본 연구에서는 atom transfer radical polymerization (ATRP)에 의해 polydimethylsiloxane (PDMS)와 methyl-methacrylate (MMA)로부터 polydimethylsiloxane-polymethylmethacrylate (PDMS-PMMA) block copolymer를 합성하였다. 합성된 PDMS-b-PMMA copolymer막의 특성은 FT-IR, $^1H$ NMR, GPC, DSC 등을 사용하여 조사하였다. 질소와 수소의 투과도는 각각 $1.2{\sim}l.5$ barrer와 $6.2{\sim}10.5$ barrer를 보였고, 질소에 대한 수소의 선택도는 $5.3{\sim}6.9$ 범위였다. PDMS-b-PMMA copolymer 막의 투과도와 선택도는 PDMS 막보다는 낮은 값을 보였고, PMMA 막보다는 높은 결과를 보였다.
A new stamp fabrication technique for the soft lithography has been developed in the range of several microns by means of a nano-replication printing (nRP) process. In the nRP process, a figure or a pattern can be replicated directly from a two-tone bitmap figure with nano-scale details. A photopolymerizable resin was polymerized by the two-photon absorption which was induced by a femtosecond laser. After the polymerization of master patterns, a gold metal layer (about 30 ㎚ thickness) was deposited on the fabricated master patterns for the purpose of preventing a join between the patterns and the PDMS, then the master patterns were transferred in order to fabricate a stamp by using the PDMS (poly-dimethylsiloxane). In the transferring process, a few of gold particles, which were isolated from the master patterns, remained on the PDMS stamp. A gold selective etchant, the potassium iodine (KI) was employed to remove the needless gold particles without any damage to the PDMS stamp. Through this work, the effectiveness of the nRP process with the PDMS molding was evaluated to make the PDMS stamp with the resolution of around 200 ㎚.
다양한 폴리디메틸실록산계 공중합체를 안정화제로 이용하여 초임계 이산화탄소 내에서의 개환중합을 통해 PLLA를 제조하였다. 초임계 개환중합에 사용된 폴리디메틸실록산 공중합체는 폴리디메틸실록산 거대개시제를 사용하여 그룹전이중합법(GTP법)을 이용하여 제조하였다. $\small{L}$-락타이드의 초임계 현탁중합을 통해 수미크론크기의 입자가 형성되었음을 전자 주사 현미경을 통해 확인하였고, 또한 겔 투과 크로마토 그라피 분석을 통해 상당히 좁은 분자량 분포의 PLLA가 제조되었음을 확인하였다.
필름 형태의 Polydimethylsiloxane (PDMS)은 표면 개질을 하기 위해 Plasma 처리 또는 Corona 처리를 하여 표면을 -OH기로 활성화시키는 공정이나, 피착제와 PDMS 필름의 접착 또는 Adhesion promoter와 축합 반응을 통해 PDMS 표면을 다른 작용기로 개질시키는 공정, Grafting polymerization을 이용하는 PDMS 개질 공정이 주로 이용된다. 그러나 Plasma나 Corona 처리 후에 친수성이 오래가지 못하고, 보관에 어려움이 있다. 따라서, 본 연구에서는 코팅 공정을 통하여서 PDMS표면 개질을 하기 위해서, 먼저 새로운 형태의 실란 기능화 아크릴 고분자 전구체를 합성하고 이를 Hydroxyl-terminated PDMS와의 축합 반응을 통해 아크릴 고분자와 PDMS 고분자가 결합된 형태의 표면 개질제를 제조한 후, 이를 PDMS 필름 위에 코팅하였다. 제조한 표면 개질제의 구조와 분자량을 확인하기 위하여 1H-NMR과 GPC를 분석하였고, 표면 개질제가 코팅된 PDMS표면 특성 변화를 확인하기 위하여 XPS, ATR, WCA를 이용하여 표면 특성을 조사하였으며, PDMS 필름과의 부착을 확인하기 위해 Cross cutting test를 진행하였다. 그 결과 PDMS 필름 표면이 아크릴 고분자층이 형성된 것으로 확인하였고, PDMS 필름과 표면 개질제와의 부착성 (4 - 5B) 또한 우수한 것을 확인하였다.
Glycidyl methacrylate linked poly(dimethylsiloxane) (GMA-PDMS) was synthesized and used as a stabilizer for the dispersion polymerization of methyl methacrylate (MMA) in supercritical $CO_2$. This study examined the effect of the concentrations of the stabilizer, 2,2'-azobisisobutyronitrile (AIBN) initiator, and MMA on the yield, molecular weight, and morphology of the poly(methyl methacrylate) (PMMA) product. PMMA was obtained in 94,6% yield using only 0,87 wt% GMA-PDMS, When the AIBN concentration was increased from 025 to 1.06 wt%, the molecular weight and particle size of the PMMA decreased from 56,600 to 21,600 and from 4.1 to $2.7{\mu}m$, whereas the particle size distribution increased from 1.3 to 1.9. The $M_n$ of the PMMA product ranged from 41,600 and 55,800 under typical polymerization conditions. The PMMA particle diameter ranged from 1.8 to $11.0{\mu}m$ and the particle size distribution ranged from 1.4 to 1.8.
Triblock copolymers of poly(dimethylsiloxane) (PDMS) middle block and degradable polyester end blocks were synthesized by the ring open polymerization initialed by alcohol groups of PDMS. Surface composition of the triblock copolymers is measured by angle-dependent electron spectroscopy for chemical analysis. The PDMS blocks are segregated in the topmost surface region and constituted up to 90 mol% of the surface, even though the overall bulk PDMS concentrations of the block copolymers is 6% or less. This result suggests that the bulk property of degradable polyesters is essentially unchanged due to the high surface segregation of PDMS.
폴리올레핀 중합공정에서 발생되는 미반응 올레핀 모노머를 회수하기 위한 분리막/냉각응축 공정에 적용할 복합막을 용액 코팅공정과 플라즈마 중합공정의 두가지 방법으로 제조하였다. Polysulfone (PSF) 지지체 위에 poly(dimethylsiloxane) (PDMS) 용액을 코팅하였고 코팅 용액에서 prepolymer의 함량이 높을수록 올레핀 모노머의 선택도는 증가하였으나 막이 치밀하여지는 관계로 절대 투과량은 감소하는 경향을 보였다. 유기물의 복합막 투과는 용액확산 메커니즘에 의한 것으로서 임계온도가 높을수록 분리효율은 향상되고 molar volume이 증가할수록 투과도가 향상되었다. 또한 가교시간에 siloxane 계열의 물질을 plasma 종합하여 복합막을 제조하였는데 PSF 및 polypropylene (PP) 지지체를 사용하였다. 특히 지지체로 기존의 용액코팅 공정에서 사용되기 어렵던 PP 지지체 위에도 복합막을 코팅할 수 있었으며 용액코팅 공정으로 제조된 복합막과 유사한 성능을 나타내었다.
EPDM에 maleic anhydride를 그래프트시켜 말레화 EPDM(MEPDM)을 제조하고 여기에 양 말단에 hydroxyl기를 갖는 $\alpha$,$\omega$-poly(dimethylsiloxane)(PDMS)을 반응시켜 MEPDM-g-PDMS 공중합체를 제조하였다. MEPDM-g-PDMS와 HDFE 및 4-ethoxybenzoic acid로 표면처리된 MWCNT를 internal mixer에 가하고 $180^{\circ}C$에서 컴파운딩하여 MEPDM-g-PDMS/HDPE/CNT 복합체를 제조하였다. 복합체에서 CNT의 모폴로지를 전자현미경으로 측정한 결과 표면처리된 CNT를 사용한 경우가 분산이 균일하게 이루어졌으며 입자의 응집현상도 감소되는 것으로 나타났다. 온도변화에 따른 전기저항은 용융온도부근에서 전기저항이 급격히 증가하였으며 EtO-CNT의 함량을 15%로 하여 제조한 복합체의 경우가 PTC intensity가 2.3으로 가장 우수한 PTC 특성을 나타내었다.
프로필 술폰산으로 개질된 메조기공 실리카 고체 산 촉매를 octamethylcyclotetrasiloxane (D4)의 양이온 개환중합을 위해 합성하였다. 서로 다른 기공 크기를 갖는 두 세트의 MCM-41 (1.7 및 2.8 nm) 및 SBA-15 (8.1 및 15.9 nm)을 촉매의 지지체로 사용하였고, 이를 (3-mercaptopropyl)trimethoxysilane으로 표면개질하고 산화시켜 술폰산으로 개질된 고체 산촉매를 제조하였다. 제조된 촉매는 기공 크기와 비표면적, 기공 부피가 약간씩 감소하였음을 X선 회절, 질소흡탈착을 통하여 확인하였다. 또한 적외선분광법과 핵자기공명법의 분광학적 방법을 이용하여 술폰산이 개질되었음을 확인하였다. 입도의 촉매 활성에 대한 효과를 관찰하기 위하여 주사전자현미경으로 관찰하였다. D4의 개환중합을 통한 PDMS 합성을 위하여 촉매를 사용하였으며, 중합 반응의 전환율과 중합 속도는 촉매의 기공 크기, 비표면적, 입자크기 및 입자의 응집도에 의존하였다. 중합 속도의 순서는 8.1 nm의 SBA-15으로 제조한 촉매가 가장 반응속도가 빨랐으며, 가장 좋은 촉매 활성을 보였다.
폴리(디메틸 실록산)(PDMS) 성분을 포함하는 폴리우레탄(PU-Si)을 합성하고 이들의 열적 특성과 형상기억 특성을 분석하였다. 이를 위하여 메틸렌디페닐 디이소시아네이트와 1,4-부탄디올을 하드세그먼트(HS) 성분으로 하고, 소프트세그먼트(SS) 성분으로 PDMS 디올과 폴리(테트라메틸렌 에테르 글리콜)(PTMEG) 혼합폴리올을 사용하여 HS 함량이 각각 23%와 32%이면서 PDMS 함량이 다른 PU-Si를 용액중합법으로 합성하였다. HS 함량이 23%인 PU-Si의 경우 PDMS 함량 증가에 따라 SS의 냉결정화온도($T_{cc}$)와 용융결정화온도는 증가하였으나 용융온도($T_m$)에는 변화가 없었다. HS 함량이 32%인 시료들의 경우 PTMEG의 $T_m$이 HS 함량 23%인 시료들보다 약간 높은 온도에서 나타났으며 $T_{cc}$는 관찰되지 않았다. PDMS 성분이 포함된 PU-Si 필름들은 PU에 비해 형태고정성은 약간 좋지 않지만 형상기억 효과는 더 우수하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.