• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.107-114
• /
• 2024

In order to produce high-yield pitch-based activated carbon, pitch was synthesized by blending pyrolysis fuel oil (PFO) and coal-tar. Pitch was synthesized by varying the amount of coal-tar from 0~20% compared to PFO and reacting at 380~420 ℃ for 3 h. The synthesized pitch had a softening point between 80 and 260 ℃, and yields ranged from 10 to 40%. At all synthesis temperatures, as the coal-tar blending ratio increased, the yield increased and the softening point decreased. After considering the selected pitches (softening points: 230~260 ℃), pitches containing coal-tar were more volatile at a low boiling point and had a higher residual carbon content. This is a difference in the composition of coal-tar and PFO, and it was con- firmed that coal-tar has a lot of aromatics and PFO has a lot of aliphatics. The selected pitch was heated to 950 ℃ in a tubular reactor and physically activated with steam for 1 hour. Activated carbon containing coal-tar showed higher yield and microporosity compared to only PFO. In this study, the effect of increasing activated carbon yield by blending pitch raw materials was confirmed, and the physical activation characteristics according to the coal-tar mixing ratio were examined.

• Journal of Nutrition and Health
• /
• v.21 no.5
• /
• pp.295-304
• /
• 1988

To study effect of dietary polyunsaturated fatty acid and $\omega$-tocopherol content on lipid peroxidation in rat liver, rats were fed for 3, 6 and 9 weeks with normal tocopherol diet added 40mg of DL-$\alpha$-tocopherol/kg of diet (PF group), high tocopherol eit 200mg of DL-$\alpha$-tocopherol/kg of diet(PFE group), low tocopherol diet without addition of DL-$\alpha$-tocopherol to diet(PFO group), and control diet added 40mg of DL-$\alpha$-tocopherol/kg of diet(control group). Each diet group supplied 45% of total calorie from corn oil except control group which supplied 12% of total calorie from corn oil. After each feeding period, lipid peroxide and tocopherol contents were measured in the liver as well as activities of glutathione peroxidase and superoxide dismutase. PF group had almost the same contents of liver peroxide, tocopherol contents and activities of glutathione peroxidease and superoxide dimutase as control group, while PFE group had higher tocopherol content and glutathione peroxidase activity and lower lipid peroxide contents and superoxide dismutase activity than control group. On the other hand, changes in the values of PFO group were opposite to those of PFE group. Differences in the values among groups were more pronounced as feeding period became longer.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.205-208
• /
• 2014

Here, we reported mass-produced organic nanowires with uniform sizes based on poly(9,9-dioctylflurorene) (PFO), poly(9,9-dioctylfluorene-co-benzothiadiazole) (F8BT), (regioregular poly(3-hexylthiophene) (P3HT) which are well known as organic semiconductors for opto/electronics applications, using a melt-assisted wetting method with anodic alumina membrane. The conjugated polymer nanowires showed uniformed diameters (D=250~300 nm) and lengths ($L={\sim}30{\mu}m$) with defect free smooth surface regardless of a kinds of semiconductors. In addition, the nanowires were uniformly deposited onto glass substrates by spray-coating method. Under the UV light irradiation, PFO and F8BT nanowires showed blue and yellow emissions, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.40-44
• /
• 2017

The effect of weak dielectric silicone dioxide($SiO_2$) embedded in polyfluorene(PFO) emitting layer of polymer-based multi structure OLED was investigated. Indium tin oxide(ITO)/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)/poly(9,9-di-n-octylfluorenyl-2,7-diyl)(PFO)/2,2,2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi)/aluminum(Al) structure OLED was fabricated by spin-coating method. Applied electric field causes some effect on $SiO_2$ in PFO layer. Thus, interaction between polymers and affected $SiO_2$ might generate electrical and luminance properties change. Experimental results, show the reduced threshold voltage of 6 V(from 23 V to 17 V). The maximum current density was rather increased from $71A/m^2$ to $610A/m^2$ and maximum brightness was also increased from $7.19cd/m^2$ to $41.03cd/m^2$, 9 and 6 times each. Additionally we obtained colour broadening result due to the increasing of blue-green band emission. Consequently we observed that electrical and luminance properties are enhanced by adding $SiO_2$ and identified the possibility of controlling the emission colour of OLED device according to colour broadening.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.576-580
• /
• 2005

Porous graphite was prepared by elimination of the template after pyrolysis of PFO (pyrolized fuel oil) with catalyst Cobalt(II)-ethylhexanoate in interlayer space of magadiite template. Pyrolysis was conducted for 3~24 h at $900{\sim}1100^{\circ}C$. Graphite was well crystallized with increased pyrolysis time and temperature. Specific surface area was $261{\sim}400m^2/g$ depending upon mixing ratios, pyrolysis temperature, and pyrolysis time.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.534-538
• /
• 2017

In this study, the molecular weight controlled pitches derived from pyrolyzed fuel oil (PFO) were prepared using solvent extraction and were carbonized. Electrochemical characteristics of lithium battery anode materials were investigated using these petroleum pitches. Three pitch samples prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3 h), 4001 (at $400^{\circ}C$ for 1 h) and 4002 (at $400^{\circ}C$ for 2 h). The prepared hexane insoluble pitches were analysed by XRD, TGA, SEM and Gel permeation Chromatography (GPC). The electrochemical characteristics of the PFO-derived pitch as an anode material were investigated by constant current charge/discharge, cyclic voltammetry and electrochemical impedance tests. The coin cell using pitch (4001) and the electrolyte of $LiPF_6$ in organic solvents (EC : DMC = 1 : 1 vol%, VC 3 wt%) has better initial capacity (310 mAh/g) than that of other pitch coin cells. Also, this carbon anode showd a high initial efficiency of 82%, retention rate capability at 2 C/0.1 C of 90% and cycle retention of 85%. It was found that modified pitches improved the cycling and rate capacity performance.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.297-302
• /
• 2019

In order to investigate structural changes of the pyrolysis fuel oil (PFO), the volatile matters and heavy oil fractions were separated from PFO by heat treatment temperature. As a result of $^1H-NMR$ analysis of volatile matters, 1~2 ring aromatic compounds contained in the petroleum residue were mostly removed at a temperature before $340^{\circ}C$. Moreover, new peaks corresponding to aliphatic hydrocarbons were detected at the chemical shift of 2.0~2.4 ppm. It is attributed that the aliphatic hydrocarbon sidechain was cracked from the aromatic compound by the cracking reaction occurred at $320^{\circ}C$. The C/H mole ratio and aromaticity increased with increasing the heat treatment temperature. Therefore, from the structural analysis results of heavy oil fractions and volatile matters from PFO, the decomposition of the aliphatic sidechain by cracking reaction and the separation of volatile matters by boiling point of components were mostly affected structure changes of the PFO.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.544-547
• /
• 1987

Pulmonary vein wedge angiography was applied to two patients of 2 years old TOF with PFO. Left pulmonary artery was not visualized by standard right ventriculogram and catheter was not entered into main pulmonary artery. Through PFO and left atrium, pulmonary vein wedge angiography at left lower pulmonary vein was done. The ipsilateral pulmonary artery & its trees in both cases and the contralateral pulmonary artery in one case were well visualized. Dangerous complication, such as massive bronchoconstriction due to extravasation of contrast material into the bronchus, was not developed. Mild coughing was occurred, but well tolerable in both cases. We recommended a dose of 0.8 mL/Kg of contrast material at a rate of 2 to 3 mL/sec and 1 to 2 mL/Kg of flush solution at the same rate by the hand, and routine use of pulmonary vein wedge angiography in cyanotic patients whose pulmonary artery was not visualized by the standard angiography.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.408-412
• /
• 2005

Porous layered carbon was prepared by interlayer pyrolysis of pyrolysis fuel oil (PFO) using magadiite template and successive dissolution of template. Particle morphology was plate type with d-spacing of approximately 0.7 nm and it had constant interlayer space. Specific surface area was $147{\sim}385m^2/g$ depending upon template type, mixing ratios and pyrolysis time.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2010

To investigate pollution level of PFOA and PFOS in ambient air, Cheongju city, gaseous and particulate samples were collected at industrial, residential/commercial, and rural region, respectively. Samples were collected in winter, spring, and summer season in order to examine seasonal variation of PFOA and PFOS. The concentration range of PFOA and PFOS was presented as N.D.~8.02 pg/$m^3$ with an average of 2.33 pg/$m^3$, 1.68~6.94 pg/$m^3$ with an average of 3.12 pg/$m^3$. These levels were lower than or similar to those of other countries.