 for the T groups and 0.299 for the S group, respectively. A difference between the two groups was 0.027. The T groups had the unique alleles and genotypes and all the parameters for genetic diversity showed that the T groups had higher genetic diversity than the S groups.s. genetic diversity than the S groups.