• 한국재료학회지
• /
• 제3권5호
• /
• pp.459-465
• /
• 1993

SOG박막 밑에 층간 절연박으로 사용하는 PECVD산화막을 Si rich산화막으로 만들어 줌으로써 실리콘 dangling bond가 수소원자나 수분과 결합하여 SOG박막으로 부터 침투되는 수소원자나 수분의 확산을 억제하므로서 소작 열화되는 것을 방지한다. 이러한 Si rich산화막의 기본 특성을 알아보기 위하여 LF/HF power비와 $SiH_4/N_2O$ gas유량비를 변화시켜서 박막 특성을 조사하였다. 저주파 power만 변화시킨 경우, 증착속도가 감소하고 굴절율과 압축응력에 증가하며 FTIR에서 3300$\textrm{cm}^{-1}$~3800$\textrm{cm}^{-1}$영역의 수분에 의한 peak이 감소하는 것으로 보아 박막이 치밀해짐을 알 수 있고, $SiH_{4}$기체유량을 증가시킨 경우엔 증착속도, 굴절율, 식각속도는 증가하나 압축응력은 감소한다. FTIR에서 Si-O-Si peak의 세기가 감소하고 낮은 파수영역으로 이동하며, AES분석 결과에서 일반적인 oxide(Si:0=1:1.98)에서 보다 Si:O비가 1:1.23으로 낮아 PECVD산화 막내의 Si danling bond가 증가했음을 알 수 있었다.

• 한국재료학회지
• /
• 제5권6호
• /
• pp.633-638
• /
• 1995

열산화 및 PECVD법으로 p-type(100)Si wafer위에 $Ta_2O_{5}$, 박막을 형성한 후 이들 박막의 전기적 특성과 박막응력 상호간의 관계를 연구하였다 열산화 시편의 경우 dc magnetron sputtering법으로 Ta을 증착시킨 후에 산화온도와 시간을 변수로 열산화시켜 박막을 형성시켰으며 PECVD 시편의 경우 RF power density를 변화시켜가면서 박막을 형성시켰다. 이들 박막의 전기적 특성과 박막응력을 조사하여 전기적 특성과 박막응력 상호간의 관계를 조사한 결과 열산화 박막의 경우 누설전류와 박막응력은 독립적인데 반해 PECVD 박막의 경우 박막응력의 절대값은 누설전류가 증가함에 따라 증가하였다.

• 반도체디스플레이기술학회지
• /
• 제7권4호
• /
• pp.35-39
• /
• 2008

We studied deposition of low-k SiOCH dielectric film by PECVD. DEMS(diethoxymethlysilane) precursor, which has two ethoxy groups along with one methyl group attached to the silicon atoms, was used as precursor. The SiOCH film was deposited as a function of oxygen flow rates ranging from 0 to 100sccm. The deposition rate($\AA$/min) of SiOCH film was increased due to the increase of oxygen radical as a function of $O_2$ flow rates. The dielectric constant was decreased from 3.0 to 2.77, as the film was annealed at $450^{\circ}C$ for 30 min. So, it could account that the dielectric constant changes sensitively with $O_2$ flow rates. Also, the leakage current of the annealed film exhibited stable curve than that of asdeposited. These results were caused by the increase of Si-O-Si group and decrease of Si-CH group and OH group within the film by annealing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1707-1709
• /
• 1999

Insulating thin films for strain gauge application, such as $SiO_2$ single layers and $SiO_2/Si_3N_4$ multilayers, are deposited by using both PECVD and RF magnetron sputtering techniques. Micro-structural analysis and electrical characterization are carried out on those films. It has been observed that PECVD films have a smoother surface and a denser micro-structure than sputter films. It should be also found out that the electrical insulation property of $SiO_2$ film can be significantly improved by adding the $Si_3N_4$ layer.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.666-672
• /
• 2014

We have investigated the gate insulator effects on the electrical performance of p-type tin monoxide (SnO) thin-film transistors (TFTs). Various SnO TFTs are fabricated with different gate insulators of a thermal $SiO_2$, a plasma-enhanced chemical vapor deposition (PECVD) $SiO_x$, a $150^{\circ}C$-deposited PEVCD $SiO_x$, and a $300^{\circ}C$-deposited PECVD $SiO_x$. Among the devices, the one with the $150^{\circ}C$-deposited PEVCD $SiO_x$ exhibits the best electrical performance including a high field-effect mobility ($=4.86cm^2/Vs$), a small subthreshold swing (=0.7 V/decade), and a turn-on voltage around 0 (V). Based on the X-ray diffraction data and the localized-trap-states model, the reduced carrier concentration and the increased carrier mobility due to the small grain size of the SnO thin-film are considered as possible mechanisms, resulting in its high electrical performance.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.362-367
• /
• 2008

We have Manufactured the low-k dielectric interlayer fabricated by plasma enhanced chemical vapor deposition (PECVD), The thin film of SiOCH is studied correlation between components and Dielectric constant. The precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1sccm step in the constant flow rate of 60 sccm $O_2$ in process chamber. The chemical characteristics of SiOCH were analyzed by measuring FT/IR absorption lines and obtained each dielectric constant measuring C-V. Then compare respectively. ILD of BTMSM/$O_2$ could have low dielectric constant about $k\sim2$, and react sensitively. Also dielectric constant could be decreased by the effects of decreasing $CH_3$ and growing Si-O-Si(C) after annealing process.

• 전기의세계
• /
• 제32권10호
• /
• pp.616-625
• /
• 1983

본고에서는 PECVD의 기본원리와 장치를 간단히 설명한 후, 현재까지 PECVD법에 의해 형성된 박막중 반도체소자에의 적용을 위해 광범위하게 연구개발이 진행되고 있는 plasma silicon nitride (이하 PD SiN)와 plasma silicon dioxide (or oxide) (이하 PD SiO$_{2}$)막의 특성에 대해 현재까지의 연구결과를 중심으로 PECVD막의 성질을 고찰하고, 반도체 소자에의 응용을 검토한다.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.544-551
• /
• 2008

We have studied the dielectric characteristics of low-k interlayer dielectric materials fabricated by PECVD for various precursor's flow rates. BTMSM precursor was introduced with the flow rates from 42 sccm to 60 sccm by 2 sccm step in the constant flow rate of 60 sccm $O_2$. The absorption intensities of Si-O-$CH_x$ bonding group and Si-$CH_x$ bonding group changed synchronously for the variation of precursor flow rate, but the intensity of Si-O-Si(C) responded asynchronously with the $CH_x$ combined bonds. The heat treatment reduced the FTIR absorption intensity of Si-O-$CH_x$ bonding group and Si-$CH_x$ bonding group but increased the intensity of Si-O-Si(C). The nanopore and free space formed by the increasement of caged link mode and cross link mode of Si-O-Si(C) group implied the origin of low-k SiOCH films.

• 반도체디스플레이기술학회지
• /
• 제7권1호
• /
• pp.41-45
• /
• 2008

We studied the electrical characteristics of low-k SiOCR interlayer dielectric(ILD) films fabricated by plasma enhanced chemical vapor deposition (PECVD). The precursor bis-trimethylsilylmethane (BTMSM) was introduced into the reaction chamber with the various flow rates. The absorption intensities of Si-O-$CH_x$, bonding group and Si-$CH_x$, bonding group changed synchronously for the variation of precursor flow rate, but the intensity of Si-O-Si(C) responded asynchronously with the $CH_x$, combined bonds. The SiOCH films revealed ultra low dielectric constant around 2.1(1) and reduced further below 2.0 by heat treatments.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.115.2-115
• /
• 1993