• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.67-75
• /
• 1992

A new method of driving the PDP(Plasma Display Panel) was proposed and its characteristics were investigated. Applying high frequency non-discharge pulses to an auxiliary anode resulted an increased region of stable operation, decreased delay time and increased light intensity. It is suggested that PDP with DPM (Double Pulse Memory) drive technique improves the delay time, luminance, region of stable operation and luminous efficacy compared to PDP with PPM(Planar Pulse Memory) drive technique developed by NHK Lab. in Japan.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.693-698
• /
• 2002

For the evaluation of the plasma display panel (PDP)'s noise, vibration and sound characteristics of fanless PDP are measured and investigated. PDP is a type of two-electrode vacuum tube which operates on the same principle as a household fluorescent light. An inert gas such as argon or neon is injected between two glass plates on which transparent electrodes have been formed, and the glass is illuminated by generating discharge. For this discharge, both high voltage and currents are needed and cause an acoustic noise. We investigated the noise characteristics connected with both a electromagnetic elements from SMPS to panel through X, Y and logic board, and a mechanical elements form panel to case through transfer path which related with vibration and heat. To reduce the noise of PDP, a discharge pulse memory design related with both higher brightness and lower power consumption is important and mechanical characteristics connected with dissipation process of both heat and vibration generated by panel discharge must be investigated.

• 한국멀티미디어학회논문지
• /
• 제13권4호
• /
• pp.512-525
• /
• 2010

PDP(Plasma Display Panel) 프레임은 PDP의 핵심 부품으로 매월 수 십 만개 이상을 생산하고 있다. 대량생산 과정에서 제품의 검사 과정은 매우 중요한 공정 단계이며 제품의 신뢰성을 높이기 위해 모든 부품과 완제품에 대한 전수 검사가 종종 요구되고 있다. 본 논문에서 구현 하고자 하는 시각 검사 공정의 자동화는 생산 현장에서 컴퓨터 비전 기술을 이용하여 PDP 부품의 일부인 프레임의 결함을 검사한다. 본 논문은 PDP 프레임에 있는 홀(Hole), 탭홀(Tab), 스터드(STUD), 리벳(Rivet)의 결함을 검사하는 시스템을 설계하고 구현 하였다. 본 시스템은 다양한 종류의 PDP 프레임을 학습하고 검사 할 수 있다. 모든 제품에 대한 신속하고 정확하게 100% 검사를 함으로써 공정의 효율성을 높이고 검사결과의 데이터베이스화로 신속한 결함의 원인파악과 조치가 가능하도록 하였다. 시스템을 산업체에 적용한 결과 신속하고 정확한 검사가 가능함을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.239-242
• /
• 2005

A high speed address recovery technique for AC plasma display Panel(PDP) is proposed. By removing the GND switching operation, the recovery speed can be increased and switching loss due to GND switch also becomes to be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Thus, the technique shows the minimum address power consumption according to various displayed images, different from Prior methods operating in fixed mode regardless of images. Test results with 50" HD single-scan PDP(resolution = 1366$\times$768) show that less than 350ns of recovery time is successfully accomplished and about 54% of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.256-259
• /
• 2006

Comparison of one two-path single energy recovery circuit for plasma display panel (PDP) is shown in this paper. A single energy recovery circuit (SERC) is proposed to reduce cost for manufacturing PDP and there are two ways, one and two-path, in driving this circuit. Compared with one-path SERC, there are low power consumption, low surge current and high performance in two-path SERC. The results will be shown with 42-inch HD panel.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권9호
• /
• pp.450-453
• /
• 2005

A high speed address recovery technique for AC plasma display panel(PDP) is proposed. Replacing GND switch by clamping diode. the recovery speed can be increased by saving GND hold-time and switching loss due to GND switch also becomes also be reduced. The proposed method is able to perform load-adaptive operation by controlling the voltage level of energy recovery capacitor, which prevents increasing inefficient power consumption caused by circuit loss during recovery operation. Test results with 50' HD single-scan PDP(resolution = 1366$\times$768) show that less than 3sons of recovery time is successfully accomplished and about$54\%$ of the maximum power consumption can be reduced, tracing minimum power consumption curves.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.58-58
• /
• 1999

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.53-56
• /
• 2002

Samsung's newly developed high luminance efficiency 42" VGA plasma display panel is introduced. A new discharge cell structure, SDR (Segmented electrode in Delta color arrayed Rectangular subpixel) has been applied to a full size panel for the first time. In this paper, we describe how this new discharge cell structure for high efficiency is integrated to an energy saving plasma display with better picture quality.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권1호
• /
• pp.37-40
• /
• 2001

New package process for PDP was proposed based on the glass-to-glass vacuum-electrostatic bonding process and tubeless packaging concept derived from the previous study. Hermeticity and operating performance of PDP test panel through the seal-off process application and the possibility for practical use might be high if the process simplicity and productivity-related effort was sequentially carried out.

• 인포메이션 디스플레이
• /
• 제3권6호
• /
• pp.3-7
• /
• 2002

차세대 디스플레이로 부각되는 FPD(Flat Display Panel) 가운데 Digital TV 및 산업용 Display로 각광 받고 있는 PDP(Plasma Display Panel)는 최근 LCD, Projection Display 등의 비약적인 기술발전으로 인한 치열한 경쟁 속에서도 지속적인 기술발전을 거듭하고 있다. PDP는 자발광 Display로서 CRT에 버금가는 밝기, 선명성, 넓은 시야각, 색재현력 등의 장점을 가지고 있으며 소비전력, 발광효율, 감성화질 등의 향상에 노력을 경주하고 있다. 본 소고에서는 이러한 PDP의 고화질 기술동향에 대해 알아보겠다.